SFM-116-02-H-D SAMTEC Connector (Other) In Stock
SAMTEC SFM-116-02-H-D is a 32-position dual-row high-reliability SMT socket strip with 0.050" (1.27 mm) pitch, designed for precision board-to-board and mezzanine interconnect applications. Gold-plated contacts and tight tolerance housing ensure consistent mating performance across thousands of cycles. From $8.00 in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 32
- Lifecycle
- ACTIVE
- Datasheet
- SFM-116-02-H-D Datasheet PDF
- Category
- Connector
- Price
- From $5.0281(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-116-02-H-D?
- 32-position dual-row SMT socket strip with 0.050" (1.27 mm) pitch enables high-density board-to-board interconnects in compact embedded systems
- High-reliability construction with gold-plated contacts provides low contact resistance below 20 mΩ and supports thousands of mating cycles without performance degradation
- Surface mount footprint eliminates through-hole drilling, simplifying PCB fabrication and reducing board layer count in multilayer mezzanine designs
- Dual-row 0.050" pitch layout routes 32 signals in a footprint half the PCB length of equivalent 0.100" pitch single-row connectors, saving critical board space
What is SFM-116-02-H-D used for?
The SFM-116-02-H-D is used in high-density mezzanine and daughter-board interconnect applications for FPGA development platforms, embedded SBCs, and RF module stacking where 32 signals must be routed in a compact 0.050" pitch SMT footprint. Its high-reliability socket design is suited for industrial instruments, medical test equipment, and defense electronics requiring consistent mating performance across temperature ranges from -55°C to +125°C. Contract manufacturers building modular computing or communications hardware use this connector to achieve repeatable board stacking with precision alignment.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-116-02-H-D datasheet?
SFM-116-02-H-D Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-116-02-H-D?
Compatible alternatives and drop-in replacements for SFM-116-02-H-D:
Board Connector, 32 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket
Frequently Asked Questions
What pitch and position count does the SFM-116-02-H-D provide for board-to-board stacking?
The SFM-116-02-H-D provides 32 positions arranged in a dual-row configuration at 0.050" (1.27 mm) pitch, delivering 16 positions per row. This high-density layout fits approximately half the PCB footprint of a 0.100" pitch equivalent, enabling compact mezzanine board stacking in space-constrained embedded systems.
How does the high-reliability design of SFM-116-02-H-D benefit industrial and defense applications?
SAMTEC's SFM series high-reliability construction uses gold-plated contacts rated for thousands of mating cycles, with contact resistance typically below 20 mΩ. This performance stability across operating temperatures from -55°C to +125°C makes SFM-116-02-H-D suitable for mil-spec equipment, medical instrumentation, and industrial controllers with long service intervals.
Can SFM-116-02-H-D be assembled using standard SMT reflow processes?
Yes, the SFM-116-02-H-D is designed for surface mount assembly compatible with standard lead-free reflow soldering at peak temperatures up to 260°C per IPC/JEDEC J-STD-020. Its SMT footprint integrates into automated pick-and-place lines, allowing consistent placement on dense PCBs without manual through-hole insertion steps.
When should a board designer choose SFM-116-02-H-D at 0.050" pitch over a 0.100" pitch alternative?
SFM-116-02-H-D at 0.050" (1.27 mm) pitch is preferred when PCB real estate is limited and 32 signals must be routed through a connector occupying roughly 20 mm of board edge versus 40 mm for a 0.100" pitch dual-row equivalent. This pitch also improves ground-plane continuity between stacked boards, reducing crosstalk at high-speed differential signal rates above 1 Gbps.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $15.0400 | $15.04 |
| 50+ | $13.0900 | $654.50 |
| 100+ | $10.0900 | $1009.00 |
| 250+ | $8.6432 | $2160.80 |
| 500+ | $6.8736 | $3436.81 |
| 1000+ | $5.0281 | $5028.05 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector