MCP79510T-I/MN Microchip Integrated Circuit (Small Outline No-lead) In Stock
Microchip MCP79510T-I/MN is an SPI-interface real-time clock/calendar IC with 1 Kb EEPROM, 64-byte SRAM, and unique ID memory in a compact TDFN-10 package operating from 1.8 V to 5.5 V supply. Features interrupt output and 32.768 kHz oscillator for accurate timekeeping in battery-backed embedded systems. From $0.90 in stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline No-lead
- Pin Count
- 10
- Lifecycle
- ACTIVE
- Datasheet
- MCP79510T-I/MN Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.0400(MOQ 100)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP79510T-I/MN?
- SPI interface running at up to 3 MHz enables fast host access from any microcontroller with a standard SPI bus
- 1 Kb on-chip EEPROM and 64-byte SRAM provide non-volatile configuration storage and volatile scratchpad in a single device
- Operates from 1.8 V minimum supply, making it ideal for low-voltage, battery-powered and energy-harvesting designs
- Integrated unique ID memory simplifies device authentication and board serialization without external EEPROM
- Interrupt output pin enables event-driven wake-up of host MCU for ultra-low-power sleep-and-wake applications
What is MCP79510T-I/MN used for?
The MCP79510T-I/MN is well-suited for IoT sensor nodes and data loggers that require accurate timekeeping with timestamped records stored in the built-in 64-byte SRAM between transmissions. Its 1.8 V minimum operating voltage and SPI interface make it a natural companion for low-power microcontrollers in wearable devices and remote wireless meters that rely on coin-cell batteries. The integrated EEPROM also allows the host system to store calibration constants or configuration flags alongside the real-time clock function.
What are the specifications of MCP79510T-I/MN?
| Manufacturer Package Code | TDFN-10 |
| Factory Lead Time | 8Weeks |
| YTEOL | 13 |
| Additional Feature | ALSO OPEARTES AT 1.8V MIN SUPPLY AT 3MHZ CLOCK FREQ |
| Clock Frequency-Max | 0.032MHz |
| Information Access Method | SERIAL(SPI) |
| Interrupt Capability | Y |
| JESD-30 Code | S-PDSO-N10 |
| JESD-609 Code | e3 |
| On Chip Data RAM Width | 8 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC10,.12SQ,20 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| RAM (words) | 64 |
| Screening Level | TS 16949 |
| Supply Current-Max | 5mA |
| Supply Voltage-Max | 3.6V |
| Supply Voltage-Min | 1.8V |
| Supply Voltage-Nom | 3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | DUAL |
| Time-Min | 1/100 SECOND |
| Volatile | NO |
| uPs/uCs/Peripheral ICs Type | TIMER, REAL TIME CLOCK |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Taiwan |
Where can I find the MCP79510T-I/MN datasheet?
MCP79510T-I/MN Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP79510T-I/MN?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What communication interface does the MCP79510T-I/MN use, and at what maximum clock speed can the host access it?
The MCP79510T-I/MN uses a standard SPI serial interface with a maximum clock frequency of 3 MHz when operating from a 1.8 V supply, and faster speeds at higher voltages. This makes it directly compatible with virtually any microcontroller SPI peripheral without level-shifting in 3.3 V systems, simplifying firmware integration and reducing component count in battery-powered data-logger or IoT edge-node designs.
How much on-chip memory does the MCP79510T-I/MN provide, and what can each memory block be used for?
The device integrates 1 Kb of EEPROM for non-volatile storage of configuration data or calibration constants, 64 bytes of SRAM as a volatile scratchpad for temporary data between sleep cycles, and a factory-programmed unique ID block for board serialization. Together, these three memory types eliminate the need for external EEPROM or FRAM in applications that require lightweight data retention alongside a real-time clock function.
Which compact package does the MCP79510T-I/MN use, and how does it help space-constrained wearable designs?
The part is housed in a TDFN-10 (S-PDSO-N10) no-lead surface-mount package, which typically measures 3 mm x 3 mm with a very low profile under 1 mm. This footprint is ideal for wearable health monitors, smart badges, and miniature data loggers where PCB real estate is limited to a few square centimeters and height clearance must stay below 2 mm above the board surface.
Can the MCP79510T-I/MN operate reliably from a coin-cell battery, and what supply voltage range does it support?
Yes. The MCP79510T-I/MN operates from 1.8 V to 5.5 V, covering the full discharge curve of a CR2032 coin cell (3 V nominal, down to roughly 2 V at end of life). Its 32.768 kHz oscillator consumes only a few microamps in timekeeping mode, allowing years of battery-backed operation in remote sensing nodes, access-control tokens, and portable instruments that require continuous time tracking without a main power source.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 100+ | $1.1300 | $113.00 |
| 1000+ | $1.0600 | $1060.00 |
| 5000+ | $1.0400 | $5200.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit