MCP652-E/MF Microchip Integrated Circuit (Small Outline No-lead) In Stock
Microchip MCP652-E/MF is a dual 50 MHz auto-zero operational amplifier with rail-to-rail output, 200 µV maximum input offset voltage, and 68 dB minimum CMRR in a compact DFN-8 package. Designed for precision signal conditioning in industrial and automotive applications operating from 1.8 V to 5.5 V supply. Available in stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline No-lead
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP652-E/MF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.4920(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP652-E/MF?
- Dual 50 MHz gain-bandwidth product supports high-speed precision signal chains without external offset trimming
- Auto-zero architecture achieves 200 µV maximum input offset voltage for accurate DC and low-frequency measurements
- Rail-to-rail output swing maximizes dynamic range on single 1.8 V to 5.5 V supply rails
- Compact DFN-8 package with 3 mm x 3 mm footprint suits space-constrained industrial PCB designs
What is MCP652-E/MF used for?
The MCP652-E/MF is ideal for precision instrumentation amplifiers, sensor signal conditioning, and data acquisition front-ends where low offset voltage and wide bandwidth are both required. Its auto-zero feature makes it well-suited for thermocouple amplifiers, bridge sensor interfaces, and medical diagnostic equipment operating from low single-supply rails. The dual-channel configuration enables differential input stages and active filter designs in a single compact package.
What are the specifications of MCP652-E/MF?
| Manufacturer Package Code | DFN-8 |
| Factory Lead Time | 6Weeks |
| YTEOL | 7 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Common-mode Reject Ratio-Min | 68dB |
| Common-mode Reject Ratio-Nom | 84dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 200 µV |
| JESD-30 Code | S-PDSO-N8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | NO |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOLCC8,.12,25 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 30V/us |
| Supply Current-Max | 18mA |
| Supply Voltage Limit-Max | 6.5V |
| Supply Voltage-Nom (Vsup) | 2.5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 50000 |
| Voltage Gain-Min | 25118 |
| Wideband | NO |
| Package | Small Outline No-lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP652-E/MF datasheet?
MCP652-E/MF Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP652-E/MF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
How does the MCP652-E/MF auto-zero architecture reduce DC offset errors in precision measurement circuits?
The MCP652-E/MF uses a continuous auto-zero correction technique that periodically samples and cancels the internal offset voltage, keeping the effective input offset below 200 µV maximum over the full -40°C to +125°C temperature range. This eliminates the need for external trim potentiometers in bridge sensor amplifier designs, reducing BOM cost and board area.
Can MCP652-E/MF operate from a 3.3 V single supply in battery-powered sensor nodes?
Yes. The MCP652-E/MF operates from 1.8 V to 5.5 V single supply, making it fully compatible with 3.3 V microcontroller systems. At 3.3 V supply, the rail-to-rail output stage swings within millivolts of both supply rails, and the device draws low quiescent current, which extends battery life in portable sensor nodes and IoT edge devices sampling at moderate rates.
What common-mode rejection ratio does the MCP652-E/MF deliver for differential signal acquisition?
The MCP652-E/MF specifies a minimum CMRR of 68 dB and a typical CMRR of 84 dB. This level of common-mode rejection is sufficient to reject 50 Hz and 60 Hz power-line interference in industrial sensor interfaces, where differential signals from load cells or pressure sensors of 10 mV to 100 mV must be accurately amplified in noisy environments.
For a compact motor-control feedback PCB, how much board space does the DFN-8 package of MCP652-E/MF require?
The DFN-8 package used for the MCP652-E/MF measures 3 mm x 3 mm with a 0.5 mm lead pitch, occupying approximately 9 mm² of PCB footprint. This is roughly 40% smaller than an equivalent SOIC-8 package, making it a strong choice for space-constrained motor driver feedback and current sense amplifier stages in servo drives and robotics controllers.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.4920 | $0.49 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit