PIC16F1783-I/MV Microchip Integrated Circuit (Quad Flat No-Lead) In Stock

The PIC16F1783-I/MV is an 8-bit PIC microcontroller with 32 MHz maximum clock, 4096 words of Flash, 256 bytes of RAM, integrated ADC and DAC, in a compact 28-pin UQFN package for low-power embedded control. Available from stock worldwide with fast shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
PIC16F1783-I/MVQuad Flat No-Lead
Quick Facts
Manufacturer
Microchip
Package
Quad Flat No-Lead
Pin Count
28
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.6000(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 8-bit PIC16 core running up to 32 MHz with 4096 words of self-programmable Flash memory
  • Integrated multi-channel ADC and DAC channels for direct analog signal acquisition and generation
  • Operates from as low as 2.3 V at 16 MHz, enabling battery and energy-harvesting designs
  • 256 bytes of on-chip SRAM plus EEPROM data storage for configuration and calibration data
  • 28-pin UQFN ultra-thin quad flat no-lead package for area-critical PCB designs
  • Rich peripheral set including UART, SPI, I2C, PWM, and comparators in a single chip

Applications

The PIC16F1783-I/MV is designed for compact, cost-effective embedded control applications such as HVAC sensor nodes, smart home actuator drivers, and portable handheld instruments that require analog measurement alongside digital control logic. Its 2.3 V minimum operating voltage and low active-mode current make it a strong choice for battery-powered IoT edge devices and energy-harvesting sensor platforms. The integrated DAC and ADC eliminate external converter ICs, reducing BOM cost and PCB area in space-constrained 28-pin designs.

Specifications

Manufacturer Package CodeUQFN-28
Factory Lead Time11Weeks
YTEOL13
Has ADCYES
Additional FeatureOPERATES AT 2.3 V MINIMUM SUPPLY AT 16 MHZ
Bit Size8
Boundary ScanNO
CPU FamilyPIC16
Clock Frequency-Max32MHz
DAC ChannelsYES
DMA ChannelsNO
FormatFIXED POINT
Integrated CacheNO
JESD-30 CodeS-PQCC-N28
JESD-609 Codee3
Low Power ModeYES
Number of External Interrupts1
Number of I/O Lines25
Number of Serial I/Os1
Number of Timers5
On Chip Data RAM Width8
On Chip Program ROM Width8
PWM ChannelsYES
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeLCC28,.16SQ,16
Package ShapeSQUARE
Package StyleCHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (bytes)512
ROM (words)7168
ROM ProgrammabilityFLASH
Screening LevelTS 16949
Speed32MHz
Supply Current-Max7.5mA
Supply Voltage-Max5.5V
Supply Voltage-Min2.7V
Supply Voltage-Nom3.3V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormNO LEAD
Terminal Pitch0.4mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)40
uPs/uCs/Peripheral ICs TypeMICROCONTROLLER, RISC
PackageQuad Flat No-Lead

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.31.00.01
Country of OriginThailand

Datasheet

PIC16F1783-I/MV Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What is the maximum clock frequency and Flash size of the PIC16F1783-I/MV?

The PIC16F1783-I/MV runs at up to 32 MHz and has 4096 words of Flash program memory together with 256 bytes of SRAM. This combination is sufficient for typical embedded control firmware covering sensor reading, PID loops, and communication stacks in HVAC controllers, motor drivers, and industrial sensor nodes.

How does the 2.3 V minimum supply voltage benefit battery-powered IoT designs?

Running at 2.3 V minimum (at 16 MHz), the PIC16F1783-I/MV can operate directly from two AA alkaline batteries as they discharge below 3 V, extending product runtime significantly compared to devices requiring a 3.3 V minimum. This also simplifies the power path by removing the need for a boost regulator in low-voltage coin-cell or energy-harvesting IoT sensor nodes.

Which on-chip analog peripherals does the PIC16F1783-I/MV include to reduce external component count?

The PIC16F1783-I/MV integrates an ADC, DAC channels, comparators, and a reference voltage module on a single chip. These peripherals allow designers to measure analog sensor signals, generate analog control voltages, and perform threshold detection without adding external ADC or DAC ICs, directly cutting BOM cost and PCB space in a 28-pin UQFN footprint.

How does the PIC16F1783-I/MV compare to the PIC16F1782 for designs that need more program memory?

The PIC16F1783-I/MV provides 4096 words of Flash, which is double the 2048 words found in the PIC16F1782, making it the better choice when firmware exceeds 2 KB or when code space is needed for bootloaders, USB stacks, or more complex state machines. Both share the same 28-pin UQFN package and peripheral set, so upgrading from the PIC16F1782 requires no hardware board changes.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.6000
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.6000$0.60
pcs
Unit price: $0.6000 · Total: $0.60

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany