STSPIN840 STMicroelectronics Integrated Circuit (Quad Flat No-Lead) In Stock
STMicroelectronics STSPIN840 is a dual full-bridge brushed DC motor controller integrating two H-bridge drivers in a compact 24-pin TFQFPN package with an exposed heat-sink slug. It supports dual-motor or single bipolar stepper motor control with current regulation, enabling efficient motion control in portable and industrial applications.
- Manufacturer
- STMicroelectronics
- Package
- Quad Flat No-Lead
- Pin Count
- 25
- Lifecycle
- ACTIVE
- Datasheet
- STSPIN840 Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.3787(MOQ 250)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of STSPIN840?
- Dual full-bridge topology enables simultaneous control of 2 brushed DC motors or 1 bipolar stepper motor from a single IC
- Integrated current sensing and regulation circuitry reduces external component count and simplifies motor torque control
- 24-pin TFQFPN package with exposed thermal slug dissipates heat efficiently, supporting higher continuous motor currents in compact designs
What is STSPIN840 used for?
The STSPIN840 is designed for battery-powered robotics, drones, and handheld tools requiring dual independent brushed DC motor control or bipolar stepper actuation in a small footprint. Its integrated current regulation and thermal slug make it equally applicable in industrial conveyor actuators and 3D printer carriage drives, where sustained motor currents and thermal headroom are critical within a space-constrained PCB layout.
What are the specifications of STSPIN840?
| Factory Lead Time | 25Weeks |
| YTEOL | 14 |
| Analog IC - Other Type | FULL BRIDGE BRUSH DC MOTOR CONTROLLER |
| JESD-30 Code | S-XQCC-N24 |
| JESD-609 Code | e4 |
| Number of Functions | 1 |
| Package Body Material | UNSPECIFIED |
| Package Equivalence Code | LCC24,.15SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage-Max (Vsup) | 45V |
| Supply Voltage-Min (Vsup) | 7V |
| Supply Voltage-Nom (Vsup) | 36V |
| Surface Mount | YES |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.60 |
| Country of Origin | Philippines |
Where can I find the STSPIN840 datasheet?
STSPIN840 Datasheet DownloadOfficial datasheet from STMicroelectronics
What are equivalent replacements for STSPIN840?
Compatible alternatives and drop-in replacements for STSPIN840:
suggested
suggested
suggested
suggested
Frequently Asked Questions
How many motor axes can the STSPIN840 control simultaneously, and what motor types does it support?
The STSPIN840 contains 2 independent full H-bridge channels, allowing simultaneous drive of 2 brushed DC motors or configuration as a single bipolar stepper motor driver. Each H-bridge independently handles direction and PWM speed control, enabling coordinated dual-axis motion in robotic platforms without additional driver ICs.
What package does the STSPIN840 use, and why does its thermal design matter for continuous motor drive?
The STSPIN840 is housed in a 24-pin TFQFPN package measuring approximately 4 mm x 4 mm with an exposed heat-sink slug on the bottom. The slug bonds directly to a PCB copper pour, reducing junction-to-board thermal resistance and allowing higher continuous motor currents compared to leaded packages of similar pin count.
Does the STSPIN840 include current sensing for motor torque control, and what benefit does this provide?
Yes, the STSPIN840 integrates current sensing and regulation circuitry internally. This allows the controller to limit peak winding current to a set reference level, protecting the motor from overcurrent during stall or sudden load increases, and reducing the need for external shunt resistors and op-amp sensing circuits.
For a compact 2-wheel differential-drive robot, what advantages does using a single STSPIN840 offer over two separate single H-bridge drivers?
Using one STSPIN840 instead of two separate drivers reduces BOM count from 2 packages to 1, saving approximately 16 mm² to 25 mm² of board area and cutting per-unit cost. Synchronous control timing is also simpler because both bridges share a common enable and logic supply, eliminating inter-IC skew in direction changes.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 250+ | $1.7277 | $431.93 |
| 500+ | $1.6324 | $816.20 |
| 2500+ | $1.5900 | $3975.00 |
| 4500+ | $1.4120 | $6354.00 |
| 18000+ | $1.4042 | $25275.60 |
| 36000+ | $1.3787 | $49632.12 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit