T2M-110-01-L-D-SM-WT SAMTEC Connector (Other) In Stock
SAMTEC T2M-110-01-L-D-SM-WT is a 20-position, dual-row, 2.00 mm pitch SMT board connector with male contacts finished in matte tin over nickel. Measuring approximately 1.01 inch body length, this surface mount connector suits high-density board-to-board and wire-to-board signal interconnects. Available with 1-week factory lead time and worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 22
- Lifecycle
- ACTIVE
- Datasheet
- T2M-110-01-L-D-SM-WT Datasheet PDF
- Category
- Connector
- Temp Range
- -55.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-row male board connector with matte tin over nickel contact finish for reliable electrical performance in standard SMT assembly
- 2.00 mm pitch dual-row layout enables compact 20-position signal routing in a 1.01 inch body length
- Short 1-week factory lead time and SMT termination style streamline procurement and automated PCB assembly for production runs
Applications
T2M-110-01-L-D-SM-WT is suited for board-to-board and wire-to-board signal connections in industrial control panels, consumer electronics, and embedded system modules where 2.00 mm pitch dual-row headers are specified. Its SMT footprint integrates easily into automated reflow assembly lines, supporting compact designs in IoT gateways and portable instrumentation. The matte tin contact finish provides a cost-effective solderability solution for high-volume production environments.
Specifications
| Pbfree Code | Yes |
| Factory Lead Time | 1Week |
| YTEOL | 8.4 |
| Body Breadth | 0.293inch |
| Body Depth | 0.258inch |
| Body Length | 1.01inch |
| Connector Type | BOARD CONNECTOR |
| Contact Finish Mating | NOT SPECIFIED |
| Contact Finish Termination | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | MALE |
| Contact Material | NOT SPECIFIED |
| Contact Pattern | RECTANGULAR |
| Contact Style | SQ PIN-SKT |
| Filter Feature | NO |
| Insulator Color | BLACK |
| Insulator Material | LIQUID CRYSTAL POLYMER |
| JESD-609 Code | e3 |
| Mating Contact Pitch | 0.079inch |
| Mating Contact Row Spacing | 0.079inch |
| Mixed Contacts | NO |
| Mounting Option 1 | LOCKING |
| Mounting Style | STRAIGHT |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number Of PCB Rows | 2 |
| Number of Rows Loaded | 2 |
| PCB Contact Pattern | RECTANGULAR |
| Plating Thickness | 10u inch |
| Polarization Key | POLARIZED HOUSING |
| Rated Current (Signal) | 3.8A |
| Terminal Pitch | 2.0066mm |
| Termination Type | SURFACE MOUNT |
| Total Number of Contacts | 20 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
| Country of Origin | Malaysia, USA |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What contact finish and pitch does the T2M-110-01-L-D-SM-WT use for its dual-row SMT connector?
The T2M-110-01-L-D-SM-WT uses matte tin (Sn) over a nickel (Ni) barrier finish on its termination contacts, with a 2.00 mm pitch dual-row configuration. The nickel barrier improves adhesion and prevents copper migration, while matte tin ensures reliable solderability during reflow at standard 245°C to 260°C peak temperatures.
Which board-to-board or wire-to-board scenarios benefit from the T2M-110-01-L-D-SM-WT's 20-position layout?
The 20-position dual-row layout is well matched to applications needing 20 signal or mixed power-and-signal lines on a 2.00 mm pitch SMT footprint, including embedded module-to-baseboard interconnects and industrial sensor interface boards. The 1.01 inch body length fits within standard module form factors, supporting I2C, SPI, UART, and GPIO bus routing across stacked PCBs.
How does the 1-week lead time of the T2M-110-01-L-D-SM-WT compare to typical connector procurement timelines?
A 1-week factory lead time is significantly shorter than the 12- to 26-week lead times common for specialty connectors during supply chain constraints. This rapid availability reduces prototype-to-production cycle time, allowing engineering teams to complete board bring-up and early production builds without connector shortages delaying schedule milestones.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”