SFM-114-T2-S-D-LC-TR SAMTEC Connector (Other) In Stock
SFM-114-T2-S-D-LC-TR is a 28-position dual-row high-reliability socket strip from SAMTEC with 1.27 mm (0.050 inch) pitch, through-mount single-ended termination, low-clearance design, and tape-and-reel packaging for compact module interfaces.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- SFM-114-T2-S-D-LC-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-114-T2-S-D-LC-TR?
- 28 positions in a dual-row 1.27 mm (0.050 inch) pitch layout offering high-reliability socket interconnect for compact 28-pin bus interfaces on embedded PCBs
- Through-mount (T2) solder tail contacts providing superior mechanical retention against pull-out forces exceeding those achievable with surface-mount pads
- Low-clearance (LC) contact design minimises board-to-board stacking height, enabling tight inter-board gaps in slim module and SOM carrier applications
- Tape-and-reel (TR) packaging supporting automated pick-and-place assembly during high-volume SMT production runs
What is SFM-114-T2-S-D-LC-TR used for?
SFM-114-T2-S-D-LC-TR is used in small-form-factor module sockets, sensor interface boards, and compact embedded controller daughter cards where a 28-pin interface at 1.27 mm pitch provides sufficient I/O in a minimal footprint. Its through-mount construction is preferred in portable industrial instruments and ruggedised handheld devices subject to mechanical shock and vibration. The tape-and-reel format also makes it well-suited for automated assembly lines producing high volumes of IoT edge nodes and wireless communication modules.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-114-T2-S-D-LC-TR datasheet?
SFM-114-T2-S-D-LC-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-114-T2-S-D-LC-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What contact count and pitch does SFM-114-T2-S-D-LC-TR provide for small module socket applications?
SFM-114-T2-S-D-LC-TR offers 28 total contacts arranged as 14 per row in a dual-row 1.27 mm (0.050 inch) pitch layout, making it a compact choice for 28-pin SPI, JTAG, or parallel bus interfaces on embedded computing and sensor boards.
Why is through-mount (T2) termination preferred over surface-mount in ruggedised applications for SFM-114-T2-S-D-LC-TR?
Through-mount T2 contacts are soldered into plated-through holes, providing mechanical retention strength significantly higher than surface-mount pads — important for portable industrial instruments and military field equipment where shock loads above 50 g or continuous vibration could otherwise lift SMT joints off the PCB.
How does the low-clearance (LC) feature of SFM-114-T2-S-D-LC-TR benefit thin embedded module designs?
The LC designation limits the connector's above-board profile to under 3 mm, allowing board-to-board stacking heights of 5 mm or below when combined with a mating 1.27 mm pitch header pin strip — necessary for compact system-on-module carrier cards and IoT gateway devices with strict height budgets.
What production packaging does SFM-114-T2-S-D-LC-TR use and how does it support high-volume manufacturing?
SFM-114-T2-S-D-LC-TR ships in tape-and-reel (TR) format conforming to EIA-481 carrier tape standards, allowing pick-and-place machines to handle each 28-position socket automatically during reflow soldering at up to 260 °C without operator intervention, improving throughput in high-volume production.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector