SN75176AD Texas Instruments interface-ics (PDIP) In Stock
SN75176AD is a half-duplex RS-485/RS-422 differential bus transceiver in 8-pin PDIP from Texas Instruments, supporting up to 10Mbps, 5V supply, -40 to 85 degrees C industrial range. In stock from $0.60/unit, 1 piece MOQ, ships worldwide.
- Manufacturer
- Texas Instruments
- Package
- PDIP
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- SN75176AD Datasheet PDF
- Category
- interface-ics
- Price
- From $0.3304(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Applications
Widely used in industrial automation for long-distance serial communication over RS-485 networks. Suitable for PLCs, motor drives, building control systems, and instrumentation where robust differential signaling is required in noisy environments.
Specifications
| Supply Voltage | 4.75V to 5.25V |
| Data Rate | 10Mbps |
| Interface Type | RS-485 / RS-422 |
| Number of Drivers/Receivers | 1 Driver / 1 Receiver |
| Operating Temperature | -40 to +85 degrees C |
| Output Current | 60mA |
| Logic Family | Bipolar |
| Package | 8-pin PDIP |
| Package | PDIP |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for SN75176AD:
Frequently Asked Questions
What is the SN75176AD used for?
The SN75176AD is a half-duplex RS-485/RS-422 differential bus transceiver used for long-distance, noise-immune serial communication. It is widely used in industrial PLCs, building automation, motor drive controllers, and instrumentation systems where reliable data transmission over twisted-pair cable is required.
What are the key electrical specifications of SN75176AD?
The SN75176AD operates from a 5V supply (4.75V to 5.25V), supports data rates up to 10Mbps, has a driver output current of 60mA, and works over an industrial temperature range of -40 to +85 degrees C. It features one driver and one receiver in a half-duplex configuration.
What package is the SN75176AD available in?
The SN75176AD comes in an 8-pin PDIP (Plastic Dual In-line Package), suitable for through-hole PCB assembly. The D suffix in the part number denotes the SOIC package variant from TI naming convention.
What are compatible replacement parts for SN75176AD?
Compatible replacements include the SN75176BD (improved version with wider common-mode range), MAX485, and SP485. These parts share the same RS-485 half-duplex transceiver function and 8-pin pinout, though operating parameters may differ slightly.
Is the SN75176AD RoHS compliant?
Yes, the SN75176AD is RoHS compliant and lead-free. Texas Instruments has transitioned this part to meet RoHS Directive requirements, making it suitable for environmentally conscious designs and products sold in the EU market.
Related Guides
DP83848 10/100 Mbps Ethernet PHY Transceiver: How to Choose the Right Variant
A complete selection guide for the DP83848 family: compare temperature grades, packages, JTAG support, and interface options across all five variants.
Jun 2, 2026
LM5156 Wide-VIN Boost/SEPIC/Flyback Controller: How to Choose the Right Variant
A concise selection guide for the LM5156 and LM51561 family: how to choose between automotive vs industrial grade, spread-spectrum vs fixed-frequency, and WSON-8 vs HTSSOP-14 package.
Jun 2, 2026
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.6000 | $0.60 |
| 9+ | $0.4800 | $4.32 |
| 560+ | $0.3573 | $200.09 |
| 730+ | $0.3439 | $251.05 |
| 910+ | $0.3304 | $300.66 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”