PIC10F200-I/PG Microchip Integrated Circuit (Dual-In-Line Packages) In Stock
Microchip PIC10F200-I/PG is an 8-bit PIC10 microcontroller with 384 bytes of Flash program memory, 16 bytes of RAM, 4 I/O pins, and a 4 MHz internal clock, housed in an 8-pin PDIP package for ultra-compact, low-cost embedded control applications.
- Manufacturer
- Microchip
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- PIC10F200-I/PG Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 384 bytes of Flash program memory and 16 bytes of RAM in an 8-pin PDIP package deliver a minimal-footprint 8-bit MCU solution for simple logic replacement and dedicated sensor interface designs
- Internal 4 MHz RC oscillator eliminates the need for an external crystal, reducing BOM cost and simplifying PCB layout for cost-sensitive high-volume applications
- 4 configurable I/O pins operating at 2.0 V to 5.5 V supply voltage allow direct interfacing with both 3.3 V and 5 V peripheral signals without level shifters in compact embedded designs
Applications
The PIC10F200-I/PG is ideal for battery-powered sensor nodes, LED dimmer controls, and simple logic-replacement applications where only 4 I/O pins and minimal code space are needed, allowing the MCU to fit in an 8-pin through-hole footprint. Its 2.0 V to 5.5 V supply range and 4 MHz internal oscillator make it suitable for coin-cell powered wireless sensor tags, toy electronics, and low-frequency PWM controllers without requiring external timing components. The industrial temperature range of -40°C to +85°C extends its use to outdoor environmental sensors and HVAC accessory controllers.
Specifications
| YTEOL | 6 |
| Has ADC | NO |
| Bit Size | 8 |
| Boundary Scan | NO |
| CPU Family | PIC10 |
| Clock Frequency-Max | 4MHz |
| DAC Channels | NO |
| DMA Channels | NO |
| Format | FIXED POINT |
| Integrated Cache | NO |
| JESD-30 Code | R-PDIP-T8 |
| Low Power Mode | NO |
| Number of I/O Lines | 4 |
| Number of Timers | 1 |
| On Chip Data RAM Width | 8 |
| On Chip Program ROM Width | 8 |
| PWM Channels | NO |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| RAM (bytes) | 16 |
| RAM (words) | 16 |
| ROM (words) | 384 |
| ROM Programmability | FLASH |
| Speed | 4MHz |
| Supply Voltage-Max | 5.5V |
| Supply Voltage-Min | 5V |
| Supply Voltage-Nom | 5V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| HTS Code | 8542.31.00.15 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for PIC10F200-I/PG:
RISC Microcontroller, 8-Bit, FLASH, PIC10 CPU, 4MHz, CMOS, PDIP8
RISC Microcontroller, 8-Bit, FLASH, PIC10 CPU, 4MHz, CMOS, PDIP8
RISC Microcontroller, 8-Bit, FLASH, PIC10 CPU, 4MHz, CMOS, PDIP8
RISC Microcontroller, 8-Bit, FLASH, PIC10 CPU, 4MHz, CMOS, PDSO6
Frequently Asked Questions
How much program memory and RAM does the PIC10F200-I/PG provide, and what size firmware can it run?
The PIC10F200-I/PG has 384 bytes (256 12-bit words) of Flash program memory and 16 bytes of data RAM. This supports small dedicated control routines of up to approximately 200 assembly instructions or a minimal C function, sufficient for LED control, button debounce logic, or simple sensor threshold detection at a 4 MHz clock with a 1 microsecond instruction cycle.
How many I/O pins does the PIC10F200-I/PG offer, and at what voltage levels can they operate?
The PIC10F200-I/PG provides 4 bidirectional I/O pins that operate across a supply voltage range of 2.0 V to 5.5 V, making them directly compatible with both 3.3 V microcontroller interfaces and legacy 5 V logic without external level shifters. Each pin can source or sink up to 25 mA, enabling direct LED drive at up to 20 mA per pin.
When is the PIC10F200-I/PG a better choice than a larger 18-pin PIC16F device for a new design?
The PIC10F200-I/PG is preferred when the design requires only 4 I/O pins, minimal flash (under 400 bytes), and the smallest possible PCB footprint, since the 8-pin PDIP body measures 9.9 x 6.2 mm versus the 18-pin DIP at 22.9 mm. At high production volumes, the PIC10F200 typically costs 30 to 50 percent less per unit than a PIC16F device, making it the economically optimal choice for dedicated LED driver, button scanner, or power-on delay timer functions.
Does the PIC10F200-I/PG require an external crystal or resonator for the clock?
No, the PIC10F200-I/PG includes an integrated 4 MHz RC oscillator, allowing operation without any external crystal, resonator, or clock capacitors. This eliminates 2 passive components and reduces PCB land area by approximately 5 mm² per oscillator pair, which is significant in the compact 8-pin PDIP footprint and lowers BOM cost for high-volume consumer and industrial production runs.
Related Guides
ECMF02-4CMX8 Common-Mode Filter with ESD Protection: Selection Guide
Compare ECMF02-4CMX8 vs ECMF02-2AMX6, ECMF04-4HSM10, and other ST ECMF filters. Choose the right 4-channel common-mode filter with ESD protection for USB 2.0.
Jun 20, 2026
AD5204 Quad Digital Potentiometer Selection Guide (2026)
How to choose the right AD5204 quad digital potentiometer: compare 10kΩ vs 100kΩ variants, TSSOP vs SOIC packages, and SPI interface options for your design.
Jun 20, 2026
0402 10uF X5R Decoupling Design Guide for Compact Digital Rails
Application note for using CL05A106MP5NUNC-class 0402 10uF X5R MLCCs in compact digital rail decoupling designs.
Jun 19, 2026
How to Choose an 0805 10uF MLCC for Decoupling and Bulk Capacitance
Selection guide for choosing 0805 10uF MLCCs around CL21A106KOQNNNE, covering derating, dielectric, package, and sourcing checks.
Jun 19, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
PIC16LF88-I/SS
Small Outline Packages
Integrated Circuit
25AA02E48-I/SN
Small Outline Packages
Integrated Circuit
PIC18F1220-I/SO
Small Outline Packages
Integrated Circuit
MIC5319-1.8YD5-TR
SOT23 (5-Pin)
Integrated Circuit
dsPIC33FJ256GP710A-I/PT
Quad Flat Packages
Integrated Circuit
BM70BLES1FC2-0B03AA
Other
Integrated Circuit
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.”