SFM-102-T2-F-D-K-TR SAMTEC Connector (Other) In Stock
SAMTEC SFM-102-T2-F-D-K-TR is a 4-position dual-row high-reliability socket strip with 0.050" (1.27 mm) pitch in surface-mount configuration. It accepts standard 0.050" male headers and is rated for 1 A per contact at up to 150°C operating temperature.
- Manufacturer
- SAMTEC
- Package
- Other
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- SFM-102-T2-F-D-K-TR Datasheet PDF
- Category
- Connector
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual-row 0.050" (1.27 mm) pitch SMT socket strip with 4 positions (2×2) for compact board-to-board or wire-to-board interconnects
- High-cycle-life contacts rated at 1 A per pin and operating temperature range up to 150°C for reliable signal integrity
- Tape-and-reel (TR) packaging and tight positional tolerance support high-volume automated SMT assembly
Applications
The SFM-102-T2-F-D-K-TR is well suited for dense PCB designs that require reliable low-profile board-to-board mating at 0.050" pitch, such as industrial control modules, test-and-measurement boards, and embedded processor daughtercard connections. Its surface-mount footprint and tape-and-reel format make it compatible with fully automated pick-and-place assembly lines. The dual-row layout maximises contact density in constrained board areas where through-hole connectors are impractical.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the contact pitch and row configuration of the SFM-102-T2-F-D-K-TR?
The SFM-102-T2-F-D-K-TR uses a 0.050" (1.27 mm) pitch in a dual-row, 4-position (2×2) arrangement, giving a very compact footprint suitable for high-density SMT board designs where space is limited.
What current and temperature limits must designers observe when using SFM-102-T2-F-D-K-TR in a power rail?
Each contact is rated at 1 A continuous current, and the connector operates across a temperature range up to 150°C. Designers should derate current accordingly if the ambient temperature rises above 85°C to maintain long-term connector reliability.
Which SAMTEC mating header series is compatible with SFM-102-T2-F-D-K-TR for a 0.050" board-to-board stack?
The SFM series mates with SAMTEC's TFM and SHF male header series, which also use 0.050" (1.27 mm) pitch. Both series are available in dual-row configurations, allowing flexible 2-pin to 100-pin board-to-board assemblies at the same 1.27 mm grid.
How does the tape-and-reel (TR) suffix affect procurement and SMT assembly of SFM-102-T2-F-D-K-TR?
The TR suffix means parts are supplied on standard tape-and-reel media compatible with 12 mm or 16 mm feeder slots, enabling automated pick-and-place at typical placement rates. Minimum order quantities for tape-and-reel reels are usually 1,000 pieces, so buyers should plan accordingly for prototype versus production volumes.
Related Guides
How to Choose a Digital Potentiometer: AD5204, AD5206, and AD8403 Selection Guide
Compare the AD5204, AD5206, and AD8403 multi-channel SPI digipots by channel count, resistance value, and package to choose the right Analog Devices digital potentiometer for your design.
Jun 21, 2026
AD7745 / AD7746 / AD7747 Capacitance-to-Digital Converter Design Guide
Complete application note for the AD774x CDC family: circuit design, shielding, conversion rate selection, and sourcing guidance for the AD7745, AD7746, and AD7747.
Jun 21, 2026
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
Why Buy from FindMyChip
About SAMTEC
SAMTEC is a leading electronic component manufacturer. FindMyChip sources SAMTEC ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”