PMOF-9745P-39UQ Mallory Sonalert Loudspeaker or Buzzer (Other) In Stock
The Mallory Sonalert PMOF-9745P-39UQ is an analog omnidirectional electret condenser microphone with a -39dB sensitivity, housed in a compact 9.7mm x 4.5mm cylindrical package with PCB pin termination. It offers a broad pickup pattern for voice and sound capture in consumer and industrial electronics applications. Suitable for intercom systems, voice recognition modules, hearing aids, and portable audio devices requiring a reliable, space-efficient microphone solution.
- Manufacturer
- Mallory Sonalert
- Package
- Other
- Pin Count
- 2
- Lifecycle
- ACTIVE
- Datasheet
- PMOF-9745P-39UQ Datasheet PDF
- Category
- Loudspeaker or Buzzer
- Price
- From $0.2672(MOQ 1)
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of PMOF-9745P-39UQ?
- Omnidirectional pickup pattern captures sound equally from all directions at 360° for versatile voice and ambient audio recording
- -39dB sensitivity provides balanced output level suitable for voice recognition, intercom, and teleconferencing microphone circuits
- Compact 9.7mm x 4.5mm cylindrical form factor with PCB pin termination enables direct through-hole board mounting without additional hardware
- Analog output interface simplifies direct connection to standard audio amplifier and codec circuits without additional ADC components
- Electret condenser technology delivers consistent frequency response across the human voice range (typically 20Hz to 20kHz) in a sealed housing
What is PMOF-9745P-39UQ used for?
The PMOF-9745P-39UQ is commonly used in desktop and portable intercom systems, voice-activated control panels, and speech recognition front-ends where a compact, PCB-mountable omnidirectional microphone is required. Its -39dB sensitivity and analog output make it directly compatible with standard microphone preamplifier circuits and audio codec front-ends used in consumer electronics, industrial HMI panels, and home automation hubs. The cylindrical 9.7mm x 4.5mm package also suits integration into handheld instruments, medical monitoring devices, and IoT voice interface modules where board real estate and weight are constrained.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
Where can I find the PMOF-9745P-39UQ datasheet?
PMOF-9745P-39UQ Datasheet DownloadOfficial datasheet from Mallory Sonalert
What are equivalent replacements for PMOF-9745P-39UQ?
Compatible alternatives and drop-in replacements for PMOF-9745P-39UQ:
suggested
Frequently Asked Questions
What does the -39dB sensitivity rating of the PMOF-9745P-39UQ mean for microphone preamplifier design?
A -39dB sensitivity means the PMOF-9745P-39UQ outputs -39dBV (approximately 11mV) per Pascal of acoustic pressure at 1kHz, referenced to 94dB SPL (1Pa). This output level is standard for electret condenser microphones and is directly compatible with typical microphone preamplifier input stages designed for -40dBV to -35dBV input sensitivity, requiring approximately 30dB to 50dB of gain to bring the signal to a 1V line level. Designers should target a noise floor of at least 20dB below the -39dB output level to achieve acceptable SNR for voice applications.
How does the omnidirectional polar pattern of PMOF-9745P-39UQ affect placement in an intercom or voice recognition enclosure?
The omnidirectional polar pattern of the PMOF-9745P-39UQ provides uniform sensitivity within ±3dB across all azimuthal angles at 1kHz, meaning the microphone captures sound equally well from the front, sides, and rear. In intercom and voice recognition applications, this eliminates the need to precisely orient the microphone toward the speaker, reducing mechanical design constraints. However, omnidirectional capsules also pick up background noise from all directions, so acoustic enclosure design with a minimum 5mm x 5mm sound port aperture and internal damping material is recommended to optimize speech intelligibility in noisy environments above 60dB SPL.
What biasing circuit does the PMOF-9745P-39UQ require, and what supply voltage range is typical for electret condenser microphones?
The PMOF-9745P-39UQ is an electret condenser microphone requiring a DC bias voltage, typically 1.5V to 10V, supplied through a load resistor (commonly 2.2kΩ to 10kΩ) connected between the microphone's drain pin and the positive supply. The built-in FET buffer inside the electret capsule draws approximately 0.1mA to 0.5mA from this bias supply, so a 3.3V or 5V system supply with a 2.2kΩ series resistor provides adequate bias for most applications. The audio output is taken from the junction of the load resistor and the microphone pin, typically through a 0.1µF DC-blocking capacitor.
How does the 9.7mm x 4.5mm PCB-pin package of PMOF-9745P-39UQ compare to surface-mount microphone alternatives for production assembly?
The PMOF-9745P-39UQ uses a through-hole PCB pin package measuring 9.7mm in diameter and 4.5mm in height, which requires manual or automated through-hole insertion rather than pick-and-place SMT assembly. This adds approximately 5 to 10 seconds per board in manual assembly or requires specialized radial insertion equipment in automated lines. SMT electret microphone alternatives in 3528 or 4.0mm x 3.0mm packages are compatible with standard pick-and-place machines and reflow ovens, reducing assembly cost in volumes above 500 units per month. The through-hole PMOF-9745P-39UQ is preferred when the microphone must protrude through a front panel port or when vibration resistance from mechanical solder joint strength is prioritized over assembly throughput.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Mallory Sonalert
Mallory Sonalert is a leading electronic component manufacturer. FindMyChip sources Mallory Sonalert ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.7200 | $0.72 |
| 10+ | $0.5590 | $5.59 |
| 5000+ | $0.2685 | $1342.50 |
| 7500+ | $0.2678 | $2008.50 |
| 10000+ | $0.2672 | $2672.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”
You May Also Like
PKLCS1212E2400-R1
Murata Electronics
Loudspeaker or Buzzer
CBT-09427-SMT-TR
CUI Devices
Loudspeaker or Buzzer
CEM-1203(42)
CUI Devices
Loudspeaker or Buzzer
CMT-1603-SMT-TR
CUI Devices
Loudspeaker or Buzzer
KPEG-204A
KINGSTATE
Loudspeaker or Buzzer
PKM17EPP-2002-B0
Murata Electronics
Loudspeaker or Buzzer
CT-1205H-SMT-TR
CUI Devices
Loudspeaker or Buzzer
WT-1205
Soberton Inc.
Loudspeaker or Buzzer
PKLCS1212E40A1-R1
Murata Electronics
Loudspeaker or Buzzer
PS1740P02E
TDK
Loudspeaker or Buzzer
ABI-033-RC
RS Components
Loudspeaker or Buzzer
DMG3418L-7
Diodes Inc.
Loudspeaker or Buzzer
SMA-13LTP7.5
Sonitron
Loudspeaker or Buzzer
SMA-13-P7.5
Sonitron
Loudspeaker or Buzzer
7800731
RS Components
Loudspeaker or Buzzer
7243178
RS Components
Loudspeaker or Buzzer
7243100
RS Components
Loudspeaker or Buzzer
5117620
RS Components
Loudspeaker or Buzzer
KXG1606
KINGSTATE
Loudspeaker or Buzzer
KXG1203C
KINGSTATE
Loudspeaker or Buzzer
KX-1606
KINGSTATE
Loudspeaker or Buzzer
KTG0905CL
KINGSTATE
Loudspeaker or Buzzer
KSSG23J12
KINGSTATE
Loudspeaker or Buzzer
KPEG232A
KINGSTATE
Loudspeaker or Buzzer