PIC16F1615-I/P Microchip Integrated Circuit (Dual-In-Line Packages) In Stock
Microchip PIC16F1615-I/P is an 8-bit PIC16 microcontroller with 14 KB Flash, integrated ADC and DAC channels, and up to 32 MHz clock in a 14-pin PDIP package operating from 2.3 V. Combines analog and digital peripherals in a breadboard-friendly through-hole package ideal for prototyping and low-pin-count embedded designs. In stock worldwide for rapid development of sensor-interface and signal-conditioning applications.
- Manufacturer
- Microchip
- Package
- Dual-In-Line Packages
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- PIC16F1615-I/P Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.4000(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 14 KB Flash with up to 32 MHz clock and 2.3 V minimum supply enables compact embedded control with nanoWatt XLP power modes in an 8-bit architecture
- Integrated ADC and DAC channels on a single chip support mixed-signal sensor conditioning and analog output generation without external converter ICs
- 14-pin PDIP through-hole package is breadboard-compatible for rapid prototyping and small-volume production of space-constrained embedded designs
Applications
The PIC16F1615-I/P is suited for low-pin-count sensor interface designs such as thermostat controllers, LED dimmer circuits, and analog signal conditioners where the on-chip ADC and DAC eliminate external converter components. Its 2.3 V minimum supply and nanoWatt XLP sleep modes make it a good fit for coin-cell or AAA battery-powered wireless sensor nodes and remote alarm systems. The 14-pin PDIP package allows rapid prototyping on standard breadboards and is ideal for small production runs of industrial and consumer embedded control boards.
Specifications
| Manufacturer Package Code | PDIP-14 |
| Factory Lead Time | 6Weeks |
| YTEOL | 13 |
| Has ADC | YES |
| Additional Feature | OPERATES AT 2.3 V MINIMUM SUPPLY AT 16 MHz |
| Bit Size | 8 |
| Boundary Scan | NO |
| CPU Family | PIC16 |
| Clock Frequency-Max | 32MHz |
| DAC Channels | YES |
| DMA Channels | NO |
| Format | FIXED POINT |
| Integrated Cache | NO |
| JESD-30 Code | R-PDIP-T14 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| Number of External Interrupts | 1 |
| Number of I/O Lines | 12 |
| Number of Serial I/Os | 1 |
| Number of Timers | 11 |
| On Chip Data RAM Width | 8 |
| On Chip Program ROM Width | 8 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP14,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Qualification Status | Not Qualified |
| RAM (bytes) | 1024 |
| ROM (words) | 14336 |
| ROM Programmability | FLASH |
| Speed | 32MHz |
| Supply Current-Max | 6mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 3V |
| Supply Voltage-Nom | 3V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| ## PIC16F1615-I/P Alternates Showing results | Image |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for PIC16F1615-I/P:
suggested
suggested
suggested
suggested
suggested
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDIP14
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDIP14
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDIP14
14KB Flash, 1KB RAM, 10bit DAC, Op Amp, ZCD, PRG, 100mA I/Os, PPS, 10/16-bit
7KB Flash, 512 RAM, 12 I/O, 32MHz Int. Osc, 10-bit ADC, ZCD, WWDT, CRC
7KB Flash, 512B RAM, 10-bit ADC, Comp, OpAmp, MSSP, EUSART, 8-bit/5-bit DAC
RISC Microcontroller, 8-Bit, FLASH, PIC CPU, 32MHz, CMOS, PDIP14
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDIP14
Frequently Asked Questions
What is the maximum clock frequency of PIC16F1615-I/P and at what supply voltage can it run at 32 MHz?
The PIC16F1615-I/P supports a maximum clock frequency of 32 MHz. It can operate at 16 MHz from a 2.3 V minimum supply, and reaches the full 32 MHz at higher supply voltages between 2.7 V and 5.5 V. This voltage-frequency scaling gives designers the option to run at reduced speed from a low-voltage supply such as two AA batteries to extend battery life in portable sensor applications.
Does PIC16F1615-I/P include both ADC and DAC peripherals for mixed-signal designs?
Yes, the PIC16F1615-I/P integrates both an ADC and a DAC channel on-chip. The ADC supports multiple analog input channels for reading sensors, while the built-in DAC enables generation of analog reference or control output voltages without adding an external DAC IC. This mixed-signal combination in a single 14-pin PDIP reduces BOM cost and board space in signal-conditioning applications such as motor speed setpoint controllers and sensor calibration circuits.
How does the 14-pin PDIP package of PIC16F1615-I/P benefit prototyping and small-volume production compared to surface mount packages?
The 14-pin PDIP (0.300" row spacing, 0.1" pin pitch) of PIC16F1615-I/P is directly insertable into standard breadboards and DIP sockets without soldering, enabling rapid hardware prototyping and in-circuit reprogramming without SMT rework tools. For small-volume production of 10–500 units, through-hole wave soldering or hand assembly is simpler and less costly than SMT stencil printing, making the PDIP the preferred choice for low-volume industrial controllers and educational kits.
Is PIC16F1615-I/P a drop-in upgrade from PIC16F684 for designs needing more Flash memory?
The PIC16F1615-I/P offers 14 KB Flash compared to the PIC16F684's 3.5 KB Flash in the same 14-pin PDIP footprint, providing 4x more program storage. Pin mappings differ, so firmware porting is required, but the physical package and 2.3 V to 5.5 V operating voltage range are compatible. The PIC16F1615 also adds a DAC and more ADC channels absent in the PIC16F684, making it a functional superset for designs requiring more code space or on-chip analog output at up to 32 MHz.
Related Guides
How to Choose a 3528 SMD Indicator LED for Blue Status Lighting: Selection Guide
A practical 3528 SMD indicator LED selection guide using 150141BS73100 and related Wurth 150141 variants for blue status lighting.
Jul 5, 2026
BAS70KFILM Design Guide for Low-Leakage Signal Clamping and RF Detector Inputs
Practical BAS70KFILM design guidance for signal clamps, RF detector inputs, leakage control, capacitance, layout, and sourcing alternatives.
Jul 5, 2026
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.4000 | $0.40 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”