ML-40-S1BYF-2PAlternatives & Equivalent Parts
About ML-40-S1BYF-2P
ML-40-S1BYF-2P is a Connector component manufactured by Sato Parts. It comes in a Other package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 6 alternatives for ML-40-S1BYF-2P — response within 24 hours.
Specification Comparison
| Parameter | ML-40-S1BYF-2PSource | ECA1CM471 | M20-9993645 | SB530-E3/54 | ML-50-S1BYF-2P | STPS1L30A | CL21A476MQYNNNG |
|---|---|---|---|---|---|---|---|
| Manufacturer | Sato Parts | Panasonic | Harwin | Vishay | Sato Parts | STMicroelectronics | Samsung Electro-Mechanics |
| Package Type | Other | Capacitor, Polarized Radial Diameter | Header, Vertical | Diodes, Axial Diameter Horizontal Mounting | Other | Diodes Moulded | Capacitor Chip Non-polarised |
| Pin Count | 2 | 2 | 36 | 2 | 2 | 2 | 2 |
| Temperature Range | — | -40.0°C ~ 85.0°C | -40.0°C ~ 105.0°C | -65.0°C ~ 150.0°C | — | ~ 150.0°C | -55.0°C ~ 85.0°C |
| Price | $0.5729 | $0.0750 | $0.7390 | $0.2350 | $0.9895 | $0.0436 | $0.0387 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||||
| Additional Feature | STANDARD: UL 94V-0, POLYBUTYLENE TEREPHTHALATE | — | ROHS COMPLIANT | FREE WHEELING DIODE | STANDARD: UL 94V-0, POLYBUTYLENE TEREPHTHALATE | — | — |
| Fastening Method | SCREW | — | — | — | SCREW | — | — |
| Mounting Type | BOARD | — | BOARD | — | BOARD | — | — |
| Number of Decks | 1 | — | — | — | 1 | — | — |
| Number of Rows | 1 | — | — | — | 1 | — | — |
| Number of Ways | 2 | — | — | — | 2 | — | — |
| Rated Current | 10 A | — | — | — | 15 A | — | — |
| Rated Voltage | 250 V | — | — | — | 250 V | — | — |
| Safety Approval | CSA; UL | — | — | — | UL | — | — |
| Terminal and Terminal Block Type | BARRIER STRIP TERMINAL BLOCK | — | — | — | BARRIER STRIP TERMINAL BLOCK | — | — |
| Pbfree Code | — | Yes | Yes | — | — | — | Yes |
| Reach Compliance Code | — | Compliant | — | — | — | — | Compliant |
| Factory Lead Time | — | 18 Weeks, 2 Days | — | — | — | 15 Weeks | 20 Weeks |
| YTEOL | — | 6 | 9.1 | 5.95 | — | 4 | 7.71 |
| Capacitance | — | 470 µF | — | — | — | — | 47 µF |
| Capacitor Type | — | ALUMINUM ELECTROLYTIC CAPACITOR | — | — | — | — | CERAMIC CAPACITOR |
| Diameter | — | 8 mm | — | — | — | — | — |
| Dielectric Material | — | ALUMINUM (WET) | — | — | — | — | CERAMIC |
| JESD-609 Code | — | e3 | e4 | e3 | — | e3 | e3 |
| Leakage Current | — | 0.0752 mA | — | — | — | — | — |
| Mounting Feature | — | THROUGH HOLE MOUNT | — | — | — | — | SURFACE MOUNT |
| Negative Tolerance | — | 20% | — | — | — | — | 20% |
| Package Shape | — | CYLINDRICAL PACKAGE | — | ROUND | — | RECTANGULAR | RECTANGULAR PACKAGE |
| Package Style | — | Radial | — | LONG FORM | — | SMALL OUTLINE | SMT |
| Packing Method | — | BULK | — | — | — | — | TR, EMBOSSED PLASTIC, 7 INCH |
| Polarity | — | POLARIZED | — | — | — | — | — |
| Positive Tolerance | — | 20% | — | — | — | — | 20% |
| Rated (DC) Voltage (URdc) | — | 16 V | — | — | — | — | 6.3 V |
| Ripple Current | — | 440 mA | — | — | — | — | — |
| Surface Mount | — | NO | — | NO | — | YES | YES |
| Tan Delta | — | 0.2 | — | — | — | — | — |
| Terminal Finish | — | Tin (Sn) | — | Matte Tin (Sn) | — | Matte Tin (Sn) - annealed | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Terminal Pitch | — | 3.5 mm | 2.54 mm | — | — | — | — |
| Terminal Shape | — | WIRE | — | — | — | — | WRAPAROUND |
| Body Breadth | — | — | 0.1 inch | — | — | — | — |
| Body Depth | — | — | 0.1 inch | — | — | — | — |
| Body Length | — | — | 3.6 inch | — | — | — | — |
| Body/Shell Style | — | — | RECEPTACLE | — | — | — | — |
| Connector Type | — | — | BOARD CONNECTOR | — | — | — | — |
| Contact Finish Mating | — | — | NOT APPLICABLE | — | — | — | — |
| Contact Finish Termination | — | — | Gold (Au) | — | — | — | — |
| Contact Gender | — | — | MALE | — | — | — | — |
| Contact Material | — | — | BRASS | — | — | — | — |
| Contact Pattern | — | — | RECTANGULAR | — | — | — | — |
| Contact Resistance | — | — | 25 mΩ | — | — | — | — |
| DIN Conformance | — | — | NO | — | — | — | — |
| Dielectric Withstanding Voltage | — | — | 750VAC V | — | — | — | — |
| Durability | — | — | 300 Cycles | — | — | — | — |
| Filter Feature | — | — | NO | — | — | — | — |
| IEC Conformance | — | — | NO | — | — | — | — |
| Insulation Resistance | — | — | 1000000000 Ω | — | — | — | — |
| Insulator Color | — | — | BLACK | — | — | — | — |
| Insulator Material | — | — | POLYAMIDE | — | — | — | — |
| MIL Conformance | — | — | NO | — | — | — | — |
| Mating Contact Pitch | — | — | 0.1 inch | — | — | — | — |
| Mixed Contacts | — | — | NO | — | — | — | — |
| Mounting Option 1 | — | — | LOCKING | — | — | — | — |
| Mounting Style | — | — | STRAIGHT | — | — | — | — |
| Number Of Connectors | — | — | ONE | — | — | — | — |
| Number Of PCB Rows | — | — | 1 | — | — | — | — |
| Number of Rows Loaded | — | — | 1 | — | — | — | — |
| Option | — | — | GENERAL PURPOSE | — | — | — | — |
| Rated Current (Signal) | — | — | 3 A | — | — | — | — |
| Reference Standard | — | — | UL | — | — | — | — |
| Terminal Length | — | — | 0.118 inch | — | — | — | — |
| Termination Type | — | — | SOLDER | — | — | — | — |
| Total Number of Contacts | — | — | 36 | — | — | — | — |
| UL Flammability Code | — | — | 94V-0 | — | — | — | — |
| Application | — | — | — | FAST RECOVERY | — | POWER | — |
| Case Connection | — | — | — | ISOLATED | — | — | — |
| Configuration | — | — | — | SINGLE | — | SINGLE | — |
| Diode Element Material | — | — | — | SILICON | — | SILICON | — |
| Diode Type | — | — | — | RECTIFIER DIODE | — | RECTIFIER DIODE | — |
| Forward Voltage-Max (VF) | — | — | — | 0.48 V | — | 0.445 V | — |
| JEDEC-95 Code | — | — | — | DO-201AD | — | — | — |
| JESD-30 Code | — | — | — | O-PALF-W2 | — | R-PDSO-C2 | — |
| Non-rep Pk Forward Current-Max | — | — | — | 220 A | — | 75 A | — |
| Number of Elements | — | — | — | 1 | — | 1 | — |
| Number of Phases | — | — | — | 1 | — | 1 | — |
| Output Current-Max | — | — | — | 5 A | — | 1 A | — |
| Package Body Material | — | — | — | PLASTIC/EPOXY | — | PLASTIC/EPOXY | — |
| Qualification Status | — | — | — | Not Qualified | — | Not Qualified | — |
| Rep Pk Reverse Voltage-Max | — | — | — | 30 V | — | 30 V | — |
| Technology | — | — | — | SCHOTTKY | — | SCHOTTKY | — |
| Terminal Form | — | — | — | WIRE | — | C BEND | — |
| Terminal Position | — | — | — | AXIAL | — | DUAL | — |
| Peak Reflow Temperature (Cel) | — | — | — | — | — | 260 | — |
| Reverse Current-Max | — | — | — | — | — | 200 µA | — |
| Reverse Test Voltage | — | — | — | — | — | 30 V | — |
| ## STPS1L30A Alternates Showing results | — | — | — | — | — | Image | — |
| Height | — | — | — | — | — | — | 1.25 mm |
| Multilayer | — | — | — | — | — | — | Yes |
| Size Code | — | — | — | — | — | — | 0805 |
| Temperature Characteristics Code | — | — | — | — | — | — | X5R |
| Temperature Coefficient | — | — | — | — | — | — | 15% ppm/°C |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 6 alternatives for ML-40-S1BYF-2P — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for ML-40-S1BYF-2P is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating ML-40-S1BYF-2P replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for ML-40-S1BYF-2P. Get expert recommendations within 24 hours.
FAQ
What is equivalent to ML-40-S1BYF-2P?
Known equivalents for ML-40-S1BYF-2P include ECA1CM471, M20-9993645, SB530-E3/54. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of ML-40-S1BYF-2P?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify ML-40-S1BYF-2P alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.