SKQGAFE010 ALPS Switch (Other) In Stock
ALPS SKQGAFE010 is a surface-mount SPST-NO tactile switch with a 1.5 mm actuator stem and 0.98 N operating force, rated at 50 mA for compact SMT PCB designs. It delivers a crisp tactile click response in a small footprint suitable for consumer electronics, wearables, and handheld devices. Available from stock with worldwide shipping.
- Manufacturer
- ALPS
- Package
- Other
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- SKQGAFE010 Datasheet PDF
- Category
- Switch
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- SPST-NO tactile switch with 0.98 N operating force and 1.5 mm stem height for precise user feedback
- 50 mA rated switching capacity in a compact SMT package for low-power consumer electronics applications
- Surface-mount design with stem actuator enabling compatibility with keycaps and overlay panels in HMI assemblies
- ALPS SKQGA series quality providing consistent tactile feel and long mechanical service life across millions of actuations
Applications
The SKQGAFE010 is used in user interface controls for portable electronics, wearable devices, and handheld instruments where a compact SMT tactile switch with a 1.5 mm stem and 0.98 N actuation force is needed for a satisfying click response. Its 50 mA rating makes it suitable for microcontroller GPIO reset buttons, mode-select switches, and menu navigation controls in consumer gadgets. The surface-mount stem design also accommodates custom keycap overlays in remote controls, medical handhelds, and industrial HMI panels requiring reliable tactile feedback across daily use cycles.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What are the key electrical and mechanical ratings of the ALPS SKQGAFE010 tactile switch?
The SKQGAFE010 is rated for 50 mA switching current with a 0.98 N operating force and a 1.5 mm actuator stem travel. It is a normally open (SPST-NO) configuration in a surface-mount package, making it suitable for low-power microcontroller input circuits, reset buttons, and user-interface controls where a defined tactile click at sub-1 N force is required.
For which handheld or wearable device designs is the SKQGAFE010 a well-suited tactile switch choice?
The SKQGAFE010 is an excellent fit for wearable fitness trackers, portable medical devices, handheld remote controls, and compact IoT gadgets where the SMT form factor and 1.5 mm stem height allow a thin device profile. Its 0.98 N actuation force provides a light but distinct tactile response appropriate for devices that users interact with frequently, such as smartwatch side buttons or hearing aid controls operating at currents well below the 50 mA maximum.
How does the 1.5 mm stem on the SKQGAFE010 affect panel and keycap integration in HMI designs?
The 1.5 mm stem of the SKQGAFE010 protrudes above the switch body, allowing a custom keycap, rubber boot, or overlay panel membrane to be mounted over the actuator for a finished product appearance. Designers can specify keycap travel depth and legend printing to match the 1.5 mm stem height, enabling professional-grade tactile controls in industrial HMI panels, remote controls, and medical device front panels with IP-rated sealing membranes.
How many actuations is the ALPS SKQGAFE010 rated for, and how does this affect product lifespan planning?
ALPS SKQGA series tactile switches are typically rated for 100,000 to 300,000 actuations of mechanical life, depending on operating conditions. For a device used 50 times per day, a 100,000-cycle rating translates to approximately 5 years of daily use before the 0.98 N operating force may drift outside specification, which is sufficient for most consumer electronics products with a 2- to 3-year design life.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About ALPS
ALPS is a leading electronic component manufacturer. FindMyChip sources ALPS ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”