SFM-117-T2-L-D SAMTEC Connector (Other) In Stock
SAMTEC SFM-117-T2-L-D is a 34-position dual-row high-reliability SMT socket strip with 0.050" (1.27 mm) pitch and low-profile vertical termination, designed for high-density mezzanine and daughter-board interconnect applications. Gold-plated contacts ensure consistent low-resistance mating across thousands of cycles. From $9.00 in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 34
- Lifecycle
- ACTIVE
- Datasheet
- SFM-117-T2-L-D Datasheet PDF
- Category
- Connector
- Price
- From $1.9700(MOQ 1000)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-117-T2-L-D?
- 34-position dual-row SMT socket strip with 0.050" (1.27 mm) pitch enables ultra-high-density board-to-board connections with 17 positions per row in a compact SMT footprint
- High-reliability gold-plated contacts with low insertion force design rated for thousands of mate/demate cycles, ensuring long-term signal integrity in modular embedded systems
- Low-profile (L) surface mount termination style reduces stacked board height compared to elevated socket alternatives, critical for slim form-factor embedded and wearable designs
- Dual-row configuration routes 34 signals in approximately half the PCB edge length of a 0.100" pitch equivalent, freeing board space for additional components
What is SFM-117-T2-L-D used for?
The SFM-117-T2-L-D is used for high-density board stacking in FMC (FPGA Mezzanine Card), SOM (System-on-Module), and high-speed daughter-card interconnect applications requiring 34-signal connectivity at 0.050" pitch. Its low-profile SMT design suits slim embedded computers, compact RF modules, and high-speed camera interface boards where minimizing stacked board height below 10 mm is a design constraint. The dual-row socket configuration also supports differential pair routing for high-speed serial signals at 1 Gbps and above in communications and data acquisition systems.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-117-T2-L-D datasheet?
SFM-117-T2-L-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-117-T2-L-D?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What pitch and position count does SFM-117-T2-L-D offer for mezzanine board stacking?
The SFM-117-T2-L-D provides 34 total positions in a dual-row layout at 0.050" (1.27 mm) pitch, with 17 positions per row. This configuration enables 34-signal board-to-board stacking in a footprint roughly 22 mm long, compared to 44 mm for an equivalent 0.100" pitch dual-row socket.
How does the low-profile (L) termination style of SFM-117-T2-L-D benefit slim embedded system designs?
The low-profile (L) termination style of SFM-117-T2-L-D minimizes the mated stack height between two PCBs, enabling board-to-board clearances below 5 mm in compact embedded modules, wearable electronics, and slim industrial controllers where a standard-height 0.050" pitch socket would exceed mechanical clearance limits.
Can SFM-117-T2-L-D support high-speed differential signal pairs at 1 Gbps or above?
Yes, the SFM-117-T2-L-D dual-row 0.050" pitch layout supports differential pair routing for high-speed serial signals at 1 Gbps and above, such as LVDS, MIPI, or SGMII. The tight 1.27 mm pitch controls impedance more consistently than 2.54 mm pitch connectors, reducing cross-talk and signal integrity degradation at high data rates.
What makes SFM-117-T2-L-D a high-reliability choice for industrial and test-and-measurement applications?
SAMTEC SFM series connectors use gold-plated contacts rated for thousands of mate/demate cycles with contact resistance typically below 20 mΩ and operating temperatures from -55°C to +125°C. For industrial test fixtures and modular instruments requiring frequent PCB swaps, this durability far exceeds standard SMT headers rated for 25–100 insertion cycles.
Related Guides
STM32H753VIT6 High-Performance MCU Design Guide
Practical STM32H753VIT6 design guidance for power, clocks, memory, DMA, PCB layout, bring-up, and production recovery.
Aug 3, 2026
STM32H753ZIT6 Selection Guide for High-Performance Embedded Systems
Select the STM32H753ZIT6 by evaluating compute, memory, LQFP144 pinout, power, interfaces, security, and sourcing requirements.
Aug 3, 2026
ICL7660ACPAZ Negative Voltage Charge Pump Design Guide
Design a reliable ICL7660ACPAZ negative rail with capacitor equations, layout rules, startup checks, and practical troubleshooting.
Aug 2, 2026
C0402C103K3RACTU 10 nF MLCC Design Guide
Practical guidance for applying the C0402C103K3RACTU 10 nF, 25 V X7R MLCC in decoupling, filtering, timing, and EMI-control networks.
Aug 2, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1000+ | $2.4700 | $2470.00 |
| 2500+ | $2.2300 | $5575.00 |
| 5000+ | $1.9700 | $9850.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector