PIC12F508-I/P Microchip Integrated Circuit (Dual-In-Line Packages) In Stock

8-bit PIC12 microcontroller with 512 words of flash, 25 bytes RAM, and 4 MHz maximum clock in a through-hole 8-pin PDIP package. Integrates 4 I/O pins, an internal oscillator, and ADC for simple sensor and control tasks. Lead-free and breadboard-friendly for prototyping and low-cost production.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
PIC12F508-I/PDual-In-Line Packages
Quick Facts
Manufacturer
Microchip
Package
Dual-In-Line Packages
Pin Count
8
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.5800(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 512-word OTP/flash program memory and 25 bytes RAM in a minimal 8-pin PDIP footprint for simple control tasks
  • Internal 4 MHz oscillator eliminates external crystal, reducing BOM cost and PCB area to a bare minimum
  • On-chip ADC input channels allowing direct analog sensor reading without external converter components
  • 5 V tolerant I/O and wide supply range enabling direct interfacing with legacy TTL and CMOS logic signals

Applications

The PIC12F508-I/P suits simple one-time programmed or flash-based control tasks such as LED blinking sequences, relay timers, and switch debounce logic where an 8-pin DIP MCU is more cost-effective than a larger device. Its breadboard-compatible PDIP package makes it popular in educational electronics kits and hobbyist prototypes that require a minimal programmable controller. The device also appears in low-cost consumer appliances and toy controllers where production volumes justify its straightforward programming model and minimal external component count.

Specifications

Pbfree CodeYes
Manufacturer Package CodePDIP-8
Factory Lead Time8Weeks
YTEOL9
Has ADCYES
Bit Size8
Boundary ScanYES
CPU FamilyPIC12
Clock Frequency-Max4MHz
DAC ChannelsNO
DMA ChannelsNO
JESD-30 CodeR-PDIP-T8
JESD-609 Codee3
Number of I/O Lines6
On Chip Program ROM Width8
PWM ChannelsNO
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeDIP8,.3
Package ShapeRECTANGULAR
Package StyleIN-LINE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (bytes)25
ROM (words)768
ROM ProgrammabilityFLASH
Speed4MHz
Supply Voltage-Max5.5V
Supply Voltage-Min5V
Supply Voltage-Nom5V
Surface MountNO
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormTHROUGH-HOLE
Terminal Pitch2.54mm
Terminal PositionDUAL
uPs/uCs/Peripheral ICs TypeMICROCONTROLLER, RISC
PackageDual-In-Line Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
ECCNEAR99
HTS Code8542.31.00.01
Country of OriginThailand

Datasheet

PIC12F508-I/P Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for PIC12F508-I/P:

PIC12F509-E/PMicrochip Technology Inc

RISC Microcontroller, 8-Bit, FLASH, PIC12 CPU, 4MHz, CMOS, PDIP8

View Part →

Frequently Asked Questions

How much program memory and RAM does the PIC12F508-I/P provide, and are those resources sufficient for a simple timer application?

The PIC12F508-I/P has 512 words of program memory and 25 bytes of RAM. For a simple countdown timer or LED sequencer, 512 words is typically more than enough to hold the full application code in PIC assembly or C with compact optimization. The 25 bytes of RAM covers local variables and a small state machine without requiring external memory, making this device cost-effective for single-function appliance timers and decorative lighting controllers.

Can the PIC12F508-I/P run without an external crystal oscillator, and what clock frequency does it provide internally?

Yes, the PIC12F508-I/P includes an internal RC oscillator running at approximately 4 MHz, so no external crystal, resonator, or clock source is required. This reduces external component count to zero for timing-insensitive applications such as debounce filters or one-shot timers. The internal oscillator accuracy is sufficient for applications where timing tolerance of a few percent is acceptable, which covers most simple industrial sensor and control tasks.

For a student learning embedded programming, what advantages does the PIC12F508-I/P's 8-pin PDIP package offer over modern SMD MCUs?

The 0.3-inch 8-pin PDIP package of the PIC12F508-I/P fits directly into a standard breadboard with 0.1-inch pin spacing, allowing students to prototype circuits without soldering. It can be programmed in-circuit using an inexpensive PICkit programmer, with code development in MPLAB X IDE which is freely available. The 5 V operating voltage and DIP form factor also make it compatible with decades of existing PIC12 tutorials, circuit diagrams, and component kits.

What I/O count does the PIC12F508-I/P offer and how does pin multiplexing affect available peripheral combinations?

The PIC12F508-I/P provides 6 general-purpose I/O pins in total, with 4 of those available as both digital I/O and ADC inputs. One pin is input-only and another is shared with the MCLR reset function. This means practical designs get 4 digital outputs for driving LEDs or relays plus up to 4 analog inputs simultaneously, which is adequate for small sensor-to-actuator control loops reading 2 analog sensors and driving 2 output signals within the 8-pin constraint.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.5800
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.5800$0.58
pcs
Unit price: $0.5800 · Total: $0.58

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany