SN74HC132N Texas Instruments logic-gates (DIP-14) In Stock
SN74HC132N is a quad 2-input NAND gate with Schmitt-trigger inputs in a 14-pin DIP package, operating at 2–6V supply; priced from $0.90/unit, in-stock and available to order, ships worldwide.
- Manufacturer
- Texas Instruments
- Package
- DIP-14
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- SN74HC132N Datasheet PDF
- Category
- logic-gates
- Price
- From $0.2700(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Quad 2-input NAND gates with Schmitt-trigger inputs for noise immunity
- Wide supply voltage range: 2V to 6V
- 14-pin DIP through-hole package for easy prototyping
- CMOS logic compatible inputs and outputs
- Low power consumption with high-speed HC-series performance
- RoHS compliant and lead-free
Applications
Widely used in digital logic circuits for signal conditioning, debouncing, and oscillator design. Suitable for industrial control, consumer electronics, and embedded system prototyping where robust noise rejection is needed.
Specifications
| supplyVoltage | 2V-6V |
| packageType | PDIP-14 |
| pinCount | 14 |
| tempRange | -40C to 85C |
| logic | NAND Schmitt-Trigger |
| channels | 4 |
| outputType | Push-Pull (Totem-Pole) |
| propagationDelay | 11ns @ 5V |
| Package | DIP-14 |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL MSL1 |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for SN74HC132N:
Frequently Asked Questions
What are the key specifications of the SN74HC132N?
The SN74HC132N operates on a 2V-6V supply, contains four independent 2-input NAND gates with Schmitt-trigger hysteresis, has a propagation delay of ~11ns at 5V, and comes in a 14-pin DIP package. Operating temperature range is -40C to 85C.
What are typical applications for the SN74HC132N?
Common applications include switch debouncing, signal conditioning, noise filtering on slow or noisy digital signals, waveform shaping, and simple RC oscillator circuits. The Schmitt-trigger inputs make it ideal wherever clean digital transitions are required.
What is a compatible substitute for SN74HC132N?
Compatible alternatives include the MM74HC132N (ON Semiconductor), CD74HC132E (Texas Instruments PDIP variant), and 74HC132 from Nexperia or NXP. All share the same pinout and logic function but verify supply voltage and timing parameters before substituting.
Is the SN74HC132N RoHS compliant and lead-free?
Yes, the SN74HC132N is RoHS compliant and lead-free (Pb-free). It carries MSL1 moisture sensitivity rating, meaning no special handling or baking is required prior to SMT assembly.
What package and pin count does the SN74HC132N use?
The SN74HC132N comes in a 14-pin PDIP (plastic dual in-line) through-hole package with 2.54mm pitch, including 4 gate input pairs, 4 gate outputs, one VCC pin, and one GND pin.
Related Guides
DP83848 10/100 Mbps Ethernet PHY Transceiver: How to Choose the Right Variant
A complete selection guide for the DP83848 family: compare temperature grades, packages, JTAG support, and interface options across all five variants.
Jun 2, 2026
LM5156 Wide-VIN Boost/SEPIC/Flyback Controller: How to Choose the Right Variant
A concise selection guide for the LM5156 and LM51561 family: how to choose between automotive vs industrial grade, spread-spectrum vs fixed-frequency, and WSON-8 vs HTSSOP-14 package.
Jun 2, 2026
24LC01B I2C EEPROM Design Guide: Pinout, Write Timing, and Package Selection
Complete application note for the Microchip 24LC01B 1 Kbit I2C EEPROM: address wiring, pull-up sizing, acknowledge polling, page-write alignment, and package selection.
Jun 1, 2026
AD8531ARTZ-REEL7 Application Note: High-Current Op-Amp Design Guide
A complete design guide for the AD8531ARTZ-REEL7 250 mA rail-to-rail op-amp: decoupling, thermal budgeting, capacitive load stability, and PCB layout best practices.
Jun 1, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
LM3881MME/NOPB
Small Outline Packages
Integrated Circuit
CD74HCT112EE4
Dual-In-Line Packages
Integrated Circuit
CD54AC163F3A
Ceramic Dual-In-Line Packages
Integrated Circuit
TLC2552CDGK
Small Outline Packages
Integrated Circuit
5962-9555201NXDR
Small Outline Packages
Integrated Circuit
CD4002BNSRG4
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.9000 | $0.90 |
| 15+ | $0.4050 | $6.08 |
| 124+ | $0.2700 | $33.48 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”