PIC16F15214-I/MF Microchip Integrated Circuit (Small Outline No-lead) In Stock
The PIC16F15214-I/MF is an 8-bit PIC microcontroller from Microchip running at up to 32 MHz from a 1.8 V to 5.5 V supply, housed in a compact 8-pin DFN package. It integrates an ADC, multiple peripherals, and operates as low as 1.8 V at 16 MHz, targeting ultra-compact IoT sensor nodes and low-power embedded control applications.
- Manufacturer
- Microchip
- Package
- Small Outline No-lead
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- PIC16F15214-I/MF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.3700(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Up to 32 MHz CPU clock in an 8-bit PIC16 core with low 1.8 V minimum operating voltage at 16 MHz for battery-powered designs
- Integrated ADC enables direct sensor signal digitization without external converter components
- Ultra-compact DFN-8 package (Microchip MF suffix) fits the smallest PCB footprints in space-constrained IoT and wearable applications
- Wide supply range of 1.8 V to 5.5 V accommodates single-cell lithium, two-cell AA, and regulated 3.3 V/5 V systems
- PIC16 architecture with rich on-chip peripheral set reduces external component count and simplifies firmware development with MPLAB ecosystem tools
Applications
The PIC16F15214-I/MF is designed for ultra-compact embedded control and IoT sensing applications where minimal pin count, low supply voltage, and small package size are the primary constraints. Its 1.8 V minimum operation at 16 MHz makes it well-suited for coin-cell and single-cell lithium battery-powered sensor nodes, smart home accessories, and low-cost industrial control peripherals. The built-in ADC allows direct connection to resistive sensors, light sensors, and temperature transducers without an external ADC IC.
Specifications
| Manufacturer Package Code | DFN-8 |
| Factory Lead Time | 1Week |
| Date Of Intro | 2020-09-01 |
| YTEOL | 19 |
| Has ADC | YES |
| Additional Feature | OPERATES AT 1.8V MIN @ 16 MHZ |
| Bit Size | 8 |
| Boundary Scan | NO |
| CPU Family | PIC16 |
| Clock Frequency-Max | 32MHz |
| DAC Channels | NO |
| DMA Channels | NO |
| Format | FIXED POINT |
| Integrated Cache | NO |
| JESD-30 Code | S-PDSO-N8 |
| JESD-609 Code | e3 |
| Low Power Mode | YES |
| Number of External Interrupts | 1 |
| Number of I/O Lines | 6 |
| Number of Serial I/Os | 1 |
| Number of Timers | 4 |
| On Chip Data RAM Width | 8 |
| On Chip Program ROM Width | 8 |
| PWM Channels | YES |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC8,.12,25 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| RAM (bytes) | 512 |
| RAM (words) | 512 |
| ROM (words) | 7168 |
| ROM Programmability | FLASH |
| Speed | 32MHz |
| Supply Current-Max | 3.6mA |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 2.5V |
| Supply Voltage-Nom | 3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| ## PIC16F15214-I/MF Alternates Showing results | Image |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.31.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for PIC16F15214-I/MF:
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO8
suggested
suggested
suggested
suggested
suggested
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO8
RISC Microcontroller, 8-Bit, FLASH, PIC16 CPU, 32MHz, CMOS, PDSO8
Frequently Asked Questions
What is the maximum clock frequency of the PIC16F15214-I/MF, and at what supply voltage can it run full speed?
The PIC16F15214-I/MF supports a maximum CPU clock of 32 MHz. At 16 MHz, the device operates down to a supply voltage of 1.8 V, enabling battery-powered designs. Full-speed 32 MHz operation requires a higher supply voltage, typically 2.3 V or above, as specified in the datasheet power-versus-frequency curves for the PIC16F152xx family.
Which analog peripherals does the PIC16F15214-I/MF integrate to reduce external component count?
The PIC16F15214-I/MF includes a built-in ADC, allowing direct digitization of analog sensor outputs such as thermistors, LDRs, or potentiometers without an external converter IC. This on-chip integration is particularly valuable in the 8-pin DFN package where every pin must serve multiple roles, and adding an external ADC would consume additional I/O lines, board area, and BOM cost.
How does the 8-pin DFN package of the PIC16F15214-I/MF compare to DIP and SOIC options for compact product designs?
The DFN-8 package used by the PIC16F15214-I/MF occupies approximately 2 mm × 3 mm of PCB area, roughly 4× smaller than an 8-pin SOIC and 10× smaller than an 8-pin DIP. For wearable devices, smart tags, and miniature sensor boards where total PCB area may be under 100 mm², the DFN-8 footprint allows the microcontroller to fit alongside a coin-cell battery holder and a few passive components.
When is the PIC16F15214-I/MF a suitable alternative to the PIC12F1572 in low-pin-count embedded designs?
The PIC16F15214-I/MF is appropriate as an upgrade over the PIC12F1572 when a design requires an ADC channel in addition to PWM and timer peripherals, or when the 1.8 V minimum supply and 32 MHz maximum clock of the PIC16F152xx family better match the power budget. Both parts share an 8-pin DFN-compatible footprint, so the board layout change is minimal and the firmware can be migrated using the same MPLAB X toolchain.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.5000 | $0.50 |
| 3+ | $0.4880 | $1.46 |
| 25+ | $0.4580 | $11.45 |
| 100+ | $0.4200 | $42.00 |
| 1000+ | $0.3800 | $380.00 |
| 5000+ | $0.3700 | $1850.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”