MCP6282-E/P Microchip Integrated Circuit (Dual-In-Line Packages) In Stock
Microchip MCP6282-E/P is a dual CMOS operational amplifier with 5 MHz gain-bandwidth product, rail-to-rail input and output, operating from 2.5 V to 5.5 V single supply. It offers 5 nA input bias current and 65 dB minimum CMRR in an 8-pin PDIP package for signal conditioning and active filter designs.
- Manufacturer
- Microchip
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6282-E/P Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.7440(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Dual op-amp in 8-pin PDIP for through-hole prototyping and production
- 5 MHz gain-bandwidth product suitable for audio and sensor signal chains
- Rail-to-rail input and output for maximum dynamic range on 3.3 V and 5 V rails
- Ultra-low input bias current of 5 nA for high-impedance sensor interfaces
- Single-supply operation from 2.5 V to 5.5 V covers 3.3 V and 5 V systems
- Common-mode rejection ratio minimum 65 dB, typical 85 dB
Applications
The MCP6282-E/P is suited for dual-channel sensor amplification, active audio filters, and instrumentation front-ends in 3.3 V or 5 V embedded systems. Its rail-to-rail output swing and 5 MHz bandwidth make it a practical choice for low-voltage data acquisition stages, portable medical devices, and educational prototyping platforms using through-hole assembly.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | PDIP-8 |
| Factory Lead Time | 11Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Common-mode Reject Ratio-Min | 65dB |
| Common-mode Reject Ratio-Nom | 85dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 5000 µV |
| JESD-30 Code | R-PDIP-T8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | DIP8,.3 |
| Package Shape | RECTANGULAR |
| Package Style | IN-LINE |
| Packing Method | TUBE |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 2.5V/us |
| Supply Current-Max | 1.14mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | NO |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | THROUGH-HOLE |
| Terminal Pitch | 2.54mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 5000 |
| Voltage Gain-Min | 31620 |
| Wideband | NO |
| Package | Dual-In-Line Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What bandwidth does MCP6282-E/P deliver at a closed-loop gain of 10 in an active filter design?
With a 5 MHz gain-bandwidth product, the MCP6282-E/P provides approximately 500 kHz of usable bandwidth at a gain of 10. This is sufficient for audio-band active filters up to 20 kHz and sensor signal conditioning stages operating well below the 500 kHz ceiling.
Can MCP6282-E/P drive both channels simultaneously from a single 3.3 V supply without additional bias circuitry?
Yes. The MCP6282-E/P supports single-supply operation from 2.5 V to 5.5 V, so both amplifier channels run directly from a 3.3 V rail. Its rail-to-rail output allows the output to swing within millivolts of the supply and ground rails, maximizing dynamic range without a split supply.
How does the PDIP-8 package of MCP6282-E/P compare in board density to an SOIC-8 version of the same circuit?
The PDIP-8 package occupies a larger through-hole footprint of 9.27 mm × 6.35 mm with 2.54 mm pin pitch, versus an SOIC-8 body of 4.9 mm × 3.9 mm with 1.27 mm pitch. For space-constrained SMT designs the MCP6282T-E/SN in SOIC-8 is the recommended alternative to the DIP form factor.
Is MCP6282-E/P compliant with RoHS and lead-free assembly requirements for export markets?
Yes, the MCP6282-E/P carries Microchip's Pb-free designation and meets RoHS Directive requirements, making it suitable for consumer, industrial, and medical product families that require lead-free solder assembly. The part uses a halide-free PDIP-8 molding compound consistent with e3 JESD-609 coding.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.1500 | $1.15 |
| 25+ | $0.9500 | $23.75 |
| 100+ | $0.8500 | $85.00 |
| 5040+ | $0.7510 | $3785.04 |
| 7500+ | $0.7490 | $5617.50 |
| 10020+ | $0.7440 | $7454.88 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”