MCP6143T-E/CH Microchip Integrated Circuit (SOT23 (6-Pin)) In Stock
MCP6143T-E/CH by Microchip is a single, low-power operational amplifier operating from 1.6 V to 5.5 V with 100 kHz gain-bandwidth product and rail-to-rail output in a 6-pin SOT-23 package. It features a maximum input bias current of 5 pA and 80 dB typical CMRR, ideal for battery-powered sensor conditioning circuits. Available worldwide with fast shipping from authorized distributors.
- Manufacturer
- Microchip
- Package
- SOT23 (6-Pin)
- Pin Count
- 6
- Lifecycle
- ACTIVE
- Datasheet
- MCP6143T-E/CH Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.5800(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Ultra-low supply voltage operation from 1.6 V to 5.5 V suits single-cell battery designs with minimal dropout
- 5 pA maximum input bias current enables high-impedance sensor interfaces without loading error
- 100 kHz gain-bandwidth product with 62 dB minimum CMRR in compact SOT-23-6 package saving PCB space
Applications
MCP6143T-E/CH is used in wearable health monitors and portable sensors where supply voltages as low as 1.6 V must be supported and quiescent current must be minimized. Its 5 pA input bias current makes it suitable for high-impedance pH probe amplifiers and photodiode transimpedance stages without introducing measurement error. The SOT-23-6 package is well-suited for space-constrained IoT node designs.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | SOT-23-6 |
| Factory Lead Time | 6Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Common-mode Reject Ratio-Min | 62dB |
| Common-mode Reject Ratio-Nom | 80dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 3000 µV |
| JESD-30 Code | R-PDSO-G6 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSOP6,.11,37 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, LOW PROFILE |
| Packing Method | TAPE AND REEL |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 24000V/us |
| Supply Current-Max | 0.001mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.95mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 100 |
| Voltage Gain-Min | 56200 |
| Wideband | NO |
| Package | SOT23 (6-Pin) |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the input bias current of MCP6143T-E/CH, and why does it matter for high-impedance sensor interfaces?
MCP6143T-E/CH specifies a maximum input bias current of 0.005 µA (5 pA), which produces less than 5 mV of error across a 1 GΩ source impedance. This makes it suitable for pH electrode amplifiers, photodiode transimpedance circuits, and capacitive humidity sensors where source impedances exceed 10 MΩ and error budgets are tight in battery-powered systems.
How does the 1.6 V minimum supply of MCP6143T-E/CH enable single-cell energy harvesting designs?
Operating from as low as 1.6 V, MCP6143T-E/CH functions directly from a single alkaline or NiMH cell through its full discharge cycle, which typically ends near 1.0 V to 1.2 V. This allows the op-amp to remain active in energy-harvesting IoT nodes powered by piezoelectric or thermoelectric generators that produce 1.6 V to 3.3 V, avoiding a boost converter and extending battery life by reducing quiescent current overhead.
How does MCP6143T-E/CH CMRR compare to standard general-purpose op-amps for bridge sensor measurements?
MCP6143T-E/CH achieves 80 dB typical CMRR (62 dB minimum), which is on par with general-purpose amplifiers like LM358 but in a much smaller SOT-23-6 package footprint. For a Wheatstone bridge application running from a 3.3 V supply, this CMRR rejects common-mode noise by a factor of 10,000 at DC, enabling millivolt-level bridge differential signals to be amplified accurately without external resistor matching networks.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.7800 | $0.78 |
| 25+ | $0.6600 | $16.50 |
| 100+ | $0.5800 | $58.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”