PIC18F14K50-I/MQ Microchip Integrated Circuit (Quad Flat No-Lead) In Stock

PIC18F14K50-I/MQ is an 8-bit PIC18 microcontroller from Microchip with 16 KB Flash, USB 2.0 full-speed interface, 10-bit ADC, and a 20-pin QFN package operating down to 1.8 V at 20 MHz. It supports up to 48 MHz with its internal oscillator and includes 15 I/O pins for compact USB-connected embedded designs. Available from stock worldwide with competitive pricing and fast shipping options.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
PIC18F14K50-I/MQQuad Flat No-Lead
Quick Facts
Manufacturer
Microchip
Package
Quad Flat No-Lead
Pin Count
20
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $2.0900(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • Integrated USB 2.0 full-speed interface eliminates external USB bridge ICs for direct PC connectivity
  • 10-bit ADC with multiple channels enables precise sensor measurements at 1.8 V minimum supply
  • 48 MHz maximum clock with 16 KB Flash supports complex USB HID and CDC firmware in a 20-pin QFN footprint

Applications

The PIC18F14K50-I/MQ targets USB-connected HID devices, CDC virtual COM ports, and low-speed USB data loggers where a compact 20-pin QFN eliminates the need for an external USB bridge chip. Its 1.8 V minimum operation and 10-bit ADC make it suitable for battery-powered USB accessories and wearable diagnostic equipment. The 16 KB Flash provides enough capacity for Microchip USB Framework firmware stacks, reducing development time for custom USB peripherals.

Specifications

Manufacturer Package CodeQFN-20
Factory Lead Time6Weeks
YTEOL8
Has ADCYES
Additional FeatureOPERATES AT 1.8 V MINIMUM SUPPLY AT 20 MHZ
Bit Size8
Boundary ScanYES
CPU FamilyPIC
Clock Frequency-Max48MHz
DAC ChannelsYES
DMA ChannelsNO
JESD-30 CodeS-PQCC-N20
JESD-609 Codee3
Number of I/O Lines17
On Chip Program ROM Width8
PWM ChannelsYES
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeLCC20,.20SQ,25
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (bytes)768
ROM (words)16384
ROM ProgrammabilityFLASH
Speed48MHz
Supply Current-Max15mA
Supply Voltage-Max5.5V
Supply Voltage-Min3V
Supply Voltage-Nom3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.65mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)40
uPs/uCs/Peripheral ICs TypeMICROCONTROLLER, RISC
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCN3A991.A.2
HTS Code8542.31.00.01
Country of OriginThailand

Datasheet

PIC18F14K50-I/MQ Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What USB specification does PIC18F14K50-I/MQ support and what data rate does it achieve on a USB bus?

The PIC18F14K50-I/MQ integrates a USB 2.0 full-speed interface operating at 12 Mbps, with on-chip USB transceiver and 1 KB USB RAM for endpoint buffering. This eliminates the need for an external USB bridge IC such as an FT232 or CP2102, saving approximately 2 USD to 3 USD per unit in BOM cost on high-volume USB HID or CDC designs.

How does the 10-bit ADC on PIC18F14K50-I/MQ perform when operating at the 1.8 V minimum supply?

At 1.8 V supply, the 10-bit ADC on PIC18F14K50-I/MQ resolves signals to approximately 1.76 mV per LSB, suitable for reading resistive sensors, thermistors, and potentiometers. The ADC supports up to 8 input channels with an internal reference, making it practical for multi-axis joystick, battery-monitoring, or multi-sensor data-logger applications without external reference ICs.

For a USB HID game controller design, why choose PIC18F14K50-I/MQ over a lower-cost 8-bit MCU without USB?

Adding USB capability to a non-USB 8-bit MCU requires an external USB bridge costing 1.50 USD to 4 USD plus routing complexity for differential D+ and D- traces. The PIC18F14K50-I/MQ integrates USB 2.0 full-speed at 12 Mbps on-chip in a 20-pin QFN measuring 4 mm × 4 mm, consolidating the design into a single IC and reducing board area by 40% to 60% compared to a dual-chip solution.

What clock frequency options does PIC18F14K50-I/MQ support and how does the internal oscillator compare to an external crystal?

The PIC18F14K50-I/MQ supports an internal oscillator up to 48 MHz and can also use a 4 MHz to 20 MHz external crystal via FOSC. The internal oscillator at 48 MHz has a tolerance of ±1%, which is sufficient for USB full-speed operation since USB timing is managed by the hardware PLL. Eliminating the external crystal saves 0.10 USD to 0.30 USD per unit and frees 2 PCB pins for additional I/O.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $2.0900
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.4917$2.49
100+$2.3900$239.00
1000+$2.1800$2180.00
5000+$2.0900$10450.00
pcs
Unit price: $2.4917 · Total: $2.49

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany