PT65103Alternatives & Equivalent Parts
About PT65103
PT65103 is a Switch component manufactured by Apem. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for PT65103 — response within 24 hours.
Specification Comparison
| Parameter | PT65103Source | 2312-H-RC | MJD122T4 | LM2596S-3.3/NOPB | FS10CT-12 |
|---|---|---|---|---|---|
| Manufacturer | Apem | Bourns | STMicroelectronics | Texas Instruments | XP POWER |
| Package Type | Other | Other | Other | Other | Other |
| Pin Count | 6 | 2 | 3 | 4 | 8 |
| Temperature Range | -20.0°C ~ 70.0°C | -55.0°C ~ 105.0°C | ~ 150.0°C | -40.0°C ~ 125.0°C | -25.0°C ~ 75.0°C |
| Price | $2.3800 | $1.9711 | $0.2067 | $1.8054 | $202.9908 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Pbfree Code | Yes | Yes | — | Yes | — |
| YTEOL | 7 | 7 | 9 | 15 | 6 |
| Actuator Material | NYLON | — | — | — | — |
| Actuator Type | SCREW DRIVER | — | — | — | — |
| Additional Feature | O-RING Si RUBBER ACTUATOR SEAL | — | — | — | 0 TO -500V OUTPUT IS ALSO AVAILABLE |
| Body Breadth | 10 mm | — | — | — | — |
| Body Height | 6.5 mm | — | — | — | — |
| Body Length or Diameter | 10 mm | — | — | — | — |
| Center Contact Material | PHOSPHOR BRONZE | — | — | — | — |
| Center Contact Plating | GOLD OVER NICKEL | — | — | — | — |
| Contact Current(DC)-Max | 0.4 A | — | — | — | — |
| Contact (DC) Max Power Rating R Load | 1.5VA@24VDC | — | — | — | — |
| Contact (DC) Max Rating R Load | .4A@24VDC | — | — | — | — |
| Contact Function | ON-OFF | — | — | — | — |
| Contact Resistance | 0.08 mΩ | — | — | — | — |
| Contact Timing | BREAK-BEFORE-MAKE | — | — | — | — |
| Contact Voltage(DC)-Max | 24 V | — | — | — | — |
| Electrical Life | 10000 Cycle(s) | — | — | — | — |
| End Contact Material | PHOSPHOR BRONZE | — | — | — | — |
| End Contact Plating | GOLD OVER NICKEL | — | — | — | — |
| Indexing Angle | 22.5 deg | — | — | — | — |
| Insulation Resistance | 100000000 Ω | — | — | — | — |
| Insulator Material | THERMOPLASTIC | — | — | — | — |
| JESD-609 Code | e3 | — | e3 | e3 | — |
| Mounting Feature | THROUGH HOLE-STRAIGHT | — | — | — | — |
| Number of Positions | 16 | — | — | — | — |
| Number of Switch Sections | 1 | — | — | — | — |
| PCB Hole Count | 6 | — | — | — | — |
| Packing Method | TUBE | — | — | — | — |
| Sealing | MOLDED | — | — | — | — |
| Solderability | WAVE | — | — | — | — |
| Surface Mount | NO | NO | YES | YES | NO |
| Switch Action | LATCHED | — | — | — | — |
| Switch Function | BINARY CODED HEXADECIMAL | — | — | — | — |
| Switch Type | ROTARY CODED SWITCH | — | — | — | — |
| Terminal Finish | Tin (Sn) | — | Matte Tin (Sn) - annealed | Matte Tin (Sn) | — |
| Terminal Length | 0.15 inch | — | — | — | — |
| Terminal Material | BRASS | — | — | — | — |
| Termination Type | SOLDER | — | — | — | — |
| Washability | SOLVENT | — | — | — | — |
| Factory Lead Time | — | 25 Weeks | 14 Weeks | — | — |
| Construction | — | Hortizontal Mount | — | — | — |
| DC Resistance | — | 0.037 Ω | — | — | — |
| Inductance-Nom (L) | — | 100 µH | — | — | — |
| Inductor Application | — | HIGH CURRENT INDUCTOR | — | — | — |
| Inductor Type | — | GENERAL PURPOSE INDUCTOR | — | — | — |
| Lead Diameter | — | 1.0668 mm | — | — | — |
| Lead Spacing | — | 28.702 mm | — | — | — |
| Number of Functions | — | 1 | — | 1 | 1 |
| Package Diameter | — | 32.512 mm | — | — | — |
| Package Length | — | 16.51 mm | — | — | — |
| Package Style | — | Toroidal | SMALL OUTLINE | SMALL OUTLINE | MICROELECTRONIC ASSEMBLY |
| Rated Current-Max | — | 7 A | — | — | — |
| Shape/Size Description | — | CYLINDRICAL PACKAGE | — | — | — |
| Shielded | — | YES | — | — | — |
| Terminal Placement | — | RADIAL | — | — | — |
| Terminal Shape | — | WIRE | — | — | — |
| Test Frequency | — | 0.001 MHz | — | — | — |
| Tolerance | — | 15% | — | — | — |
| Case Connection | — | — | COLLECTOR | — | — |
| Collector Current-Max (IC) | — | — | 8 A | — | — |
| Collector-Emitter Voltage-Max | — | — | 100 V | — | — |
| Configuration | — | — | DARLINGTON WITH BUILT-IN DIODE AND RESISTOR | — | — |
| DC Current Gain-Min (hFE) | — | — | 100 | — | — |
| JEDEC-95 Code | — | — | TO-252 | — | — |
| JESD-30 Code | — | — | R-PSSO-G2 | R-PSSO-G5 | R-XXMA-X8 |
| Number of Elements | — | — | 1 | — | — |
| Package Body Material | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY | UNSPECIFIED |
| Package Shape | — | — | RECTANGULAR | RECTANGULAR | RECTANGULAR |
| Peak Reflow Temperature (Cel) | — | — | 260 | 245 | — |
| Polarity/Channel Type | — | — | NPN | — | — |
| Power Dissipation Ambient-Max | — | — | 20 W | — | — |
| Power Dissipation-Max (Abs) | — | — | 20 W | — | — |
| Qualification Status | — | — | Not Qualified | Not Qualified | — |
| Terminal Form | — | — | GULL WING | GULL WING | UNSPECIFIED |
| Terminal Position | — | — | SINGLE | SINGLE | UNSPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | — | — | 30 | 30 | — |
| Transistor Application | — | — | SWITCHING | — | — |
| Transistor Element Material | — | — | SILICON | — | — |
| VCEsat-Max | — | — | 4 V | — | — |
| ## MJD122T4 Alternates Showing results | — | — | Image | — | — |
| Analog IC - Other Type | — | — | — | SWITCHING REGULATOR | DC-DC UNREGULATED POWER SUPPLY MODULE |
| Control Mode | — | — | — | VOLTAGE-MODE | — |
| Input Voltage-Max | — | — | — | 40 V | 12 V |
| Input Voltage-Min | — | — | — | 4.5 V | 0.7 V |
| Input Voltage-Nom | — | — | — | 12 V | 12 V |
| Number of Outputs | — | — | — | 1 | 2 |
| Output Current-Max | — | — | — | 3 A | 0.01 A |
| Output Voltage-Max | — | — | — | 37 V | 500 V |
| Output Voltage-Min | — | — | — | 3.3 V | — |
| Output Voltage-Nom | — | — | — | 3.3 V | — |
| Package Equivalence Code | — | — | — | SMSIP5H,.6,67TB | — |
| Switcher Configuration | — | — | — | BUCK | — |
| Switching Frequency-Max | — | — | — | 173 kHz | — |
| Temperature Grade | — | — | — | AUTOMOTIVE | — |
| Terminal Pitch | — | — | — | 1.7 mm | — |
| ## LM2596S-3.3/NOPB Alternates Showing results | — | — | — | Image | — |
| Protections | — | — | — | — | CURRENT LIMIT; OVER VOLTAGE; THERMAL; SHORT CIRCUIT |
| Ripple Voltage (Main Out) | — | — | — | — | 1.7675 Vrms |
| Technology | — | — | — | — | HYBRID |
| Total Power Output-Max | — | — | — | — | 10 W |
| Trim/Adjustable Output | — | — | — | — | YES |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for PT65103 — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for PT65103 is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating PT65103 replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for PT65103. Get expert recommendations within 24 hours.
FAQ
What is equivalent to PT65103?
Known equivalents for PT65103 include 2312-H-RC, MJD122T4, LM2596S-3.3/NOPB. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of PT65103?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify PT65103 alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.