SI8631EC-B-IS1 Silicon Labs Integrated Circuit (Small Outline Packages) In Stock

Silicon Labs SI8631EC-B-IS1 is a 3-channel digital isolator rated at 3.75 kV RMS isolation with 2 forward and 1 reverse channels in a small-outline SOIC package. It operates at data rates up to 150 Mbps and supports 2.5 V to 5.5 V supply voltage. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
SI8631EC-B-IS1Small Outline Packages
Quick Facts
Manufacturer
Silicon Labs
Package
Small Outline Packages
Pin Count
16
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $1.5100(MOQ 1)
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of SI8631EC-B-IS1?

  • 3.75 kV RMS galvanic isolation with 2 forward and 1 reverse channels enabling bidirectional communication across isolated power domains
  • Up to 150 Mbps data rate per channel supporting high-speed SPI, CAN, and RS-485 interface isolation in industrial systems
  • 2.5 V to 5.5 V wide supply voltage range enabling direct interfacing between 3.3 V microcontrollers and 5 V industrial logic without level translators

What is SI8631EC-B-IS1 used for?

The SI8631EC-B-IS1 is designed for galvanic isolation of SPI, UART, and general-purpose digital interfaces in industrial automation, motor drive controllers, and grid-tied inverters where high-voltage transients must be blocked from control-side electronics. Its 3.75 kV RMS isolation rating meets IEC 60747-17 safety requirements for reinforced insulation in medical and industrial equipment. The bidirectional channel topology with 2 forward and 1 reverse paths suits MISO/MOSI/CLK SPI bus isolation in a single-chip solution.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Where can I find the SI8631EC-B-IS1 datasheet?

SI8631EC-B-IS1 Datasheet Download

Official datasheet from Silicon Labs

What are equivalent replacements for SI8631EC-B-IS1?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What isolation voltage does the SI8631EC-B-IS1 provide and which safety standards does it meet?

The SI8631EC-B-IS1 is rated at 3.75 kV RMS continuous working isolation, meeting IEC 60747-17 and UL 1577 requirements for basic or reinforced insulation in industrial and medical applications. This isolation level protects microcontrollers and DSPs from high-voltage transients of 5 kV or more that may appear on motor drive power buses during switching events.

How does the 2-forward-1-reverse channel configuration of the SI8631EC-B-IS1 map to common serial interfaces?

The 2 forward and 1 reverse channel layout directly maps to a 3-wire SPI bus: 2 forward channels carry SPI clock and MOSI signals from master to slave, and 1 reverse channel carries MISO data back to the master. This lets a single SI8631EC-B-IS1 isolate an entire SPI link at up to 150 Mbps without requiring a second isolator device for the return path.

What supply voltage range does the SI8631EC-B-IS1 support and how does this simplify mixed-voltage designs?

The SI8631EC-B-IS1 accepts 2.5 V to 5.5 V on both the input-side and output-side supply pins independently. This allows direct connection between a 3.3 V microcontroller on the primary side and a 5 V industrial fieldbus transceiver on the secondary side without external voltage translators, reducing the component count by 2 to 4 discrete level-shifter ICs in a typical design.

At what maximum data rate does the SI8631EC-B-IS1 operate and what propagation delay should designers plan for?

The SI8631EC-B-IS1 supports up to 150 Mbps per channel with a typical propagation delay of approximately 10 ns, which is far below the timing margins of SPI at 10 MHz or CAN at 1 Mbps. This low latency allows the isolator to be inserted into existing interface timing budgets without reclocking or extending SPI transaction windows, even in designs with tight 50 ns cycle constraints.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Silicon Labs

Silicon Labs is a leading electronic component manufacturer. FindMyChip sources Silicon Labs ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $1.5100
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$4.3100$4.31
3+$3.8100$11.43
10+$3.4200$34.20
19+$1.9100$36.29
288+$1.8420$530.50
500+$1.5100$755.00
pcs
Unit price: $4.3100 · Total: $4.31

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy