SFM-103-02-FM-D-A-P-TR SAMTEC Connector (Other) In Stock
SFM-103-02-FM-D-A-P-TR is a 6-position dual-row high-reliability socket strip from SAMTEC with 0.050 inch (1.27 mm) pitch in a surface-mount package, ideal for compact board-to-board and module interconnect applications. Available from stock with worldwide shipping.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- SFM-103-02-FM-D-A-P-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SFM-103-02-FM-D-A-P-TR?
- 6-position dual-row layout on 0.050 inch pitch for compact, high-density PCB footprints
- Surface-mount termination in tape-and-reel format for automated pick-and-place assembly
- High-reliability contact system rated for extended mating cycles with gold-plated contacts
- FM suffix indicating flush-mount solder tail for low-profile PCB attachment
- Compatible with SAMTEC TSM family headers enabling flexible mezzanine stack heights
What is SFM-103-02-FM-D-A-P-TR used for?
SFM-103-02-FM-D-A-P-TR is used in compact module attachment, sensor interface boards, and small daughter-card connections where only 6 signal or power contacts are needed in a minimal footprint. The dual-row 0.050 inch pitch allows placement in tight PCB areas on medical devices, portable instrumentation, and IoT hardware. Tape-and-reel packaging enables cost-effective automated assembly in high-volume production runs.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the SFM-103-02-FM-D-A-P-TR datasheet?
SFM-103-02-FM-D-A-P-TR Datasheet DownloadOfficial datasheet from SAMTEC
What are equivalent replacements for SFM-103-02-FM-D-A-P-TR?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How many contacts does SFM-103-02-FM-D-A-P-TR provide, and what is its pin pitch?
SFM-103-02-FM-D-A-P-TR provides 6 contacts in a dual-row arrangement, with 3 pins per row on a 0.050 inch (1.27 mm) pitch. This compact layout fits into a PCB footprint of approximately 5 mm x 3 mm, suitable for space-constrained designs in wearables and portable devices.
What current rating and contact resistance should designers expect from SFM-103-02-FM-D-A-P-TR?
SAMTEC SFM connectors at 0.050 inch pitch are rated at 1 A per contact with contact resistance below 20 milliohm. Operating voltage is up to 125 V AC/DC, making these 6-position connectors suitable for low-power digital signal and 3.3 V or 5 V power connections on small PCBs.
Which mating connector pairs with SFM-103-02-FM-D-A-P-TR in a board-to-board stack?
SFM-103-02-FM-D-A-P-TR mates with SAMTEC TSM-103 series headers sharing the same 0.050 inch dual-row pitch and 6-position count. Mating stack heights range from approximately 4 mm to 20 mm, supporting rigid daughter-card to carrier-board assemblies in telecom and test equipment.
Does the tape-and-reel (TR) packaging of SFM-103-02-FM-D-A-P-TR support high-volume SMT assembly?
Yes, the TR designation confirms tape-and-reel packaging compatible with automated pick-and-place equipment for high-volume SMT lines. The surface-mount termination withstands standard reflow soldering profiles up to 260°C per IPC/JEDEC J-STD-020, reducing manual assembly cost on industrial and consumer electronics boards.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
10214-6212PC
3M
Connector
1778573
Phoenix Contact
Connector
5227222-3
TE Connectivity
Connector
S4B-XH-SM4-TB(LF)(SN)
JST (JAPAN SOLDERLESS TERMINALS)
Connector
185226-2
TE Connectivity
Connector
0533980571
Molex
Connector
0360-0-15-01-34-27-10-0
Mill-Max
Connector
7850-0006PR
3M
Connector
AVB 1,5/2/12
BLOCK
Connector
N3764-5002RB
3M
Connector
N3627-6002RB
3M
Connector
N3627-5002RB
3M
Connector
N3440-6002RB
3M
Connector
929715-03-36-I
3M
Connector
929667-02-36-I
3M
Connector
929665-04-36-I
3M
Connector
929665-02-36-I
3M
Connector
929647-04-36-I
3M
Connector
929647-03-36-I
3M
Connector
7834-0006PR
3M
Connector
7826-0006PR
3M
Connector
7820-0006PR
3M
Connector
3440-5002
3M
Connector
3433-5302
3M
Connector