SHF-105-01-L-D-RA-TR SAMTEC Connector (Other) In Stock
SHF-105-01-L-D-RA-TR is a SAMTEC 10-position dual-row right-angle male board connector on a 1.27mm (0.050") pitch, with tin-over-nickel contact finish and tape-and-reel packaging for automated SMT placement. RoHS compliant and suited for space-constrained board-to-board signal connections. From $2.50, in stock, worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- SHF-105-01-L-D-RA-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 10-position dual-row right-angle male SMT connector on compact 1.27mm (0.050 inch) pitch
- Tin-over-nickel contact finish provides reliable low-resistance mating for high-cycle board-to-board connections
- Right-angle (RA) configuration routes signals parallel to the PCB surface, reducing connector height profile
- Tape-and-reel (TR) packaging supports automated pick-and-place assembly in high-volume SMT production lines
Applications
The SHF-105-01-L-D-RA-TR is used in compact board-to-board and board-to-cable signal interconnect applications in embedded computing modules, test equipment, and consumer electronics where a low-profile right-angle connector with 1.27mm pitch is required. Its dual-row 10-pin configuration suits SPI, I2C, JTAG, and other multi-signal interfaces that need a small footprint on densely populated PCBs. Tape-and-reel packaging makes it cost-effective for high-volume production.
Specifications
| Factory Lead Time | 3 Weeks, 1 Day |
| YTEOL | 9.15 |
| Connector Type | BOARD CONNECTOR |
| Contact Finish Mating | TIN OVER NICKEL |
| Contact Finish Termination | Tin (Sn) - with Nickel (Ni) barrier |
| Contact Gender | MALE |
| Contact Material | NOT SPECIFIED |
| DIN Conformance | NO |
| Filter Feature | NO |
| IEC Conformance | NO |
| JESD-609 Code | e3 |
| MIL Conformance | NO |
| Mating Information | MULTIPLE MATING PARTS AVAILABLE |
| Mixed Contacts | NO |
| Mounting Style | RIGHT ANGLE |
| Mounting Type | BOARD |
| Number Of Connectors | ONE |
| Number of Rows Loaded | 2 |
| Option | GENERAL PURPOSE |
| Terminal Pitch | 1.27mm |
| Termination Type | SOLDER |
| Total Number of Contacts | 10 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8536.69.40.40 |
| Country of Origin | Malaysia, USA |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pin pitch and row configuration does SHF-105-01-L-D-RA-TR use and why does that matter for PCB density?
The SHF-105-01-L-D-RA-TR uses a 1.27mm (0.050 inch) pitch in a dual-row 10-position right-angle layout, offering 10 signal contacts in roughly half the PCB footprint of a standard 2.54mm pitch connector. This compact pitch is essential for high-density PCBs in portable instruments, SBCs, and embedded modules where board area is limited.
How does the right-angle mounting of SHF-105-01-L-D-RA-TR benefit height-constrained enclosure designs?
The right-angle (RA) orientation of the SHF-105-01-L-D-RA-TR allows the mating connector to plug in parallel to the PCB surface rather than perpendicular to it, reducing the connector stack height above the board to under 5mm. This is critical in slim enclosures or stacked PCB assemblies where vertical clearance is limited to less than 10mm.
Which interfaces does SHF-105-01-L-D-RA-TR typically support and how many circuits does each lane consume?
The 10-position SHF-105-01-L-D-RA-TR can accommodate a 4-wire SPI bus using 4 contacts, leaving 6 contacts for power, ground, and GPIO signals. Alternatively, it supports dual UART channels at 2 wires each plus auxiliary signals, or a full JTAG debug port requiring 5 contacts, making it versatile for debug, programming, and sensor interfaces on embedded platforms.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”