MCP79511-I/MS Microchip Integrated Circuit (Small Outline Packages) In Stock
Microchip MCP79511-I/MS is a real-time clock with 64-byte battery-backed SRAM, SPI interface, and interrupt output in a 10-pin MSOP package. It operates from 1.8 V to 5.5 V supply with a 32.768 kHz crystal oscillator and up to 3 MHz SPI clock at 1.8 V. Ideal for portable and IoT time-keeping designs requiring low-power operation.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- MCP79511-I/MS Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.1100(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- SPI interface real-time clock with 64-byte battery-backed SRAM and interrupt output in 10-pin MSOP package
- Wide supply range from 1.8 V to 5.5 V with 3 MHz SPI clock operation at 1.8 V enabling ultra-low-power designs
- Built-in power-fail detection and automatic battery switchover for uninterrupted timekeeping during main supply outages
Applications
The MCP79511-I/MS is well suited for portable medical devices, IoT sensor nodes, and data loggers that require accurate real-time clock functionality with minimal PCB footprint. Its 64-byte SRAM and interrupt capability make it an efficient companion for microcontrollers in wearable electronics, smart meters, and industrial monitoring systems needing time-stamped event logging.
Specifications
| Manufacturer Package Code | MSOP-10 |
| Factory Lead Time | 6Weeks |
| YTEOL | 13 |
| Additional Feature | ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ |
| Clock Frequency-Max | 0.032MHz |
| Information Access Method | SERIAL(SPI) |
| Interrupt Capability | Y |
| JESD-30 Code | S-PDSO-G10 |
| JESD-609 Code | e3 |
| On Chip Data RAM Width | 8 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP10,.19,20 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| RAM (words) | 64 |
| Screening Level | TS 16949 |
| Supply Current-Max | 5mA |
| Supply Voltage-Max | 3.6V |
| Supply Voltage-Min | 1.8V |
| Supply Voltage-Nom | 3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time-Min | 1/100 SECOND |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Volatile | NO |
| uPs/uCs/Peripheral ICs Type | TIMER, REAL TIME CLOCK |
| ## MCP79511-I/MS Alternates Showing results | Image |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 2 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
Compatible alternatives and drop-in replacements for MCP79511-I/MS:
suggested
Frequently Asked Questions
What SPI clock frequency does MCP79511-I/MS support at 1.8 V supply?
The MCP79511-I/MS supports a maximum SPI clock frequency of 3 MHz when operating from a 1.8 V supply, and up to 10 MHz at higher supply voltages up to 5.5 V. This enables fast register reads and writes in low-power microcontroller systems. The 32.768 kHz crystal oscillator provides accurate timekeeping independently of the SPI clock speed in portable IoT designs.
For which embedded designs is MCP79511-I/MS a strong choice over I2C-based RTCs?
The MCP79511-I/MS with SPI interface is preferred in multi-device SPI bus designs where a single chip-select line simplifies firmware versus address-conflict-prone I2C RTCs. Its 64-byte SRAM stores 64 bytes of user data alongside time registers, and the interrupt output supports wake-on-alarm in battery-powered data loggers operating from 1.8 V to 5.5 V rails.
What is the package and pin count of MCP79511-I/MS and how does it affect board space?
The MCP79511-I/MS uses an MSOP-10 package (10 pins, approximately 3 mm x 3 mm footprint), one of the most compact RTC packages available. This 10-pin small-outline profile makes it suitable for wearable and handheld designs where every square millimeter of PCB area is critical, while still providing SPI, interrupt, battery switchover, and 64-byte SRAM functionality in a single 10-pin chip.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.3900 | $1.39 |
| 50+ | $1.3700 | $68.50 |
| 100+ | $1.2200 | $122.00 |
| 1000+ | $1.1400 | $1140.00 |
| 5000+ | $1.1100 | $5550.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”