SFM-123-02-FM-D-A-K SAMTEC Connector (Other) In Stock
Samtec SFM-123-02-FM-D-A-K is a 46-position dual-row high-reliability SMT socket strip with 0.050" (1.27 mm) pitch and flush-mount (FM) body for low-profile board-to-board interconnects. Designed for high-density embedded and telecom modules requiring compact, reliable mating. Available from authorized distributors with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 46
- Lifecycle
- ACTIVE
- Datasheet
- SFM-123-02-FM-D-A-K Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-123-02-FM-D-A-K?
- 46-position dual-row configuration at 0.050" (1.27 mm) pitch enabling very high signal density in compact SMT footprints
- Flush-mount (FM) body option providing a lower profile above the PCB surface for height-constrained board-to-board stack designs
- High-reliability construction rated for industrial operating temperatures from -55°C to +125°C
- K (key) polarization option preventing incorrect connector orientation and accidental mis-mating in dense multi-connector assemblies
What is SFM-123-02-FM-D-A-K used for?
The SFM-123-02-FM-D-A-K targets high-density board-to-board signal interconnects in FPGA module carriers, embedded SoM designs, and high-pin-count telecom interface boards requiring 46 positions at 0.050" pitch with a flush-mounted low-profile body. The flush-mount and polarizing key (K) options reduce mating errors and enable tighter component clearances in height-constrained enclosures. It is well-suited for production environments where repeatable, reliable assembly of dense connector arrays is required.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-123-02-FM-D-A-K datasheet?
SFM-123-02-FM-D-A-K Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-123-02-FM-D-A-K?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What does the flush-mount (FM) body option on the SFM-123-02-FM-D-A-K mean for board-to-board stack height?
The FM (flush-mount) designation means the connector body sits lower on the PCB surface than a standard-height SFM variant, reducing the above-board profile by approximately 0.5 mm to 1.0 mm at the 0.050" (1.27 mm) pitch. This enables tighter board-to-board separation in compact embedded stack assemblies, such as SOM carrier boards and dense FPGA daughtercards, where overall system height must stay within a 10 mm envelope.
How many signals can the SFM-123-02-FM-D-A-K route, and how does the 0.050" pitch impact trace routing versus a 0.100" pitch connector?
The SFM-123-02-FM-D-A-K routes 46 signals across 2 rows at 0.050" (1.27 mm) pitch, occupying approximately 30 mm of board length (23 positions per row). By contrast, a comparable 46-position connector at 0.100" (2.54 mm) pitch would span 60 mm. The 0.050" pitch halves the connector footprint, freeing 30 mm of board edge for additional components or routing channels in space-constrained embedded designs.
In which high-reliability applications is the SFM-123-02-FM-D-A-K specifically designed to perform over thousands of mating cycles?
SAMTEC SFM-series high-reliability socket strips are rated for operating temperatures from -55°C to +125°C and designed for applications requiring hundreds to thousands of mating cycles. SFM-123-02-FM-D-A-K is therefore well-matched to automated test equipment (ATE) bed-of-nails fixtures, hot-swap module carriers, and field-replaceable unit (FRU) boards in telecom racks where the 46-position connector must retain contact resistance below 20 mΩ after repeated insertion cycles.
When should an engineer specify the K (key) option on SFM-123-02-FM-D-A-K rather than the standard non-polarized version?
The K polarization key should be specified when the PCB design includes multiple SFM connectors with the same 46-position dual-row 0.050" pitch footprint in close proximity, creating a risk of swapped mating. The physical key makes the SFM-123-02-FM-D-A-K and its mating header directionally unique, eliminating reverse-insertion damage and saving debug time during manufacturing and field maintenance of FPGA boards, embedded computing modules, and telecom line cards.
Related Guides
STM32H753VIT6 High-Performance MCU Design Guide
Practical STM32H753VIT6 design guidance for power, clocks, memory, DMA, PCB layout, bring-up, and production recovery.
Aug 3, 2026
STM32H753ZIT6 Selection Guide for High-Performance Embedded Systems
Select the STM32H753ZIT6 by evaluating compute, memory, LQFP144 pinout, power, interfaces, security, and sourcing requirements.
Aug 3, 2026
ICL7660ACPAZ Negative Voltage Charge Pump Design Guide
Design a reliable ICL7660ACPAZ negative rail with capacitor equations, layout rules, startup checks, and practical troubleshooting.
Aug 2, 2026
C0402C103K3RACTU 10 nF MLCC Design Guide
Practical guidance for applying the C0402C103K3RACTU 10 nF, 25 V X7R MLCC in decoupling, filtering, timing, and EMI-control networks.
Aug 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector