T1M-02-T-SV-L SAMTEC Connector (Other) In Stock
SAMTEC T1M-02-T-SV-L is a 2-position single-row vertical discrete wire terminal strip with 1.00 mm pitch, designed for ultra-fine-pitch wire termination on compact PCBs. The male contact pattern enables secure wire-to-board connections in miniaturized designs. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 2
- Lifecycle
- NOT RECOMMENDED
- Datasheet
- T1M-02-T-SV-L Datasheet PDF
- Category
- Connector
- Temp Range
- -55.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 2-position single-row vertical terminal strip on 1.00 mm pitch for ultra-compact wire-to-board connections
- Male rectangular contact pattern provides secure and repeatable wire engagement in discrete wire applications
- Compact body measuring approximately 0.882 x 0.217 inches fits into tight PCB layouts with minimal real estate
- Vertical mounting orientation facilitates straight-through wire routing in space-constrained enclosures
Applications
The T1M-02-T-SV-L is suited for compact consumer electronics, wearable devices, and portable instrumentation where ultra-fine 1.00 mm pitch discrete wire connections are required. Its 2-position layout is commonly used for power supply leads, sensor connections, and battery interfaces in miniaturized PCB assemblies. The vertical mounting style supports clean cable management in space-constrained enclosures.
Specifications
| YTEOL | 3 |
| Body Breadth | 0.167inch |
| Body Depth | 0.217inch |
| Body Length | 0.882inch |
| Connector Type | BOARD CONNECTOR |
| Contact Finish Mating | NOT SPECIFIED |
| Contact Finish Termination | NOT APPLICABLE |
| Contact Gender | MALE |
| Contact Material | NOT SPECIFIED |
| Contact Pattern | RECTANGULAR |
| Contact Style | SQ PIN-SKT |
| Filter Feature | NO |
| Insulator Color | NATURAL |
| Insulator Material | LIQUID CRYSTAL POLYMER |
| Mating Contact Pitch | 0.039inch |
| Mating Information | MULTIPLE MATING PARTS AVAILABLE |
| Mixed Contacts | NO |
| Mounting Option 1 | LOCKING |
| Mounting Style | STRAIGHT |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number Of PCB Rows | 1 |
| Number of Rows Loaded | 1 |
| Option | GENERAL PURPOSE |
| PCB Contact Pattern | RECTANGULAR |
| Rated Current (Signal) | 3.3A |
| Reference Standard | UL |
| Terminal Pitch | 1mm |
| Termination Type | SURFACE MOUNT |
| Total Number of Contacts | 2 |
| Withdrawl Force-Min | 2.22N |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pitch and position count does the T1M-02-T-SV-L provide for wire-to-board connections?
The T1M-02-T-SV-L offers 2 positions on a 1.00 mm pitch in a single-row vertical configuration. The 1.00 mm pitch is significantly finer than the common 2.54 mm (0.100-inch) pitch, enabling compact wire-to-board connections in miniaturized assemblies such as portable devices or wearable electronics where board space is at a premium.
What are typical design applications where the T1M-02-T-SV-L is used for discrete wire termination?
The T1M-02-T-SV-L is commonly used to connect discrete wires for power delivery or signal routing in portable medical devices, IoT sensor nodes, and compact consumer electronics. Its 2-position layout suits battery leads, switch connections, and LED power lines. The 1.00 mm pitch minimizes the connector footprint on a PCB board with limited space below 10 mm width.
How does the 1.00 mm pitch of the T1M-02-T-SV-L compare to standard 2.54 mm pitch connectors for board space savings?
At 1.00 mm pitch, the T1M-02-T-SV-L occupies less than half the spacing of a standard 2.54 mm pitch terminal strip for the same 2-position count. The body length of approximately 0.882 inches reflects SAMTEC's full connector width, but the 1.00 mm contact spacing allows adjacent circuitry to be placed significantly closer, improving routing density in dense PCB layouts.
Is the T1M-02-T-SV-L compatible with automated assembly or is it primarily for manual wiring?
The T1M-02-T-SV-L is designed for discrete wire termination rather than automated SMT placement and is typically assembled manually. Individual wires are inserted into the 2 positions on the 1.00 mm pitch connector and secured per the SAMTEC mating system. For automated SMT pick-and-place applications, SAMTEC offers surface-mount variants of similar pitch connectors, whereas the T1M series targets hand-assembled wiring harnesses.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”