MCP6L1T-E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
Microchip MCP6L1T-E/OT is a single-channel voltage-feedback op-amp operating from 2.7 V to 6 V with 90 dB CMRR and 3 mV max offset voltage in SOT-23-5 package. It provides rail-to-rail output swing for low-power signal conditioning. Available with worldwide shipping.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6L1T-E/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.3481(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Single-channel voltage-feedback operational amplifier with 90 dB CMRR and 3000 µV maximum input offset voltage for precision signal conditioning
- Wide supply voltage range of 2.7 V to 6 V enables operation in both 3.3 V and 5 V battery-powered systems
- Tiny SOT-23-5 (5-pin) package with frequency compensation for space-constrained analog filter and amplifier designs
Applications
The MCP6L1T-E/OT is suited for portable sensor signal-conditioning circuits, single-supply filter stages, and low-power instrumentation front-ends that operate from 2.7 V to 6 V rails. Its 90 dB CMRR makes it a strong fit for bridge-sensor amplifiers in industrial and consumer measurement devices. The compact SOT-23-5 footprint allows tight placement near analog sensors on high-density PCBs.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Nom | 90dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 3000 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP5/6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE |
| Packing Method | TAPE AND REEL |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 2.3V/us |
| Supply Current-Max | 0.33mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 2800 |
| Wideband | NO |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia, Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What supply voltage range does the MCP6L1T-E/OT support and how does it affect battery-powered designs?
The MCP6L1T-E/OT operates from 2.7 V to 6 V, allowing direct use with single-cell Li-ion batteries at 3.6 V or standard 3.3 V and 5 V regulated rails. This flexibility reduces the need for voltage converters in portable measurement devices, lowering BOM cost and quiescent current.
How does the 90 dB CMRR of the MCP6L1T-E/OT benefit bridge-sensor applications?
A 90 dB CMRR means the MCP6L1T-E/OT rejects common-mode noise by a factor of over 31,000:1, which is critical for Wheatstone bridge pressure or strain-gauge sensors that produce small differential signals of a few millivolts riding on a large common-mode voltage of several volts.
For a compact wearable PCB, how small is the MCP6L1T-E/OT package footprint?
The MCP6L1T-E/OT uses the SOT-23-5 package, which measures approximately 2.9 mm × 1.6 mm, providing one of the smallest 5-pin op-amp footprints available. This makes it practical for wearable health monitors and hearing-aid circuits where available board area is under 10 mm².
When should a designer choose MCP6L1T-E/OT over a dual op-amp like the MCP6L2?
Choose the MCP6L1T-E/OT when only a single amplifier stage is needed and minimizing PCB area is the priority, since the SOT-23-5 package occupies about 4.6 mm² versus the 8-pin SOIC footprint of a dual device. Using a single-channel part also avoids unused amplifier sections that can introduce noise at 2.7 V to 6 V supplies.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3940 | $0.39 |
| 25+ | $0.3870 | $9.68 |
| 100+ | $0.3600 | $36.00 |
| 500+ | $0.3500 | $175.00 |
| 3000+ | $0.3481 | $1044.30 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”