MCP6142-I/SN Microchip Integrated Circuit (Small Outline Packages) In Stock
Microchip MCP6142-I/SN is a dual channel op-amp operating from 1.6 V supply with 100 kHz gain-bandwidth product and 0.005 µA max bias current in an 8-pin SOIC package. Its ultra-low supply voltage and nanoamp input bias suit battery-powered sensor signal conditioning. Available in stock with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP6142-I/SN Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.6880(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP6142-I/SN?
- Dual op-amp operating from 1.6 V single supply, ideal for single-cell battery and energy-harvesting applications
- Ultra-low 0.005 µA maximum input bias current for accurate high-impedance sensor signal conditioning
- 62 dB minimum CMRR and 100 kHz gain-bandwidth product in a compact SOIC-8 package
What is MCP6142-I/SN used for?
The MCP6142-I/SN is suited for battery-powered portable instruments, wearable biosensors, and low-voltage data acquisition front-ends where signal conditioning must operate reliably from a 1.6 V single-cell supply. Its nanoamp input bias current makes it ideal for interfacing with high-impedance pH electrodes, strain gauges, and photodiode transimpedance amplifier stages. The dual-channel configuration in a single SOIC-8 package reduces BOM cost and board area in compact analog signal chains.
What are the specifications of MCP6142-I/SN?
| Pbfree Code | Yes |
| Manufacturer Package Code | SOIC-8 |
| Factory Lead Time | 5Weeks |
| YTEOL | 9 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Common-mode Reject Ratio-Min | 62dB |
| Common-mode Reject Ratio-Nom | 80dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 3000 µV |
| JESD-30 Code | R-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP8,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Nom | 24000V/us |
| Supply Current-Max | 0.002mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | INDUSTRIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 100 |
| Voltage Gain-Min | 56200 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Where can I find the MCP6142-I/SN datasheet?
MCP6142-I/SN Datasheet DownloadOfficial datasheet from Microchip
What are equivalent replacements for MCP6142-I/SN?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the minimum supply voltage and gain-bandwidth product of the MCP6142-I/SN?
The MCP6142-I/SN operates from a minimum supply voltage of 1.6 V and has a gain-bandwidth product of 100 kHz. This combination allows it to amplify low-frequency sensor signals up to audio-band frequencies in single-cell battery designs, such as those powered by a 1.5 V alkaline or 1.8 V lithium coin cell.
How does the 0.005 µA input bias current of MCP6142-I/SN benefit high-impedance sensor interfaces?
With a maximum input bias current of only 0.005 µA (5 nA), the MCP6142-I/SN introduces negligible loading error on high-impedance sources such as pH electrodes, piezoelectric sensors, and photodiodes. This low bias current prevents significant voltage offset at the amplifier input, preserving measurement accuracy in precision sensor signal conditioning circuits operating from 1.6 V.
For a wearable ECG front-end operating at 1.8 V, what does the MCP6142-I/SN's CMRR specification offer?
The MCP6142-I/SN provides a minimum 62 dB CMRR (typical 80 dB), which effectively rejects common-mode power-line interference and motion artifacts on both ECG electrode inputs. At a 1.8 V supply, this rejection level helps maintain signal fidelity in wearable biopotential amplifiers where differential biopotential signals are only a few millivolts against large common-mode noise.
When would a designer choose MCP6142-I/SN over a rail-to-rail op-amp with higher bandwidth?
MCP6142-I/SN is the right choice when the priority is operation below 1.8 V with nanoamp bias currents rather than maximum bandwidth. In applications like low-power glucose monitors, environmental gas sensors, or thermocouple amplifiers where signals are below 10 kHz and supply is a 1.6 V to 3.6 V battery, the MCP6142-I/SN's 100 kHz GBP is sufficient and its ultra-low bias current outweighs the advantages of wider-bandwidth alternatives.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $1.0400 | $1.04 |
| 5+ | $0.9400 | $4.70 |
| 25+ | $0.8400 | $21.00 |
| 100+ | $0.7800 | $78.00 |
| 5000+ | $0.6900 | $3450.00 |
| 7500+ | $0.6880 | $5160.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit