RK73H1J-KIT KOA Speer Capacitor (Capacitor Chip Non-polarised) In Stock
KOA Speer RK73H1J-KIT is a comprehensive assortment kit of 0603 SMD thick-film resistors spanning values from 1 Ω to 10 MΩ plus jumper (0 Ω), with 1% tolerance and 100 ppm/°C TCR, ideal for prototyping and stocking engineering labs.
- Manufacturer
- KOA Speer
- Package
- Capacitor Chip Non-polarised
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- N/A
- Category
- Capacitor
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Complete 0603 SMD resistor kit covering 1 Ω to 10 MΩ plus 0 Ω jumper for maximum design flexibility
- 1% tolerance thick-film resistors with 100 ppm/°C temperature coefficient for stable, accurate circuit performance
- Rated at 1/10 W (100 mW) power handling in a compact 0603 (1.6 mm × 0.8 mm) footprint
- Comprehensive E96/E24 value series coverage reduces procurement lead time and supports rapid prototyping cycles
Applications
The RK73H1J-KIT is the go-to solution for electronics engineers needing a broad range of 0603 SMD resistors on hand during prototyping, PCB bring-up, and rework sessions. With values from 1 Ω to 10 MΩ in standard E96 steps and a 0 Ω jumper included, the kit supports biasing networks, voltage dividers, pull-up/pull-down resistors, current-limiting, and filter design across analog, digital, RF, and power-management circuits.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for RK73H1J-KIT:
suggested
suggested
Frequently Asked Questions
What resistance range and tolerance does the RK73H1J-KIT cover?
The RK73H1J-KIT spans from 1 Ω to 10 MΩ, including a 0 Ω jumper, all in 1% tolerance thick-film 0603 resistors with a 100 ppm/°C temperature coefficient. This broad range supports voltage dividers, current-limiting, pull-up and pull-down networks, and biasing circuits across a wide variety of electronic designs.
How much power can each resistor in the RK73H1J-KIT handle, and does that limit its use in power circuits?
Each resistor in the kit is rated at 1/10 W (100 mW) continuous dissipation, which is standard for 0603 SMD resistors. For circuits operating at 3.3 V or 5 V logic levels, this is more than sufficient for signal-conditioning, biasing, and filtering functions. Higher-power applications above 100 mW per resistor would require larger package sizes such as 0805 or 1206.
For which engineering workflows does the RK73H1J-KIT provide the greatest productivity benefit?
This resistor kit delivers the highest value during PCB prototyping, lab bring-up, and field rework where having all standard 0603 E96 values from 1 Ω to 10 MΩ immediately available eliminates the delays of ordering individual reel quantities. Engineers working on analog filters, sensor interfaces, and microcontroller peripherals requiring precise 1% resistors particularly benefit from the kit's complete value coverage in a single procurement action.
Can the 0 Ω jumper included in the RK73H1J-KIT replace a wire bridge in a PCB design?
Yes, the 0 Ω jumper (JP) in the RK73H1J-KIT is a 0603-footprint resistor with less than 50 mΩ resistance, used to bridge traces on two-layer PCBs or to enable optional signal paths without changing the board layout. It is current-limited to approximately 1 A continuous and is rated to the same 100 mW thermal limit as the other resistors in the kit.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About KOA Speer
KOA Speer is a leading electronic component manufacturer. FindMyChip sources KOA Speer ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”