RN-0505S RECOM Power Power Supply (Other) In Stock
The RECOM RN-0505S is an unregulated 5 V to 5 V isolated DC/DC converter module accepting a 4.5 V to 5.5 V input and delivering a single isolated 5 V output in a compact 4-pin DIP package, providing galvanic isolation for signal and power interfaces in industrial and communications equipment.
- Manufacturer
- RECOM Power
- Package
- Other
- Pin Count
- 4
- Lifecycle
- ACTIVE
- Datasheet
- RN-0505S Datasheet PDF
- Category
- Power Supply
- Price
- From $5.6635(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of RN-0505S?
- 4.5 V to 5.5 V input range accepts standard 5 V logic and USB power rails directly
- Single isolated 5 V output provides galvanic isolation without external transformer winding
- 4-pin DIP package enables through-hole PCB integration with minimal footprint and simple layout
- Unregulated single-output topology minimizes solution cost for low-power isolated power requirements
- RoHS-compliant construction meets global environmental compliance for industrial and commercial designs
What is RN-0505S used for?
The RN-0505S is used to provide isolated power to RS-232, RS-485, and CAN bus interface circuits where a ground potential difference between equipment must be blocked to prevent data errors or ground-loop currents. Its compact 4-pin DIP form factor suits signal isolator daughter boards, isolated sensor supply rails, and protection circuits in industrial PLCs, HVAC controllers, and medical instrument peripherals. The 5 V-to-5 V topology also powers isolated ADC reference supplies in data-acquisition modules that share a common 5 V backplane.
What are the specifications of RN-0505S?
| Pbfree Code | Yes |
| Reach Compliance Code | Compliant |
| YTEOL | 5 |
| Analog IC - Other Type | DC-DC UNREGULATED POWER SUPPLY MODULE |
| Input Voltage-Max | 5.5V |
| Input Voltage-Min | 4.5V |
| Input Voltage-Nom | 5V |
| JESD-30 Code | R-PDIP-T4 |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Current-Max | 0.25A |
| Output Voltage-Max | 5.25V |
| Output Voltage-Min | 4.75V |
| Output Voltage-Nom | 5V |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP4/8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Surface Mount | NO |
| Temperature Grade | INDUSTRIAL |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Total Power Output-Max | 1.25W |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| Country of Origin | Mainland China, Taiwan |
Where can I find the RN-0505S datasheet?
RN-0505S Datasheet DownloadOfficial datasheet from RECOM Power
What are equivalent replacements for RN-0505S?
Compatible alternatives and drop-in replacements for RN-0505S:
suggested
Frequently Asked Questions
What input voltage range does the RN-0505S accept, and can it operate directly from a USB 5 V rail?
The RN-0505S accepts an input from 4.5 V to 5.5 V, which encompasses the USB 5 V tolerance band defined by the USB 2.0 specification (4.75 V to 5.25 V). It can therefore be powered directly from a USB supply, a regulated 5 V bus, or a 5 V bench power source without additional input conditioning, making it convenient for USB-to-isolated-bus adapters and PC-based instrumentation.
How does galvanic isolation from the RN-0505S protect RS-485 transceivers in industrial networks?
Industrial RS-485 networks connecting equipment across large facilities can develop ground potential differences of 100 V or more between nodes. The RN-0505S provides galvanic isolation between the system 5 V rail and the bus transceiver supply, blocking these fault voltages from propagating into the control CPU. A typical isolated RS-485 interface using the RN-0505S paired with an isolated signal coupler achieves 1 kV to 2.5 kV isolation voltage, protecting sensitive logic from surge and common-mode transients.
Is the RN-0505S regulated, and how should designers handle load-dependent output voltage variation?
The RN-0505S is an unregulated converter, meaning output voltage varies with load current — typically from around 5.5 V at no load to approximately 5 V at rated load. For loads requiring a stable voltage within ±5%, designers should add a low-dropout linear regulator (LDO) on the output or ensure the downstream circuit tolerates a 5 V to 5.5 V input range. For purely digital isolated supplies this variation is usually acceptable without additional regulation.
What PCB layout considerations apply when mounting the RN-0505S 4-pin DIP package?
The 4-pin DIP package uses standard 2.54 mm (100 mil) through-hole pitch, fitting common DIP footprints with no custom land pattern required. Place input decoupling capacitors of at least 10 µF and 100 nF within 5 mm of the input pins to suppress switching noise, and keep the isolated output traces separated from input-side copper by the required creepage distance — typically 4 mm minimum for basic isolation per IEC 60950-1 for 250 V working voltage.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About RECOM Power
RECOM Power is a leading electronic component manufacturer. FindMyChip sources RECOM Power ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $8.1200 | $8.12 |
| 4+ | $7.4520 | $29.81 |
| 5+ | $7.3626 | $36.81 |
| 19+ | $5.9800 | $113.62 |
| 20+ | $5.6635 | $113.27 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
BD33GC0WEFJ-E2
ROHM Semiconductor
Power Supply
TMF 10115
Traco Power
Power Supply
TMF 10112
Traco Power
Power Supply
TNY275GN-TL
Power Integrations
Power Supply
SCW03C-12
Mean Well
Power Supply
SCW03A-12
Mean Well
Power Supply
V150C28C150BL
VICOR
Power Supply
V150C24C150BL
VICOR
Power Supply
TMG 30115
Traco Power
Power Supply
TMG 30103
Traco Power
Power Supply
THM 10-1212
Traco Power
Power Supply
THM 10-4811
Traco Power
Power Supply
THM 10-1213
Traco Power
Power Supply
THM 10-0511
Traco Power
Power Supply
THM 10-1215
Traco Power
Power Supply
THM 10-1222
Traco Power
Power Supply
THM 10-2422
Traco Power
Power Supply
THM 10-0523
Traco Power
Power Supply
THM 10-1223
Traco Power
Power Supply
THM 10-4822
Traco Power
Power Supply
THM 10-2410
Traco Power
Power Supply
THM 10-2412
Traco Power
Power Supply
THM 10-4810
Traco Power
Power Supply
THM 10-0513
Traco Power
Power Supply