SN74LV08ANSR-P Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
SN74LV08ANSR-P is a quad 2-input AND gate logic IC by Texas Instruments, fabricated in low-voltage CMOS technology. Key specs: 1.65 V to 5.5 V supply range, 32 mA output drive capability, and –40 °C to +85 °C operating temperature. Available from stock with worldwide shipping.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- SN74LV08ANSR-P Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Quad 2-input AND gate with 1.65 V to 5.5 V supply range enabling mixed-voltage system interfacing without level translators
- 32 mA output drive current per channel for direct LED drive or bus loading in high-fan-out designs
- NSR small-outline package with reduced lead count for compact PCB layouts in portable and space-constrained applications
Applications
The SN74LV08ANSR-P is used in microcontroller-based systems for logic gating, signal enable/disable control, and address decoding where a wide supply range from 1.65 V to 5.5 V is required. Its quad configuration allows four independent AND operations on a single chip, reducing component count in digital control circuits for consumer electronics, industrial controllers, and communication equipment. The device is also applied in battery-powered IoT nodes where low-voltage CMOS operation minimizes quiescent current.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for SN74LV08ANSR-P:
Frequently Asked Questions
What supply voltage range does the SN74LV08ANSR-P support and how does that benefit mixed-voltage designs?
The SN74LV08ANSR-P operates from 1.65 V to 5.5 V, covering both 1.8 V and 3.3 V digital rails as well as legacy 5 V systems. This wide range allows the same AND-gate device to be used across different board generations or sub-systems without redesign, simplifying inventory and reducing qualification effort for multi-voltage embedded platforms.
How many AND gates does the SN74LV08ANSR-P contain and what logic family is it compatible with?
The SN74LV08ANSR-P contains 4 independent 2-input AND gates in a single NSR small-outline package, making it compatible with 74LV family logic. Each gate has input thresholds aligned with standard CMOS levels, ensuring direct interface with 3.3 V microcontrollers, FPGAs, and 5 V TTL outputs without external pull-up resistors or level-shift circuits in most configurations.
What is the output drive current of the SN74LV08ANSR-P and can it directly drive an LED?
Each output of the SN74LV08ANSR-P can sink or source up to 32 mA, which is sufficient to drive a standard 20 mA LED indicator directly with an appropriate current-limiting resistor of around 68 Ω to 100 Ω on a 3.3 V rail. This eliminates the need for a separate buffer or driver stage in simple status-indicator circuits, reducing BOM cost and PCB space.
Over what temperature range does the SN74LV08ANSR-P operate and is it suitable for industrial environments?
The SN74LV08ANSR-P is rated for –40 °C to +85 °C operation, which covers the full industrial temperature range. This makes it suitable for factory automation control panels, motor drive auxiliary logic, HVAC controllers, and other industrial environments where ambient temperatures regularly exceed the 0 °C to 70 °C commercial grade limit.
How does SN74LV08ANSR-P compare to the SN74HC08 for a 3.3 V logic design?
The SN74LV08ANSR-P and SN74HC08 both provide quad 2-input AND gates, but the LV variant supports supply voltages as low as 1.65 V versus 2 V minimum for HC, and guarantees proper CMOS-compatible input thresholds at 3.3 V supply where HC devices may have marginal switching levels. For new 3.3 V designs, SN74LV08ANSR-P is generally preferred for guaranteed timing and drive specs at that voltage.
Related Guides
EEEFK1E470P Selection Guide for 47 uF SMD Aluminum Electrolytic Capacitors
Selection guidance for EEEFK1E470P and nearby Panasonic FK or FT SMD aluminum electrolytic capacitors for power-rail bulk decoupling.
Jul 7, 2026
EEEFT1V101AP Design Guide for SMD Aluminum Electrolytic Bulk Decoupling
Design guidance for using EEEFT1V101AP as an SMD aluminum electrolytic bulk capacitor in power-rail decoupling and hold-up networks.
Jul 7, 2026
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”