PIC16F882-I/ML Microchip Integrated Circuit (Quad Flat No-Lead) In Stock
Microchip PIC16F882 is an 8-bit PIC16 microcontroller with 2 KB Flash, 20 MHz max clock, 11-channel 10-bit ADC, and a compact 6x6 mm VQFN-28 package suitable for space-constrained designs. Available from stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Quad Flat No-Lead
- Pin Count
- 28
- Lifecycle
- ACTIVE
- Datasheet
- PIC16F882-I/ML Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.8300(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of PIC16F882-I/ML?
- 11-channel 10-bit ADC enabling dense multi-sensor acquisition from a single 8-bit MCU in a 6 mm x 6 mm footprint
- Operates from as low as 2 V at 8 MHz, enabling direct single-cell battery operation without a boost regulator
- VQFN-28 (6 mm x 6 mm) package with 24 I/O pins supporting compact PCB layouts unreachable by larger DIP or SOIC variants
What is PIC16F882-I/ML used for?
PIC16F882-I/ML is well suited for compact sensor nodes, battery-powered wireless tags, and small appliance control circuits where the 6 mm x 6 mm VQFN-28 footprint and 2 V minimum supply allow integration into tight enclosures with coin cell or AAA battery power. Its 11-channel ADC and hardware SPI/I2C peripherals also make it a practical choice for low-cost thermostat controllers, LED dimmer modules, and portable measurement instruments requiring 8-bit compute at up to 20 MHz.
What are the specifications of PIC16F882-I/ML?
| Pbfree Code | Yes |
| Manufacturer Package Code | VQFN-28 |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Has ADC | YES |
| Additional Feature | OPERATES AT 2 V MINIMUM SUPPLY AT 8 MHz |
| Bit Size | 8 |
| Boundary Scan | NO |
| CPU Family | PIC16 |
| Clock Frequency-Max | 20MHz |
| DAC Channels | NO |
| DMA Channels | NO |
| Format | FIXED POINT |
| Integrated Cache | NO |
| JESD-30 Code | S-PQCC-N28 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| Number of External Interrupts | 1 |
| Number of I/O Lines | 24 |
| Number of Serial I/Os | 1 |
| Number of Timers | 5 |
| On Chip Data RAM Width | 8 |
| On Chip Program ROM Width | 8 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC28,.24SQ,25 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, VERY THIN PROFILE, HEAT SINK/SLUG |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| RAM (bytes) | 128 |
| ROM (words) | 3584 |
| ROM Programmability | FLASH |
| Screening Level | TS 16949 |
| Speed | 20MHz |
| Supply Current-Max | 95mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 4.5V |
| Supply Voltage-Nom | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.65mm |
| Terminal Position | QUAD |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| ## PIC16F882-I/ML Alternates Showing results | Image |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Philippines, Thailand |
Where can I find the PIC16F882-I/ML datasheet?
PIC16F882-I/ML Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for PIC16F882-I/ML?
Compatible alternatives and drop-in replacements for PIC16F882-I/ML:
suggested
suggested
suggested
suggested
Frequently Asked Questions
How many ADC channels does PIC16F882-I/ML integrate, and what resolution do they deliver?
The PIC16F882 provides 11 analog input channels routed to a 10-bit successive-approximation ADC, producing 1024 codes over the reference voltage range. At a 3.3 V reference this gives approximately 3.2 mV per LSB, enabling accurate temperature, light, and resistive sensor readings without an external analog multiplexer or ADC chip.
At what minimum supply voltage can PIC16F882-I/ML operate, and why does this matter for coin-cell designs?
The device operates from 2.0 V minimum supply at 8 MHz clock speed. A standard CR2032 coin cell delivers 3.0 V nominal and discharges to about 2.0 V end-of-life, meaning PIC16F882 can run from a single CR2032 without a boost converter throughout the battery's full discharge curve, simplifying low-cost sensor node designs and reducing component count by 2 to 3 parts.
For a PCB with both PIC16F882-I/ML and external SPI flash, what serial peripherals are available on-chip?
PIC16F882 integrates 1 MSSP module configurable as either SPI master/slave or I2C master/slave, plus 1 EUSART supporting asynchronous UART at up to 1 Mbps and synchronous SPI master. These 2 hardware serial interfaces allow simultaneous connection to an SPI flash chip at up to 10 MHz and an I2C sensor bus at 400 kHz without GPIO bit-banging.
When is PIC16F882-I/ML in VQFN-28 a better fit than PIC16F877A in PDIP-40 for a production run?
VQFN-28 (6 mm x 6 mm) occupies roughly 36 mm² versus over 1000 mm² for PDIP-40, enabling the MCU to fit on boards where the DIP package simply cannot be used. For production runs above 1000 units, surface-mount VQFN also lowers assembly cost through automated pick-and-place versus manual DIP insertion. The VQFN package also improves thermal dissipation via its exposed pad, reducing junction temperature by 10°C to 15°C at equivalent power levels.
Related Guides
TLV76033 Selection Guide: Headroom, Heat, and Sourcing
Choose a TLV76033 3.3-V supply using manufacturer ratings, load profiles, dropout calculations, thermal checks, and exact orderable parts.
Nov 14, 2026
DP83TG720SWRHATQ1 Automotive Ethernet Board Design Guide
A practical DP83TG720SWRHATQ1 board checklist for host interfaces, startup, channel validation, qualified variants, and sourcing.
Nov 14, 2026
BQ76942PFBR Battery Monitor Selection and Procurement Guide
Choose BQ76942PFBR by cell count, protection architecture, factory configuration, measurement needs, and a controlled sourcing specification.
Nov 13, 2026
SEP0640Q38CB Surge Protection Board Validation Guide
Validate a SEP0640Q38CB protection network through operating-envelope review, surge-current routing, recovery tests, and assembly checks.
Nov 13, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $2.4500 | $2.45 |
| 25+ | $2.2600 | $56.50 |
| 100+ | $2.1000 | $210.00 |
| 1000+ | $1.9200 | $1920.00 |
| 5000+ | $1.8300 | $9150.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit