PCF8574ADW Texas Instruments In Stock

The PCF8574ADW is a electronic component from Texas Instruments, available for purchase on FindMyChip with competitive pricing and worldwide shipping.

Verified May 2026
Package / Visual Reference
PCF8574ADWIC Package
Quick Facts
Manufacturer
Texas Instruments
Package
Lifecycle
Datasheet
N/A
Price
From $0.9750(MOQ 1)
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Specifications

Supply Voltage2.5–6V
I2C Bus Speed400kHz
I/O Ports8
Interrupt OutputActive-low /INT
Standby Current10μA
Operating Temperature-40 to +85°C
PackageSOIC-20W
InterfaceI2C

Alternate & Equivalent Parts

Compatible alternatives and drop-in replacements for PCF8574ADW:

PCF8574ADWRTexas Instruments

Tape-and-reel packaging variant of PCF8574ADW; identical electrical specs, same footprint, drop-in replacement for high-volume SMT assembly

View Part →
PCF8574ANNXP Semiconductors

NXP equivalent 8-bit I2C I/O expander with matching I2C address range (0x38–0x3F), same pin count and function, compatible firmware driver

View Part →

Frequently Asked Questions

How many PCF8574ADW devices can share a single I2C bus?

Up to 8 PCF8574ADW devices can coexist on one I2C bus. Each device has three hardware address pins (A0, A1, A2) that set its 7-bit address, giving 8 unique addresses (0x38–0x3F). For designs needing more than 64 I/O lines, the PCF8574A (0x70–0x77 range) can be combined on the same bus for a total of 16 expanders and 128 I/O pins.

Supply voltage compatibility: does PCF8574ADW work at 3.3V and 5V?

Yes. PCF8574ADW operates from 2.5V to 6V, making it fully compatible with both 3.3V (ARM Cortex-M, ESP32) and 5V (ATmega, classic Arduino) systems. The I2C lines must not exceed VCC; if your MCU runs at 3.3V but the expander is powered at 5V, use a level shifter on SDA/SCL to avoid latch-up.

How does the /INT interrupt pin work on PCF8574ADW?

The /INT pin goes low whenever any of the 8 I/O lines changes state (input toggles). The host MCU detects this falling edge via a GPIO interrupt, then reads the I2C port register to identify which pin changed. This eliminates polling, reducing bus traffic and CPU load — especially useful in battery-powered IoT nodes where the MCU can sleep between events.

Minimum order and lead time for PCF8574ADW

PCF8574ADW is available with MOQ 1 unit. Standard pricing starts at $2.00 for 1 piece, dropping to $0.975 for 15+ pieces. Lead time is typically within 2 weeks for stocked quantities; for large orders (1000+) contact us for a dedicated quote and expedited sourcing.

Compatible alternatives to PCF8574ADW for design-in

Pin-compatible alternatives include the PCF8574ADWR (tape-and-reel variant), NXP PCF8574A (identical functionality, same I2C address range 0x38–0x3F), and the MCP23008 (Microchip, 18-pin DIP/SOIC, 1.8–5.5V, additional features). For higher channel counts, consider the PCF8575 (16-bit expander, I2C) or MCP23017 (16-bit, I2C, interrupt per bank).

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
From $0.9750
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$2.0000$2.00
4+$1.5000$6.00
14+$1.0000$14.00
15+$0.9750$14.63
pcs
Unit price: $2.0000 · Total: $2.00

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany