RD12S-A Renesas Electronics Integrated Circuit (Small Outline Diode) In Stock
The RD12S-A is a 12 V Zener diode from Renesas with a 0.2 W power dissipation rating, housed in a compact 2-pin Super MiniMold SMT package for voltage clamping and overvoltage protection in consumer and industrial circuits.
- Manufacturer
- Renesas Electronics
- Package
- Small Outline Diode
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- RD12S-A Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 12 V Zener breakdown voltage providing precise voltage clamping for overvoltage protection in signal lines
- 0.2 W power dissipation rating in a space-saving 2-pin Super MiniMold SMT package
- Surface-mount construction enables high-density PCB placement alongside SMD passives and ICs
- Low leakage current in reverse-bias for minimal power draw in battery-operated protection circuits
- Compatible with reflow soldering and tape-and-reel packaging for automated high-volume assembly
Applications
The RD12S-A Zener diode is used to clamp signal lines and rail voltages at 12 V in consumer electronics, set-top boxes, and low-power communication interfaces where transient overvoltage events must be suppressed. Its 0.2 W rating and compact Super MiniMold footprint allow it to fit alongside SMD components in tight PCB layouts without a thermal heatsink. Industrial sensor inputs and automotive accessory circuits also employ this device to protect MCU I/O pins from voltage excursions above 12 V.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for RD12S-A:
suggested
suggested
suggested
suggested
suggested
Frequently Asked Questions
What is the Zener breakdown voltage and power rating of the RD12S-A, and what load conditions does it support?
The RD12S-A has a nominal Zener voltage of 12 V with a maximum continuous power dissipation of 0.2 W. At the rated 12 V clamp level, this limits steady-state Zener current to approximately 16 mA, making it suitable for signal-line clamping and low-current bias protection rather than high-power linear regulation.
How does the RD12S-A Super MiniMold package compare to a standard SOD-123 in PCB space requirements?
The Super MiniMold package is a compact 2-pin SMT outline similar in footprint to a SOD-323, measuring roughly 1.6 mm × 0.8 mm compared to the SOD-123's 3.5 mm × 1.5 mm body. This smaller profile allows the RD12S-A to be placed in high-density areas near IC I/O pins on boards where every mm² counts.
In which circuit positions does the RD12S-A provide effective overvoltage protection?
The RD12S-A is placed in shunt configuration—cathode toward the positive rail—across signal lines or power nodes that must not exceed 12 V. It clamps transients on RS-232 interfaces, sensor excitation lines, and GPIO protection networks where peak transient energy stays within the 0.2 W thermal budget and pulse duration is kept below 1 ms.
Can the RD12S-A be used in automotive accessory circuits, and what temperature range is supported?
The RD12S-A is suitable for 12 V automotive accessory circuits such as LED driver enable lines and CAN transceiver protection nodes where the nominal rail matches its 12 V Zener clamp. Renesas specifies storage and operating temperatures typical of -55°C to 150°C for this Super MiniMold package, covering both underhood and cabin environments in passenger vehicles.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Renesas Electronics
Renesas Electronics is a Japanese semiconductor manufacturer specializing in microcontrollers, analog products, and SoC solutions for automotive, industrial, and IoT applications.
More from Renesas Electronics
M10042040054X0IWAR
Small Outline No-lead
Integrated Circuit
M10162040054X0PWAR
Small Outline No-lead
Integrated Circuit
HD64F2633F25V
Quad Flat Packages
Integrated Circuit
HD64F3048BF25V
Quad Flat Packages
Integrated Circuit
M30042040108X0IWAY
Small Outline No-lead
Integrated Circuit
M30042040108X0ISAR
Small Outline Packages
Integrated Circuit
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”