MFR-25FTF52-1MAlternatives & Equivalent Parts
About MFR-25FTF52-1M
MFR-25FTF52-1M is a Resistor component manufactured by YAGEO (PHYCOMP). It comes in a Resistors, Axial Diameter Horizontal Mounting package. Below you'll find known alternative and equivalent parts that can serve as replacements in your design.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for MFR-25FTF52-1M — response within 24 hours.
Specification Comparison
| Parameter | MFR-25FTF52-1MSource | CFR-25JB-1K0 | N3429-5302RB | IRL540NPBF | TL082IP |
|---|---|---|---|---|---|
| Manufacturer | YAGEO (PHYCOMP) | YAGEO (PHYCOMP) | 3M | Infineon | Texas Instruments |
| Package Type | Resistors, Axial Diameter Horizontal Mounting | Resistors, Axial Diameter Horizontal Mounting | Other | Transistor Outline, Vertical | Dual-In-Line Packages |
| Pin Count | 2 | 2 | 26 | 3 | 8 |
| Temperature Range | -55.0°C ~ 155.0°C | — | ~ 130.0°C | ~ 175.0°C | -40.0°C ~ 85.0°C |
| Price | $0.0120 | $0.0110 | $3.1564 | $0.4717 | $0.3968 |
| Stock | In Stock | In Stock | In Stock | In Stock | In Stock |
| Lifecycle | ACTIVE | — | ACTIVE | ACTIVE | ACTIVE |
| Electrical Parameters | |||||
| Reach Compliance Code | Compliant | — | — | — | — |
| Factory Lead Time | 24 Weeks | — | — | — | — |
| YTEOL | 9 | — | 9.1 | 5 | 15 |
| Construction | Tubular | — | — | — | — |
| JESD-609 Code | e3 | — | e3 | e3 | e4 |
| Lead Diameter | 0.55 mm | — | — | — | — |
| Mounting Feature | THROUGH HOLE MOUNT | — | — | — | — |
| Package Diameter | 2.4 mm | — | — | — | — |
| Package Length | 6.3 mm | — | — | — | — |
| Package Shape | TUBULAR PACKAGE | — | — | RECTANGULAR | RECTANGULAR |
| Package Style | Axial | — | — | FLANGE MOUNT | IN-LINE |
| Packing Method | AMMO PACK | — | — | — | TUBE |
| Rated Power Dissipation (P) | 0.25 W | — | — | — | — |
| Rated Temperature | 70 °C | — | — | — | — |
| Reference Standard | AEC-Q200 | — | UL | — | — |
| Resistance | 1000000 Ω | — | — | — | — |
| Resistor Type | FIXED RESISTOR | — | — | — | — |
| Surface Mount | NO | — | — | NO | NO |
| Technology | METAL FILM | — | — | — | BIPOLAR |
| Temperature Coefficient | 100 ppm/°C | — | — | — | — |
| Terminal Finish | MATTE TIN | — | — | Tin (Sn) | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Shape | WIRE | — | — | — | — |
| Tolerance | 1% | — | — | — | — |
| Working Voltage | 250 V | — | — | — | — |
| ## MFR-25FTF52-1M Alternates Showing results | Image | — | — | — | — |
| Pbfree Code | — | — | Yes | — | Yes |
| Additional Feature | — | — | 3M, LATCHED, POLARIZED | AVALANCHE RATED, HIGH RELIABILITY, LOGIC LEVEL COMPATIBLE | — |
| Board Mounting Option | — | — | HOLE .099-.111 | — | — |
| Body Breadth | — | — | 0.34 inch | — | — |
| Body Depth | — | — | 0.68 inch | — | — |
| Body Length | — | — | 2.06 inch | — | — |
| Connector Type | — | — | BOARD CONNECTOR | — | — |
| Contact Finish Mating | — | — | NOT SPECIFIED | — | — |
| Contact Finish Termination | — | — | Matte Tin (Sn) - with Nickel (Ni) barrier | — | — |
| Contact Gender | — | — | MALE | — | — |
| Contact Material | — | — | NOT SPECIFIED | — | — |
| Contact Pattern | — | — | RECTANGULAR | — | — |
| Contact Style | — | — | SQ PIN-SKT | — | — |
| DIN Conformance | — | — | NO | — | — |
| Dielectric Withstanding Voltage | — | — | 707VAC V | — | — |
| Filter Feature | — | — | NO | — | — |
| IEC Conformance | — | — | NO | — | — |
| Insulation Resistance | — | — | 1000000000 Ω | — | — |
| Insulator Color | — | — | BLACK | — | — |
| Insulator Material | — | — | GLASS FILLED POLYESTER | — | — |
| MIL Conformance | — | — | NO | — | — |
| Mating Contact Pitch | — | — | 0.1 inch | — | — |
| Mating Contact Row Spacing | — | — | 0.1 inch | — | — |
| Mixed Contacts | — | — | NO | — | — |
| Mounting Option 1 | — | — | LATCH & EJECT | — | — |
| Mounting Option 2 | — | — | LOCKING | — | — |
| Mounting Style | — | — | RIGHT ANGLE | — | — |
| Mounting Type | — | — | BOARD | — | — |
| Number Of Connectors | — | — | ONE | — | — |
| Number Of PCB Rows | — | — | 2 | — | — |
| Number of Rows Loaded | — | — | 2 | — | — |
| Option | — | — | GENERAL PURPOSE | — | — |
| PCB Contact Pattern | — | — | RECTANGULAR | — | — |
| PCB Contact Row Spacing | — | — | 2.54 mm | — | — |
| Plating Thickness | — | — | 30u inch | — | — |
| Rated Current (Signal) | — | — | 1 A | — | — |
| Terminal Length | — | — | 0.112 inch | — | — |
| Terminal Pitch | — | — | 2.54 mm | — | 2.54 mm |
| Termination Type | — | — | SOLDER | — | — |
| Total Number of Contacts | — | — | 26 | — | — |
| UL Flammability Code | — | — | 94V-0 | — | — |
| Avalanche Energy Rating (Eas) | — | — | — | 310 mJ | — |
| Case Connection | — | — | — | DRAIN | — |
| Configuration | — | — | — | SINGLE WITH BUILT-IN DIODE | — |
| DS Breakdown Voltage-Min | — | — | — | 100 V | — |
| Drain Current-Max (ID) | — | — | — | 36 A | — |
| Drain-source On Resistance-Max | — | — | — | 0.053 Ω | — |
| FET Technology | — | — | — | METAL-OXIDE SEMICONDUCTOR | — |
| JEDEC-95 Code | — | — | — | TO-220AB | — |
| JESD-30 Code | — | — | — | R-PSFM-T3 | R-PDIP-T8 |
| Number of Elements | — | — | — | 1 | — |
| Operating Mode | — | — | — | ENHANCEMENT MODE | — |
| Package Body Material | — | — | — | PLASTIC/EPOXY | PLASTIC/EPOXY |
| Polarity/Channel Type | — | — | — | N-CHANNEL | — |
| Power Dissipation-Max (Abs) | — | — | — | 94 W | — |
| Pulsed Drain Current-Max (IDM) | — | — | — | 120 A | — |
| Qualification Status | — | — | — | Not Qualified | Not Qualified |
| Terminal Form | — | — | — | THROUGH-HOLE | THROUGH-HOLE |
| Terminal Position | — | — | — | SINGLE | DUAL |
| Transistor Application | — | — | — | SWITCHING | — |
| Transistor Element Material | — | — | — | SILICON | — |
| Amplifier Type | — | — | — | — | OPERATIONAL AMPLIFIER |
| Architecture | — | — | — | — | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | — | — | — | — | 0.02 µA |
| Bias Current-Max (IIB) @25C | — | — | — | — | 0.0002 µA |
| Common-mode Reject Ratio-Min | — | — | — | — | 75 dB |
| Common-mode Reject Ratio-Nom | — | — | — | — | 86 dB |
| Frequency Compensation | — | — | — | — | YES |
| Input Offset Current-Max (IIO) | — | — | — | — | 0.01 µA |
| Input Offset Voltage-Max | — | — | — | — | 6000 µV |
| Low-Bias | — | — | — | — | YES |
| Low-Offset | — | — | — | — | NO |
| Micropower | — | — | — | — | NO |
| Neg Supply Voltage Limit-Max | — | — | — | — | -18 V |
| Neg Supply Voltage-Nom (Vsup) | — | — | — | — | -15 V |
| Number of Functions | — | — | — | — | 2 |
| Package Equivalence Code | — | — | — | — | DIP8,.3 |
| Power | — | — | — | — | NO |
| Programmable Power | — | — | — | — | NO |
| Slew Rate-Min | — | — | — | — | 8 V/us |
| Slew Rate-Nom | — | — | — | — | 13 V/us |
| Subcategory | — | — | — | — | Operational Amplifier |
| Supply Current-Max | — | — | — | — | 5.6 mA |
| Supply Voltage Limit-Max | — | — | — | — | 18 V |
| Supply Voltage-Nom (Vsup) | — | — | — | — | 15 V |
| Temperature Grade | — | — | — | — | INDUSTRIAL |
| Unity Gain BW-Nom | — | — | — | — | 3000 |
| Voltage Gain-Min | — | — | — | — | 25000 |
| Wideband | — | — | — | — | NO |
| ## TL082IP Alternates Showing results | — | — | — | — | Image |
Cells highlighted in yellow indicate differing values across parts. Always verify with official datasheets before substitution.
Need pricing on these alternatives?
Get one quote covering all 4 alternatives for MFR-25FTF52-1M — response within 24 hours.
Quick Links
Why Look for Alternatives?
Finding alternatives for MFR-25FTF52-1M is essential for supply chain resilience. Component shortages, long lead times, and end-of-life notices can disrupt production schedules. Having verified alternative parts ensures your designs remain manufacturable.
When evaluating MFR-25FTF52-1M replacements, consider key parameters such as package compatibility, electrical specifications, and operating temperature range. Our engineering team can help verify pin-to-pin compatibility for your specific application.
Can't Find What You Need?
Our sourcing team can help find compatible alternatives for MFR-25FTF52-1M. Get expert recommendations within 24 hours.
FAQ
What is equivalent to MFR-25FTF52-1M?
Known equivalents for MFR-25FTF52-1M include CFR-25JB-1K0, N3429-5302RB, IRL540NPBF. Contact FindMyChip for a full compatibility analysis for your specific application.
Can I use a different manufacturer's part instead of MFR-25FTF52-1M?
In many cases, yes. Cross-manufacturer alternatives exist for most standard components. However, always verify pin compatibility, electrical specs, and package dimensions before substituting in production.
How do I verify MFR-25FTF52-1M alternatives?
Compare the datasheet specifications including pinout, voltage ratings, timing parameters, and package dimensions. FindMyChip's engineering team can help with compatibility verification — submit an RFQ to get started.