MSP430P325IPM Texas Instruments Integrated Circuit (Quad Flat Packages) In Stock

The MSP430P325IPM is a 16-bit ultra-low-power microcontroller from Texas Instruments featuring 16 KB OTP memory, integrated ADC, and 3.3 MHz maximum clock in a 64-pin LQFP package. It targets battery-powered meters and portable instruments requiring long field life.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MSP430P325IPMQuad Flat Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Quad Flat Packages
Pin Count
64
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of MSP430P325IPM?

  • 16-bit MSP430 CPU core with ultra-low-power standby modes down to sub-µA supply current for multi-year battery life
  • 16 KB one-time-programmable (OTP) Flash memory for secure, tamper-resistant code storage in field meters
  • Integrated ADC for direct analog sensor digitization without external converter ICs
  • 64-pin LQFP package with boundary-scan (JTAG) for in-system programming and production testing

What is MSP430P325IPM used for?

The MSP430P325IPM is purpose-built for smart metering, flow measurement, and portable medical devices where extremely low current consumption is critical for multi-year battery operation. Its 16-bit arithmetic core handles fixed-point meter calculations accurately at 3.3 MHz while waking from low-power mode in under 6 µs. The 64-pin LQFP package provides sufficient I/O lines for LCD segment drivers, communication interfaces, and analog sensor inputs in a single-chip meter solution.

What are the specifications of MSP430P325IPM?

Pbfree CodeNo
YTEOL0
Has ADCYES
Bit Size16
Boundary ScanYES
Clock Frequency-Max3.3MHz
DAC ChannelsNO
DMA ChannelsNO
JESD-30 CodeS-PQFP-G64
JESD-609 Codee4
Number of I/O Lines14
On Chip Program ROM Width8
PWM ChannelsNO
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeQFP64,.47SQ,20
Package ShapeSQUARE
Package StyleFLATPACK, LOW PROFILE, FINE PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
RAM (bytes)512
ROM (words)16384
ROM ProgrammabilityOTPROM
Speed3.3MHz
Supply Voltage-Max5.5V
Supply Voltage-Min5V
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)30
uPs/uCs/Peripheral ICs TypeMICROCONTROLLER, RISC
PackageQuad Flat Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 3
HTS Code8542.31.00.20

Where can I find the MSP430P325IPM datasheet?

MSP430P325IPM Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for MSP430P325IPM?

Compatible alternatives and drop-in replacements for MSP430P325IPM:

MSP430P325IPGTexas Instruments

RISC Microcontroller, 16-Bit, OTPROM, 3.3MHz, CMOS, PQFP64

View Part →
MSP430P325AIPGTexas Instruments

RISC Microcontroller, 16-Bit, OTPROM, 3.3MHz, CMOS, PQFP64

View Part →

Frequently Asked Questions

What type of program memory does the MSP430P325IPM use and why is it chosen for metering products?

The MSP430P325IPM uses 16 KB of OTP (one-time-programmable) memory rather than re-programmable Flash, which provides a cost advantage in high-volume meter production. OTP memory cannot be altered after programming, making it resistant to accidental code corruption or tampering in revenue-grade meters. The 16 KB capacity is sufficient for a complete metrology algorithm, calibration coefficients, and communication stack in a compact 64-pin LQFP package.

How does the MSP430P325IPM's low-power architecture extend battery life in portable instruments?

The MSP430 family achieves standby current in the range of 0.1 µA to 1 µA in its deepest sleep modes, allowing a small 3 V lithium coin cell to last over 10 years when the device wakes periodically to take a 12-bit ADC measurement. The MSP430P325IPM's ability to wake in under 6 µs means the duty cycle can be extremely low, minimizing active-mode consumption which typically runs at less than 1 mA at 3.3 MHz.

When should a designer select the MSP430P325IPM over a reprogrammable MSP430 variant for a meter application?

The MSP430P325IPM is the right choice when firmware is fully validated before production and the application requires 16 KB of code storage, since OTP variants cost less per unit than Flash-based MCUs at quantities above 10,000 pieces. If the design needs firmware updates in the field or multiple firmware versions during development, the MSP430F325 with 16 KB in-system-programmable Flash is a pin-compatible alternative. Both share the same 64-pin LQFP footprint, so PCB layout is identical.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea