SFM-105-T2-STL-D-A-P SAMTEC Connector (Other) In Stock
SAMTEC SFM-105-T2-STL-D-A-P is a 10-position, dual-row, 0.050-inch pitch high-reliability surface mount socket strip designed for compact mezzanine board interconnects. Features gold-plated contacts rated at 1A per pin with a low-profile T2 mating height. From $1.50 in stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- SFM-105-T2-STL-D-A-P Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-105-T2-STL-D-A-P?
- 10-position dual-row SMT socket strip at 0.050-inch (1.27 mm) pitch with T2 low-profile mating height for compact mezzanine and daughter-board assemblies
- Gold-plated contacts rated at 1A per pin delivering consistent low contact resistance across high mating cycle counts in demanding environments
- STL (pick-and-place) pads included enabling automated SMT assembly without tape-and-reel packaging for prototype and low-volume production
What is SFM-105-T2-STL-D-A-P used for?
The SFM-105-T2-STL-D-A-P is ideal for compact daughter-board and mezzanine module interconnects in industrial embedded computers, portable instrumentation, and modular sensor platforms requiring only 10 signal positions at 0.050-inch pitch. Its T2 low-profile mating height minimizes the overall stacking height in slim enclosures. The STL pick-and-place pad variant supports automated SMT placement even in lower-volume production runs without requiring tape-and-reel packaging.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-105-T2-STL-D-A-P datasheet?
SFM-105-T2-STL-D-A-P Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-105-T2-STL-D-A-P?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What position count, pitch, and mating height does the SFM-105-T2-STL-D-A-P provide?
The SFM-105-T2-STL-D-A-P is a 10-position dual-row socket strip with 0.050-inch (1.27 mm) pitch and T2 mating height (approximately 4 mm board-to-board separation), making it a low-profile choice for compact mezzanine interconnects carrying up to 1A per pin.
When does the SFM-105-T2-STL-D-A-P offer an advantage over tape-and-reel variants for prototyping?
The STL suffix adds pick-and-place solder pads to the connector body so automated SMT placement equipment can handle the part without tape-and-reel packaging; this makes the SFM-105-T2-STL-D-A-P practical for low-volume prototype runs where ordering tape-and-reel quantities of 10-pin connectors is not cost-effective.
Which compact embedded system applications suit the 10-position, 0.050-inch pitch SFM-105-T2-STL-D-A-P?
This 10-position, 0.050-inch pitch SMT socket is well matched for portable data loggers, modular IoT sensor boards, and compact embedded controllers where only 10 signals need to cross a board-to-board interface within a footprint of less than 7 mm x 3 mm at 1A per pin.
How does gold plating on the SFM-105-T2-STL-D-A-P contacts improve long-term reliability compared to tin-plated contacts?
Gold-plated contacts on the SFM-105-T2-STL-D-A-P maintain a stable contact resistance below 20 milliohms across hundreds of mating cycles in humid or corrosive environments, whereas tin-plated contacts can oxidize and increase resistance over time, particularly in connector systems mated and unmated frequently during field maintenance.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector