SFM-122-T2-FM-D-A-P-TR SAMTEC Connector (Other) In Stock
The SFM-122-T2-FM-D-A-P-TR is a 44-position dual-row high-reliability surface-mount socket strip from Samtec with 0.050 inch pitch, gold-plated contacts, shrouded housing, and tape-and-reel packaging. It provides dense keyed mezzanine interconnect with automated assembly support. Available in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 44
- Lifecycle
- ACTIVE
- Datasheet
- SFM-122-T2-FM-D-A-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-122-T2-FM-D-A-P-TR?
- 44-position dual-row configuration at 0.050 inch (1.27 mm) pitch enabling high-density signal interconnect in compact PCB designs
- Gold-plated (A) contacts with female-mount (FM) tail for low contact resistance below 20 milliohms and extended mating cycle life
- Polarized shroud (P) housing prevents mis-mating and protects 44 contacts during repeated field-service insertions
- Tape-and-reel (TR) packaging for seamless integration into high-volume automated pick-and-place SMT assembly lines
What is SFM-122-T2-FM-D-A-P-TR used for?
The SFM-122-T2-FM-D-A-P-TR is designed for high-density mezzanine and board-to-board interconnect in FPGA daughter cards, communications line modules, and test-and-measurement platforms requiring 44 signal connections at 0.050 inch pitch. Its gold-plated contacts ensure stable contact resistance in high-cycle applications such as hot-swap and field-replaceable modules. The shrouded polarized housing adds keying protection in dense PCB layouts where mis-mating would damage fine-pitch contacts.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-122-T2-FM-D-A-P-TR datasheet?
SFM-122-T2-FM-D-A-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-122-T2-FM-D-A-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the position count and pitch of the SFM-122-T2-FM-D-A-P-TR, and how does that affect PCB layout?
The SFM-122-T2-FM-D-A-P-TR offers 44 positions in a dual-row layout at 0.050 inch (1.27 mm) pitch, which reduces connector length by roughly 50% compared to the same 44-position count at 0.100 inch pitch, freeing PCB area for routing and decoupling capacitors in compact high-speed designs.
How does the shrouded P housing on the SFM-122-T2-FM-D-A-P-TR protect the connector in a production environment?
The P shroud encloses all 44 fine-pitch contacts behind a plastic wall with a polarization key, preventing mis-mating during automated board assembly and manual handling, which is critical at 0.050 inch pitch where a single-row offset would short-circuit adjacent signal contacts.
Which high-speed data applications benefit from the gold-plated contacts of the SFM-122-T2-FM-D-A-P-TR?
FPGA mezzanine boards, PCIe add-in card adapters, and test-and-measurement modules operating serial lanes at data rates above 1 Gbps benefit from the gold-plated (A) contacts, which maintain contact resistance below 20 milliohms across 500 or more mating cycles to preserve signal integrity at 50 ohm or 100 ohm controlled-impedance routing.
Can the SFM-122-T2-FM-D-A-P-TR be processed through a standard no-clean reflow profile?
Yes, the surface-mount SFM-122-T2-FM-D-A-P-TR is rated for standard lead-free reflow soldering with a peak temperature up to 260 degrees C, and the tape-and-reel (TR) packaging is compatible with 8 mm or 12 mm feeder widths on pick-and-place machines for high-volume production runs.
Related Guides
STM32H753VIT6 High-Performance MCU Design Guide
Practical STM32H753VIT6 design guidance for power, clocks, memory, DMA, PCB layout, bring-up, and production recovery.
Aug 3, 2026
STM32H753ZIT6 Selection Guide for High-Performance Embedded Systems
Select the STM32H753ZIT6 by evaluating compute, memory, LQFP144 pinout, power, interfaces, security, and sourcing requirements.
Aug 3, 2026
ICL7660ACPAZ Negative Voltage Charge Pump Design Guide
Design a reliable ICL7660ACPAZ negative rail with capacitor equations, layout rules, startup checks, and practical troubleshooting.
Aug 2, 2026
C0402C103K3RACTU 10 nF MLCC Design Guide
Practical guidance for applying the C0402C103K3RACTU 10 nF, 25 V X7R MLCC in decoupling, filtering, timing, and EMI-control networks.
Aug 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector