MCP6496UT-E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
The MCP6496UT-E/OT is a single rail-to-rail input and output operational amplifier from Microchip, featuring a gain-bandwidth product of 3 MHz and an input offset voltage of up to 1.6 mV. It operates from a 1.8 V to 5.5 V single supply and is housed in a 5-pin SOT-23 package. Designed for portable consumer electronics, sensor interfaces, and battery-powered signal conditioning circuits.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6496UT-E/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.1858(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Rail-to-rail input and output enabling full signal swing on low single-supply voltages from 1.8 V to 5.5 V
- 3 MHz gain-bandwidth product supporting audio-frequency and sensor signal amplification
- Low input offset voltage of 1.6 mV max for precision DC measurement applications
- High common-mode rejection ratio of 92 dB typical suppressing common-mode noise in differential sensing
- Compact 5-pin SOT-23 package minimizing board area in space-constrained portable designs
Applications
The MCP6496UT-E/OT is used in battery-powered portable devices and IoT sensor nodes where low supply voltage operation from 1.8 V to 5.5 V is required for amplifying small sensor signals from temperature, pressure, and light detectors. Its rail-to-rail input/output swing makes it ideal for single-supply signal conditioning stages in data acquisition front ends and active filter circuits. The part is also employed in audio preamplifier and microphone interface designs in consumer electronics requiring low quiescent current and compact packaging.
Specifications
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 6Weeks |
| YTEOL | 24 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 66dB |
| Common-mode Reject Ratio-Nom | 92dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 1600 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | NO |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP5/6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE, SHRINK PITCH |
| Packing Method | TR |
| Power | NO |
| Programmable Power | NO |
| Slew Rate-Nom | 40V/us |
| Supply Current-Max | 2.5mA |
| Supply Voltage Limit-Max | 6V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 30000 |
| Voltage Gain-Min | 177827.941 |
| Wideband | NO |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What supply voltage range does the MCP6496UT-E/OT support, and does it offer rail-to-rail operation?
The MCP6496UT-E/OT operates from a 1.8 V to 5.5 V single supply and provides rail-to-rail input and output swing. This means the input common-mode voltage can extend from below the negative rail to above the positive rail, and the output can swing within millivolts of both supply rails, maximizing dynamic range in low-voltage single-supply systems.
How does the 92 dB CMRR of the MCP6496UT-E/OT benefit differential sensor measurements?
A common-mode rejection ratio of 92 dB typical means the MCP6496UT-E/OT attenuates common-mode noise on differential input signals by a factor of approximately 63,000, which is critical in bridge sensor amplification and instrumentation circuits. This high CMRR helps maintain measurement accuracy within ±1 mV even in environments with 60 Hz power line interference or switching regulator noise at frequencies up to 1 MHz.
For a compact sensor front-end PCB, how does the SOT-23-5 package of MCP6496UT-E/OT compare in size to alternatives?
The 5-pin SOT-23 package measures approximately 2.9 mm x 1.6 mm, making it one of the smallest single op-amp packages available and about 50% smaller than an 8-pin SOIC alternative. This compact footprint allows placement close to sensors in tight layouts, minimizing trace length and reducing susceptibility to EMI-induced errors in wearable and handheld instrument designs.
When should MCP6496UT-E/OT be selected over a higher-bandwidth op-amp for audio or sensor applications?
The MCP6496UT-E/OT's 3 MHz gain-bandwidth product is sufficient for audio-frequency amplification up to 20 kHz with gains up to 150 V/V, and sensor signal conditioning up to several hundred kilohertz. Choosing it over a 100 MHz GBW op-amp avoids unnecessary power consumption, since the MCP6496UT-E/OT typically draws only 1 mA supply current, extending battery life in portable designs by 10× compared to faster op-amps.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.4200 | $0.42 |
| 10+ | $0.1922 | $1.92 |
| 25+ | $0.1890 | $4.72 |
| 50+ | $0.1858 | $9.29 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”