STM32L471RGT6TR STMicroelectronics Integrated Circuit (Quad Flat Packages) In Stock
STM32L471RGT6TR is an ultra-low-power 32-bit ARM Cortex-M4 MCU with FPU, 1 MB Flash, 128 KB SRAM, and 80 MHz clock in LQFP-64 package. From $8.00 in stock worldwide shipping.
- Manufacturer
- STMicroelectronics
- Package
- Quad Flat Packages
- Pin Count
- 64
- Lifecycle
- ACTIVE
- Datasheet
- STM32L471RGT6TR Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $4.6347(MOQ 25)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Ultra-low-power Cortex-M4 with FPU at 80 MHz delivering 100 DMIPS with Stop 2 mode under 1 µA for battery-powered IoT designs
- 1 MB Flash and 128 KB SRAM with DMA channels support complex firmware and real-time data buffering in industrial sensor applications
- Integrated 12-bit ADC, DAC, op-amp, and comparator with LQFP-64 package enables full analog signal chain without external components
Applications
STM32L471RGT6TR suits industrial IoT gateways, energy metering, and portable medical devices requiring large program memory and ultra-low power consumption. Its 1 MB Flash supports over-the-air firmware update stacks alongside application code, while Stop 2 mode under 1 µA extends battery life in smart meter and asset tracker designs. The 80 MHz Cortex-M4 with FPU handles real-time DSP tasks such as FFT-based vibration analysis and filter coefficient computation between low-power sleep intervals.
Specifications
| Factory Lead Time | 12Weeks |
| YTEOL | 9 |
| Has ADC | YES |
| Address Bus Width | 26 |
| Bit Size | 32 |
| Boundary Scan | YES |
| Clock Frequency-Max | 48MHz |
| DAC Channels | YES |
| DMA Channels | YES |
| External Data Bus Width | 16 |
| JESD-30 Code | S-PQFP-G64 |
| Number of I/O Lines | 51 |
| On Chip Program ROM Width | 8 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | SQUARE |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| RAM (bytes) | 131072 |
| ROM (words) | 1048576 |
| ROM Programmability | FLASH |
| Speed | 80MHz |
| Supply Voltage-Max | 3.6V |
| Supply Voltage-Min | 1.8V |
| Supply Voltage-Nom | 1.8V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Package | Quad Flat Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 3 |
| ECCN | 3A991.A.2 |
| HTS Code | 8542.31.00.25 |
| Country of Origin | Mainland China, Taiwan |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for STM32L471RGT6TR:
RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4 CPU, 80MHz, CMOS, PQFP64
RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4 CPU, 80MHz, CMOS, PQFP64
Frequently Asked Questions
How does the 1 MB Flash in the STM32L471RGT6TR enable OTA update capability in IoT deployments?
The STM32L471RGT6TR's 1 MB Flash allows partitioning into two 512 KB banks for dual-bank OTA firmware updates, enabling one bank to receive a new image while the other runs the active firmware. This architecture supports fail-safe rollback at 80 MHz without external NOR Flash, saving approximately $0.50 per unit in BOM cost versus designs requiring external memory chips.
For an energy meter design, what advantages do the integrated ADC and DAC of the STM32L471RGT6TR offer?
The STM32L471RGT6TR integrates a 12-bit ADC with up to 16 channels and a 12-bit DAC, enabling direct current and voltage sampling in single-phase energy meters without external signal chain ICs. Sampling at up to 1 Msps at 3.3 V supply, the integrated ADC meets Class 1 energy measurement accuracy for residential smart meters while reducing BOM cost by eliminating a dedicated metering AFE.
When should a designer choose the STM32L471RGT6TR tape-and-reel variant over the non-TR version for high-volume production?
Choose the STM32L471RGT6TR (TR suffix tape-and-reel) when production volumes exceed 1000 units per run, as the 3000-piece tape-and-reel packaging is compatible with pick-and-place automated SMT lines running at 64-pin LQFP footprint. The non-TR tray format suits prototyping and low-volume runs under 500 units, while the TR format reduces per-reel handling time by approximately 60% in high-volume factory environments.
Related Guides
150141RS73100 Red LED Indicator and Current-Resistor Design Guide
Design a reliable 150141RS73100 red LED indicator with worst-case resistor sizing, GPIO checks, PWM drive, layout, and production validation.
Jul 11, 2026
742792651 Ferrite Bead EMI Filter and Power Integrity Design Guide
Practical guidance for using 742792651 in ferrite-bead EMI filters, including bias, DCR, damping, layout, and validation.
Jul 11, 2026
How to Choose a Ferrite Bead for EMI Suppression Rails: Selection Guide
Compare 742792651 and related ferrite beads by impedance, current rating, DCR, package, layout, and EMI test context.
Jul 10, 2026
150141BS73100 Design Guide for 3528 Status Indicator LED Circuits
Design 3528 status indicator LED circuits with 150141BS73100: current setting, resistor sizing, polarity, optics, and sourcing checks.
Jul 10, 2026
Why Buy from FindMyChip
About STMicroelectronics
STMicroelectronics is a global semiconductor leader serving customers across the spectrum of electronics applications. ST's products are found in a wide range of applications including automotive, industrial, personal electronics, and communications.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 25+ | $6.4440 | $161.10 |
| 100+ | $5.8938 | $589.38 |
| 250+ | $5.7148 | $1428.69 |
| 500+ | $5.7000 | $2850.00 |
| 1000+ | $5.1500 | $5150.00 |
| 4000+ | $4.6347 | $18538.64 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”