MCP6H01T-E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
MCP6H01T-E/OT is a single voltage-feedback operational amplifier from Microchip with a 1.2 MHz gain-bandwidth product, 0.8 V/µs slew rate, and 100 dB typical CMRR, housed in a space-saving SOT-23-5 package. It operates from low supply voltages and features internal frequency compensation for stable closed-loop designs without external capacitors. Available from Microchip in tape-and-reel format with worldwide shipping.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6H01T-E/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.6000(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP6H01T-E/OT?
- 1.2 MHz gain-bandwidth product with 0.8 V/µs slew rate covers audio, sensor conditioning, and general-purpose active filter applications
- 100 dB typical CMRR and 84 dB minimum CMRR reject common-mode interference in differential signal paths
- SOT-23-5 package with internal frequency compensation simplifies layout and eliminates external stabilization components
What is MCP6H01T-E/OT used for?
MCP6H01T-E/OT is well suited for general-purpose signal conditioning, active low-pass filters, and buffer amplifiers in battery-powered portable devices operating from a single low-voltage supply. Its 1.2 MHz bandwidth covers audio preamplification, accelerometer signal chains, and ADC input buffers in industrial sensor nodes. The tiny SOT-23-5 footprint makes it an efficient choice for IoT modules, wearables, and compact measurement instruments where board area is at a premium.
What are the specifications of MCP6H01T-E/OT?
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 13Weeks |
| YTEOL | 14 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.025 µA |
| Common-mode Reject Ratio-Min | 84dB |
| Common-mode Reject Ratio-Nom | 100dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 3500 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP5/6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE |
| Packing Method | TR |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 0.8V/us |
| Supply Current-Max | 0.185mA |
| Supply Voltage Limit-Max | 17V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 1200 |
| Voltage Gain-Min | 56200 |
| Wideband | NO |
| ## MCP6H01T-E/OT Alternates Showing results | Image |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP6H01T-E/OT datasheet?
MCP6H01T-E/OT Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP6H01T-E/OT?
Compatible alternatives and drop-in replacements for MCP6H01T-E/OT:
Frequently Asked Questions
What gain-bandwidth product and slew rate does MCP6H01T-E/OT provide for audio filtering?
MCP6H01T-E/OT offers a 1.2 MHz gain-bandwidth product and a 0.8 V/µs slew rate, enabling unity-gain stable operation through the full audio band up to 20 kHz with comfortable margin. For a gain of 10 V/V the usable bandwidth is approximately 120 kHz, suitable for active anti-aliasing filters ahead of a 16-bit ADC sampling at up to 100 kHz.
How does the 25 nA maximum bias current of MCP6H01T-E/OT affect resistive feedback network design?
With a maximum input bias current of 0.025 µA (25 nA), a 100 kΩ feedback resistor introduces only 2.5 mV of additional offset error, well within the 3500 µV maximum input offset voltage specification. Designers can use feedback resistors up to roughly 100 kΩ without bias current becoming the dominant error source, keeping passive component values practical for space-constrained SMT designs in the SOT-23-5 package.
Is MCP6H01T-E/OT a reliable long-term choice for a high-volume consumer product?
Yes. MCP6H01T-E/OT carries a YTEOL (years to end-of-life) value of 14 years, indicating Microchip intends to supply this device well into the 2030s. The E-grade temperature suffix confirms extended industrial temperature coverage, and the T suffix designates tape-and-reel delivery in quantities suited for automated SMT assembly, making it a stable, low-risk BOM item for high-volume production.
When should a designer choose MCP6H01T-E/OT over a higher-bandwidth op-amp for a sensor interface?
MCP6H01T-E/OT's 1.2 MHz bandwidth is more than sufficient for most sensor conditioning chains sampling below 100 kHz, and its lower quiescent current versus wideband op-amps extends battery life in IoT nodes by several milliamps. If the signal bandwidth requirement is under 100 kHz and supply current budget is under 1 mA, MCP6H01T-E/OT is preferable to higher-frequency alternatives that draw 5–10 mA but add no useful bandwidth margin.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.8450 | $0.84 |
| 3+ | $0.6316 | $1.89 |
| 100+ | $0.6200 | $62.00 |
| 5000+ | $0.6000 | $3000.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit