SMDA15CE3 Microchip TVS Diode (Bi-directional) (Small Outline Packages) In Stock
Microchip SMDA15CE3 is a bidirectional TVS diode array in an 8-SO package featuring 4 separate silicon elements with a 16.7 V minimum breakdown voltage and 30 V maximum clamping voltage at 5 A (8/20 µs) peak pulse current. It provides 300 W peak power dissipation for ESD and surge protection on multi-line interfaces. Available from authorized distributors with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- SMDA15CE3 Datasheet PDF
- Category
- TVS Diode (Bi-directional)
- Temp Range
- -55.0°C to 150.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SMDA15CE3?
- 4 separate bidirectional TVS elements in compact 8-SO package protect 4 independent signal lines simultaneously
- 300 W peak power dissipation capability with 30 V clamping voltage at 5 A (8/20 µs) surge pulse
- 16.7 V minimum breakdown voltage suited for protecting 12 V and 15 V bus lines from transient overvoltage events
- Silicon TVS construction provides sub-nanosecond response time for reliable ESD and lightning surge clamping
What is SMDA15CE3 used for?
The SMDA15CE3 is used for ESD and transient overvoltage protection on multi-line interfaces in industrial communication buses, automotive sensor lines, and RS-485 or RS-422 transceivers operating at 12 V to 15 V supply rails. Its 4-element array configuration allows a single 8-SO package to protect 4 bidirectional signal lines against 300 W surge transients. Power supply input filtering, I/O port protection, and industrial fieldbus protection are typical end applications.
What are the specifications of SMDA15CE3?
| YTEOL | 6.38 |
| Breakdown Voltage-Min | 16.7V |
| Breakdown Voltage-Nom | 16.7V |
| Clamping Voltage-Max | 30V |
| Configuration | SEPARATE, 4 ELEMENTS |
| Diode Element Material | SILICON |
| Diode Type | TRANS VOLTAGE SUPPRESSOR DIODE |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Non-rep Peak Rev Power Dis-Max | 300W |
| Number of Elements | 4 |
| Package Body Material | PLASTIC/EPOXY |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Polarity | BIDIRECTIONAL |
| Qualification Status | Not Qualified |
| Rep Pk Reverse Voltage-Max | 15V |
| Surface Mount | YES |
| Technology | AVALANCHE |
| Terminal Finish | MATTE TIN |
| Terminal Form | GULL WING |
| Terminal Position | DUAL |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8541.10.00.50 |
| Country of Origin | Philippines |
Where can I find the SMDA15CE3 datasheet?
SMDA15CE3 Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for SMDA15CE3?
Compatible alternatives and drop-in replacements for SMDA15CE3:
Voltage Suppressor Diode, 300W, 15V V(RWM), Bidirectional, 4 Element, Silicon
Frequently Asked Questions
What is the clamping voltage and peak pulse current rating of the SMDA15CE3 TVS array?
The SMDA15CE3 clamps transient overvoltages to a maximum of 30 V while conducting up to 5 A peak pulse current under an 8/20 µs waveform, with 300 W peak power dissipation. The 16.7 V minimum breakdown voltage ensures the device remains in standby mode during normal 12 V or 15 V bus operation, triggering only during overvoltage transients.
How many signal lines does one SMDA15CE3 protect and in which interface standards is it commonly deployed?
A single SMDA15CE3 protects 4 separate bidirectional signal lines from one 8-SO package, making it ideal for RS-485, RS-422, CAN bus, and industrial 4-wire sensor interfaces where each line requires independent bidirectional TVS clamping. Protecting 4 lines with one component instead of 4 discrete TVS diodes reduces BOM count and PCB area by approximately 60%.
For automotive sensor protection circuits operating at 12 V, how does SMDA15CE3 compare to a discrete TVS diode solution?
For a 12 V automotive sensor bus, the SMDA15CE3's 16.7 V breakdown and 30 V clamping voltage leave adequate margin above the 12 V nominal rail while clamping load dump or ESD transients well below the 40 V stress limit of typical 12 V rail components. Using the SMDA15CE3 array replaces 4 discrete TVS diodes with 1 package, saving approximately 3 mm × 2 mm of board space per protected signal pair in underhood ECU designs.
Is SMDA15CE3 compliant with RoHS requirements, and what does the E3 suffix indicate?
Yes, the E3 suffix in SMDA15CE3 denotes JESD-609 Code e3 RoHS compliance, confirming the device is manufactured with lead-free, halogen-free materials meeting current environmental directives. This makes it suitable for automotive, industrial, and consumer electronics designs that must comply with EU RoHS 2 directive requirements across the full production lifecycle.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
SMAJ100CA
LITTELFUSE
TVS Diode (Bi-directional)
SMDJ28CA
LITTELFUSE
TVS Diode (Bi-directional)
SMCJ30CA
LITTELFUSE
TVS Diode (Bi-directional)
SRDA3.3-4BTG
LITTELFUSE
TVS Diode (Bi-directional)
VS5V0BB1EST15R
ROHM Semiconductor
TVS Diode (Bi-directional)
SP1002-01JTG
LITTELFUSE
TVS Diode (Bi-directional)
ESD5481MUT3G
ON Semiconductor
TVS Diode (Bi-directional)
SMDJ24CA-T7
LITTELFUSE
TVS Diode (Bi-directional)
5.0SMDJ48CA
LITTELFUSE
TVS Diode (Bi-directional)
PGB2010402KRHF
LITTELFUSE
TVS Diode (Bi-directional)
SMAJ15CA
LITTELFUSE
TVS Diode (Bi-directional)
SMAJ51CA
LITTELFUSE
TVS Diode (Bi-directional)
SMAJ30CA
LITTELFUSE
TVS Diode (Bi-directional)
PGB1010603NRHF
LITTELFUSE
TVS Diode (Bi-directional)
CDSOD323-T05LC
Bourns
TVS Diode (Bi-directional)
RCLAMP0582N.TCT
SEMTECH
TVS Diode (Bi-directional)
SMBJ250CA
LITTELFUSE
TVS Diode (Bi-directional)
UCLAMP0511T.TCT
SEMTECH
TVS Diode (Bi-directional)
VCUT03E1-SD0-G4-08
Vishay
TVS Diode (Bi-directional)
VBUS05L1-DD1-G-08
Vishay
TVS Diode (Bi-directional)
VCUT0714A-HD1-GS08
Vishay
TVS Diode (Bi-directional)
SMAJ45CA
LITTELFUSE
TVS Diode (Bi-directional)
CDSOT23-0502B
Bourns
TVS Diode (Bi-directional)
VS5V0BA1FST40NB
ROHM Semiconductor
TVS Diode (Bi-directional)