MCP6241T-E/OT Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock
The MCP6241T-E/OT is a single-channel, rail-to-rail output operational amplifier with a 550 kHz gain-bandwidth product and low quiescent current, operating from 1.8 V to 5.5 V. Packaged in a 5-pin SOT-23, it suits portable sensing, signal conditioning, and battery-powered applications requiring compact, low-power op-amp solutions.
- Manufacturer
- Microchip
- Package
- SOT23 (5-Pin)
- Pin Count
- 5
- Lifecycle
- ACTIVE
- Datasheet
- MCP6241T-E/OT Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.2700(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP6241T-E/OT?
- Rail-to-rail output swing for maximum dynamic range at low supply voltages
- 550 kHz gain-bandwidth product for precision signal conditioning
- Low quiescent current for extended battery life in portable designs
- 1.8 V to 5.5 V supply voltage range covering single-cell to dual-cell battery systems
- 60 dB minimum CMRR for common-mode noise rejection
- Compact 5-pin SOT-23 package ideal for space-constrained PCBs
What is MCP6241T-E/OT used for?
The MCP6241T-E/OT is widely used in portable instrumentation, sensor signal conditioning, and battery-powered IoT edge nodes where low supply voltage and minimal quiescent current are essential. Its rail-to-rail output enables accurate ADC driving in 1.8 V systems where every millivolt of output swing matters. It also suits single-supply active filter stages and transimpedance amplifiers in industrial and consumer handheld devices.
What are the specifications of MCP6241T-E/OT?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOT-23-5 |
| Factory Lead Time | 6Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 75dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 7000 µV |
| JESD-30 Code | R-PDSO-G5 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP5/6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE |
| Packing Method | TAPE AND REEL |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 0.3V/us |
| Supply Current-Max | 0.07mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 550 |
| Voltage Gain-Min | 31620 |
| Wideband | NO |
| ## MCP6241T-E/OT Alternates Showing results | Image |
| Package | SOT23 (5-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia, Thailand |
Where can I find the MCP6241T-E/OT datasheet?
MCP6241T-E/OT Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP6241T-E/OT?
Compatible alternatives and drop-in replacements for MCP6241T-E/OT:
suggested
suggested
suggested
suggested
Frequently Asked Questions
How low can the MCP6241T-E/OT supply voltage go for single-cell lithium-ion battery designs?
The MCP6241T-E/OT operates from 1.8 V to 5.5 V, making it compatible with a single lithium-ion cell discharged to approximately 3.0 V or alkaline cells at end of life near 1.8 V. Its rail-to-rail output ensures usable dynamic range across the full supply window, maximizing battery utilization in portable sensor devices.
What CMRR level does MCP6241T-E/OT provide, and how does this affect sensor bridge designs?
The MCP6241T-E/OT achieves a minimum CMRR of 60 dB and a nominal CMRR of 75 dB. In resistive bridge sensor amplification, a 75 dB CMRR suppresses common-mode interference by a factor of over 5,600, significantly reducing 50 Hz or 60 Hz mains noise coupling in industrial pressure or strain-gauge measurements operating from a 3.3 V or 5 V supply.
Can MCP6241T-E/OT drive a 12-bit ADC input directly without additional buffering?
Yes. The MCP6241T-E/OT features rail-to-rail output and an input offset voltage maximum of 7,000 µV, which introduces less than 0.17% full-scale error when driving a 12-bit ADC from a 5 V reference. For tighter offset budgets, the MCP6V41 auto-zero variant reduces offset below 10 µV; both share the same 5-pin SOT-23 footprint for easy design swapping.
For a space-constrained wearable PCB, what assembly advantage does the SOT-23-5 package offer?
The 5-pin SOT-23 package body measures approximately 2.9 mm x 1.6 mm, one of the smallest standard op-amp footprints. This enables multiple MCP6241T-E/OT amplifiers to fit in under 10 mm² of board area, making it practical for multi-channel sensor front-ends in wearable health monitors and smartwatch accessories where board space is premium.
What lead time and RoHS status should procurement teams expect when ordering MCP6241T-E/OT?
The MCP6241T-E/OT carries a Pb-free code of Yes, confirming RoHS and lead-free compliance for EU and international markets. Factory lead time is listed as 6 weeks, so volume orders should be placed with buffer for embedded sensor product builds, and distributors typically stock the tape-and-reel SOT-23-5 variant for quantities from 1,000 to 3,000 units.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3693 | $0.37 |
| 6+ | $0.2756 | $1.65 |
| 5000+ | $0.2700 | $1350.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit