MCP6054-E/SL Microchip Integrated Circuit (Small Outline Packages) In Stock
MCP6054-E/SL is a quad 1.8 V rail-to-rail operational amplifier from Microchip with 300 kHz gain-bandwidth product, 91 dB typical CMRR, and 0.0001 µA input bias current at 25°C in a SOIC-14 package. It is RoHS-compliant and operates across an extended industrial temperature range. Available from stock worldwide with fast shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- MCP6054-E/SL Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.7212(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Quad 1.8 V single-supply op-amp with 300 kHz gain-bandwidth product for low-power sensor signal conditioning
- 91 dB typical CMRR with 0.0001 µA input bias current at 25°C for high-accuracy, low-noise measurements
- Rail-to-rail input and output swing maximizes dynamic range on 1.8 V to 6 V single or dual supply systems
- SOIC-14 package houses 4 independent channels with extended temperature range for industrial and portable applications
Applications
MCP6054-E/SL is used in low-power portable instruments, wearable sensors, and battery-operated IoT nodes where a 1.8 V supply quad op-amp with 300 kHz bandwidth is needed for signal conditioning. Its 0.0001 µA bias current and 91 dB CMRR make it an excellent front-end amplifier for pH sensors, temperature bridges, and photodiode current-to-voltage converters in medical and environmental monitoring systems. The four channels in one SOIC-14 device enable compact multi-channel filter and amplifier chain designs with minimal PCB area.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | SOIC-14 |
| Factory Lead Time | 7Weeks |
| YTEOL | 8 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.005 µA |
| Bias Current-Max (IIB) @25C | 0.0001 µA |
| Common-mode Reject Ratio-Min | 74dB |
| Common-mode Reject Ratio-Nom | 91dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 150 µV |
| JESD-30 Code | R-PDSO-G14 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | YES |
| Micropower | YES |
| Number of Functions | 4 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP14,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Slew Rate-Nom | 0.15V/us |
| Supply Current-Max | 0.18mA |
| Supply Voltage Limit-Max | 7V |
| Supply Voltage-Nom (Vsup) | 3V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Unity Gain BW-Nom | 385 |
| Voltage Gain-Min | 56200 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What gain-bandwidth product and minimum supply voltage does MCP6054-E/SL support for low-power designs?
MCP6054-E/SL provides a 300 kHz gain-bandwidth product and can operate from as low as a 1.8 V single supply, making it ideal for low-power embedded systems and battery-operated sensor nodes. At a gain of 10, the usable signal bandwidth is approximately 30 kHz, which covers most audio, biomedical, and slow industrial sensor signal conditioning requirements.
How does the 0.0001 µA input bias current of MCP6054-E/SL at 25°C enable high-impedance transducer interfacing?
With a bias current of only 0.0001 µA (100 pA) at 25°C, MCP6054-E/SL introduces negligible offset error even across source resistances of 10 MOhm or more, which is critical for pH electrode, piezoelectric sensor, and photodiode applications. This extremely low leakage current preserves measurement accuracy below 1 mV offset error in high-impedance signal paths operating from a 1.8 V or 3.3 V supply.
For a 4-channel active filter board running at 1.8 V, how does MCP6054-E/SL's rail-to-rail output benefit the design?
The rail-to-rail output swing of MCP6054-E/SL allows the output to reach within a few millivolts of the 1.8 V supply rail and ground, maximizing the usable signal dynamic range in a 1.8 V system. This is especially important for active filter stages where headroom is limited, preventing clipping and distortion on low-amplitude signals and preserving the signal-to-noise ratio across all 4 channels in a single SOIC-14 package.
When would MCP6054-E/SL be chosen over MCP6024-I/SL for an industrial sensor amplifier design?
MCP6054-E/SL is preferred over MCP6024-I/SL when the design must operate from a 1.8 V supply, as MCP6024-I/SL has a higher minimum supply of 2.5 V. Additionally, MCP6054-E/SL's 300 kHz gain-bandwidth product and 0.0001 µA bias current at 25°C suit energy-harvesting nodes and coin-cell-powered sensors where lower power consumption and compatibility with 1.8 V core MCU I/O levels are design priorities.
Related Guides
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $2.2900 | $2.29 |
| 10+ | $2.0800 | $20.80 |
| 25+ | $2.0100 | $50.25 |
| 57+ | $1.8444 | $105.13 |
| 100+ | $1.7400 | $174.00 |
| 285+ | $1.7212 | $490.54 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”