SN74LS125ANE4 Texas Instruments Integrated Circuit (Dual-In-Line Packages) In Stock

The SN74LS125ANE4 is a quad bus buffer with 3-state outputs in a 14-pin DIP package, providing four independent active-low-enabled buffer channels. It operates from a 4.75 V to 5.25 V supply with 24 mA sink current, suitable for TTL bus driving and signal isolation in logic systems.

OBSOLETEIntegrated CircuitVerified May 2026
Package / Visual Reference
SN74LS125ANE4Dual-In-Line Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Dual-In-Line Packages
Pin Count
14
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
?°C to 70.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of SN74LS125ANE4?

  • Quad-channel bus buffer with independent active-low 3-state enables
  • TTL-compatible operating supply of 4.75 V to 5.25 V
  • 24 mA output sink current with 45 pF load capacitance rating
  • Unidirectional signal path suitable for bus-isolation applications
  • 14-pin PDIP package for easy prototyping and through-hole assembly
  • LS-family TTL logic with standard propagation delay characteristics

What is SN74LS125ANE4 used for?

The SN74LS125ANE4 is used in microprocessor-based systems to buffer and isolate address or data bus signals, preventing bus contention when multiple devices share a common line. It suits backplane driver circuits, memory bank selection, and legacy TTL system designs where 5 V bus driving with 3-state control is required. Prototyping boards and through-hole industrial control systems also rely on it for dependable signal buffering.

What are the specifications of SN74LS125ANE4?

Pbfree CodeYes
YTEOL0
Control TypeENABLE LOW
Count DirectionUNIDIRECTIONAL
FamilyLS
JESD-30 CodeR-PDIP-T14
JESD-609 Codee4
Load Capacitance (CL)45pF
Logic IC TypeBUS DRIVER
Max I(ol)0.024A
Number of Bits1
Number of Functions4
Number of Ports2
Output Characteristics3-STATE
Output PolarityTRUE
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeDIP14,.3
Package ShapeRECTANGULAR
Package StyleIN-LINE
Packing MethodTUBE
Power Supply Current-Max (ICC)20mA
Prop. Delay@Nom-Sup18ns
Propagation Delay (tpd)18ns
Qualification StatusNot Qualified
Supply Voltage-Max (Vsup)5.25V
Supply Voltage-Min (Vsup)4.75V
Supply Voltage-Nom (Vsup)5V
Surface MountNO
TechnologyTTL
Temperature GradeCOMMERCIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormTHROUGH-HOLE
Terminal Pitch2.54mm
Terminal PositionDUAL
PackageDual-In-Line Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
HTS Code8542.39.00.60

Where can I find the SN74LS125ANE4 datasheet?

SN74LS125ANE4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for SN74LS125ANE4?

Compatible alternatives and drop-in replacements for SN74LS125ANE4:

SN74LS125ANTexas Instruments

Bus Driver, LS Series, 4-Func, 1-Bit, True Output, TTL, PDIP14

View Part →
SN74LS126ANTexas Instruments

Bus Driver, LS Series, 4-Func, 1-Bit, True Output, TTL, PDIP14

View Part →

Frequently Asked Questions

How many buffer channels does the SN74LS125ANE4 provide and how is each one enabled?

The SN74LS125ANE4 contains 4 independent buffer channels, each controlled by a separate active-low output-enable pin. When an enable pin is driven high, that channel's output enters the high-impedance 3-state, allowing safe sharing of a common 5 V bus line without contention between multiple drivers.

What output current can the SN74LS125ANE4 sink, and what is the rated load capacitance?

Each output can sink up to 24 mA of current and is rated for a load capacitance of 45 pF. These parameters make the device capable of reliably driving standard TTL bus lines at 5 V while meeting timing margins for typical LS-family propagation delay specifications.

For which legacy or prototype board designs is the DIP package particularly useful?

The 14-pin PDIP package is especially useful for breadboard prototyping and through-hole PCB designs where surface-mount soldering is not practical. Many legacy industrial controllers and educational development boards specify through-hole 74LS-series ICs operating at 5 V, and the SN74LS125ANE4 fits directly into standard 0.3-inch DIP sockets.

How does the SN74LS125ANE4 compare to the SN74HC125 for modern 5 V designs?

Both are quad 3-state bus buffers in 14-pin packages operating at 5 V, but the 74HC125 draws significantly less supply current due to CMOS technology. The SN74LS125ANE4 uses bipolar TTL logic with a 24 mA sink capability that maintains compatibility with legacy LS-series logic levels, whereas the 74HC125 offers faster switching and lower quiescent current at the cost of slightly different input threshold voltages.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy