QTE-014-01-L-D-DP-AAlternatives & Equivalent Parts
About QTE-014-01-L-D-DP-A
QTE-014-01-L-D-DP-A is a Connector component manufactured by SAMTEC. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 6 alternatives for QTE-014-01-L-D-DP-A — response within 24 hours.
Specification Comparison
| Parameter | QTE-014-01-L-D-DP-ASource | ADN2830ACPZ32 | ADN8835ACPZ-R7 | LMV7271MF | OPA855IDSGR | HMC799LP3E | TPS7A4701RGWT |
|---|---|---|---|---|---|---|---|
| Manufacturer | SAMTEC | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments | Analog Devices | Texas Instruments |
| Package Type | Other | Quad Flat No-Lead | Quad Flat No-Lead | — | Small Outline No-lead | Quad Flat No-Lead | — |
| Pin Count | 32 | 32 | 36 | — | 9 | 16 | — |
| Temperature Range | -55.0°C ~ 125.0°C | -40.0°C ~ 85.0°C | -40.0°C ~ 125.0°C | — | -40.0°C ~ 125.0°C | -40.0°C ~ 85.0°C | — |
| Price | $2.1938 | $16.0453 | $10.6250 | $0.3814 | $2.7918 | $31.7158 | $2.5718 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | NOT RECOMMENDED | ACTIVE | — | ACTIVE | OBSOLETE | — |
| Electrical Parameters | |||||||
| Pbfree Code | Yes | No | No | — | Yes | No | — |
| Factory Lead Time | 2 Weeks, 4 Days | — | — | — | — | — | — |
| YTEOL | 8.68 | 3 | 10 | — | 15 | 0 | — |
| Additional Feature | E.L.P., POLARIZED | — | — | — | — | LOW NOISE | — |
| Board Mounting Option | LOCATING POSTS | — | — | — | — | — | — |
| Body Breadth | 0.235 inch | — | — | — | — | — | — |
| Body Depth | 0.168 inch | — | — | — | — | — | — |
| Body/Shell Style | RECEPTACLE | — | — | — | — | — | — |
| Connector Type | BOARD STACKING CONNECTOR | — | — | — | — | — | — |
| Contact Finish Mating | GOLD (10) OVER NICKEL (50) | — | — | — | — | — | — |
| Contact Finish Termination | Gold (Au) - with Nickel (Ni) barrier | — | — | — | — | — | — |
| Contact Gender | MALE | — | — | — | — | — | — |
| Contact Material | NOT SPECIFIED | — | — | — | — | — | — |
| Contact Pattern | RECTANGULAR | — | — | — | — | — | — |
| Contact Resistance | 15 mΩ | — | — | — | — | — | — |
| Contact Style | CENTRONIC | — | — | — | — | — | — |
| DIN Conformance | NO | — | — | — | — | — | — |
| Dielectric Withstanding Voltage | 675VAC V | — | — | — | — | — | — |
| Durability | 500 Cycles | — | — | — | — | — | — |
| Filter Feature | NO | — | — | — | — | — | — |
| IEC Conformance | NO | — | — | — | — | — | — |
| Insulation Resistance | 5000000000 Ω | — | — | — | — | — | — |
| Insulator Color | BLACK | — | — | — | — | — | — |
| Insulator Material | LIQUID CRYSTAL POLYMER | — | — | — | — | — | — |
| JESD-609 Code | e4 | e3 | e3 | — | e4 | e3 | — |
| MIL Conformance | NO | — | — | — | — | — | — |
| Mating Contact Pitch | 0.031 inch | — | — | — | — | — | — |
| Mating Information | MULTIPLE MATING PARTS AVAILABLE | — | — | — | — | — | — |
| Mixed Contacts | NO | — | — | — | — | — | — |
| Mounting Option 1 | LOCKING | — | — | — | — | — | — |
| Mounting Style | STRAIGHT | — | — | — | — | — | — |
| Mounting Type | BOARD | — | — | — | — | — | — |
| Number Of Connectors | ONE | — | — | — | — | — | — |
| Number Of PCB Rows | 2 | — | — | — | — | — | — |
| Number of Rows Loaded | 2 | — | — | — | — | — | — |
| Option | GENERAL PURPOSE | — | — | — | — | — | — |
| Plating Thickness | 10u inch | — | — | — | — | — | — |
| Polarization Key | POLARIZED HOUSING | — | — | — | — | — | — |
| Rated Current (Signal) | 2 A | — | — | — | — | — | — |
| Reference Standard | UL, CSA | — | — | — | — | — | — |
| Terminal Pitch | 0.8 mm | 0.5 mm | 0.5 mm | — | 0.5 mm | — | — |
| Termination Type | SURFACE MOUNT | — | — | — | — | — | — |
| Total Number of Contacts | 28 | — | — | — | — | — | — |
| Manufacturer Package Code | — | CP-32-2 | CP-36-5 | — | — | HCP-16-3 | — |
| Interface IC Type | — | INTERFACE CIRCUIT | — | — | — | — | — |
| JESD-30 Code | — | S-XBCS-N32 | S-PQCC-N36 | — | S-PDSO-N8 | — | — |
| Number of Functions | — | 1 | 1 | — | 1 | — | — |
| Package Body Material | — | UNSPECIFIED | PLASTIC/EPOXY | — | PLASTIC/EPOXY | — | — |
| Package Equivalence Code | — | LCC32,.2SQ,20 | — | — | SOLCC8,.08,20 | — | — |
| Package Shape | — | SQUARE | SQUARE | — | SQUARE | — | — |
| Package Style | — | CHIP SCALE | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE | — | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE | — | — |
| Supply Voltage-Max | — | 5.5 V | — | — | — | — | — |
| Supply Voltage-Min | — | 4.5 V | — | — | — | — | — |
| Supply Voltage-Nom | — | 5 V | — | — | — | — | — |
| Surface Mount | — | YES | YES | — | YES | — | — |
| Terminal Finish | — | Matte Tin (Sn) | Matte Tin (Sn) | — | Nickel/Palladium/Gold (Ni/Pd/Au) | Matte Tin (Sn) | — |
| Terminal Form | — | NO LEAD | NO LEAD | — | NO LEAD | — | — |
| Terminal Position | — | QUAD | QUAD | — | DUAL | — | — |
| Analog IC - Other Type | — | — | ANALOG CIRCUIT | — | — | — | — |
| Supply Voltage-Max (Vsup) | — | — | 5.5 V | — | — | — | — |
| Supply Voltage-Min (Vsup) | — | — | 2.7 V | — | — | — | — |
| Temperature Grade | — | — | AUTOMOTIVE | — | AUTOMOTIVE | — | — |
| Amplifier Type | — | — | — | — | OPERATIONAL AMPLIFIER | — | — |
| Architecture | — | — | — | — | VOLTAGE-FEEDBACK | — | — |
| Average Bias Current-Max (IIB) | — | — | — | — | 5 µA | — | — |
| Bias Current-Max (IIB) @25C | — | — | — | — | 5 µA | — | — |
| Common-mode Reject Ratio-Min | — | — | — | — | 90 dB | — | — |
| Common-mode Reject Ratio-Nom | — | — | — | — | 100 dB | — | — |
| Frequency Compensation | — | — | — | — | YES | — | — |
| Input Offset Voltage-Max | — | — | — | — | 1500 µV | — | — |
| Low-Bias | — | — | — | — | NO | — | — |
| Low-Offset | — | — | — | — | YES | — | — |
| Micropower | — | — | — | — | NO | — | — |
| Packing Method | — | — | — | — | TR, 7 INCH | — | — |
| Peak Reflow Temperature (Cel) | — | — | — | — | 260 | — | — |
| Power | — | — | — | — | NO | — | — |
| Programmable Power | — | — | — | — | NO | — | — |
| Slew Rate-Nom | — | — | — | — | 2750 V/us | — | — |
| Supply Current-Max | — | — | — | — | 19.5 mA | — | — |
| Supply Voltage Limit-Max | — | — | — | — | 5.5 V | — | — |
| Supply Voltage-Nom (Vsup) | — | — | — | — | 5 V | — | — |
| Technology | — | — | — | — | BICMOS | — | — |
| Time@Peak Reflow Temperature-Max (s) | — | — | — | — | 30 | — | — |
| Unity Gain BW-Nom | — | — | — | — | 8000000 | — | — |
| Voltage Gain-Min | — | — | — | — | 3162.278 | — | — |
| Wideband | — | — | — | — | YES | — | — |
| ## OPA855IDSGR Alternates Showing results | — | — | — | — | Image | — | — |
| Characteristic Impedance | — | — | — | — | — | 50 Ω | — |
| Construction | — | — | — | — | — | COMPONENT | — |
| Gain | — | — | — | — | — | 42 dB | — |
| Operating Frequency-Max | — | — | — | — | — | 700 MHz | — |
| RF/Microwave Device Type | — | — | — | — | — | WIDE BAND LOW POWER | — |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 6 alternatives for QTE-014-01-L-D-DP-A — response within 24 hours.
Quick Links
suggested
suggested
suggested
suggested
suggested
Why Look for Alternatives?
Finding alternatives for QTE-014-01-L-D-DP-A is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating QTE-014-01-L-D-DP-A replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for QTE-014-01-L-D-DP-A. Get expert recommendations within 24 hours.
FAQ
What is equivalent to QTE-014-01-L-D-DP-A?
Known equivalents for QTE-014-01-L-D-DP-A include ADN2830ACPZ32, ADN8835ACPZ-R7, LMV7271MF. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of QTE-014-01-L-D-DP-A?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify QTE-014-01-L-D-DP-A alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.