MCP602P Microchip Integrated Circuit (Dual-In-Line Packages) In Stock
Dual CMOS operational amplifier with 2.7 V to 6 V single-supply operation and rail-to-rail output swing for low-power signal conditioning. Offers unity-gain stable performance with low supply current in a standard 8-pin DIP package. Available from authorized distributors with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Dual-In-Line Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- MCP602P Datasheet PDF
- Category
- Integrated Circuit
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of MCP602P?
- 2.7 V to 6 V single-supply operation supports 3.3 V and 5 V microcontroller-based analog front-ends without a negative rail
- Rail-to-rail output swing maximizes dynamic range on low-voltage single-supply systems with restricted signal headroom
- Dual op-amp configuration in one 8-pin DIP package reduces component count versus two single op-amps in discrete packages
- Low supply current CMOS architecture extends battery life in portable sensor and data acquisition systems
What is MCP602P used for?
MCP602P is suited for single-supply analog signal conditioning in battery-powered portable instruments, sensor interface boards, and microcontroller-based data acquisition systems operating from 3.3 V or 5 V rails. Its rail-to-rail output allows maximum signal swing within the constrained supply headroom of low-voltage designs, making it effective for buffering ADC inputs and driving resistive loads. The dual configuration in a through-hole 8-pin DIP package simplifies prototyping and educational circuit designs where ease of assembly matters.
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
What are equivalent replacements for MCP602P?
Compatible alternatives and drop-in replacements for MCP602P:
Frequently Asked Questions
What supply voltage range does MCP602P support, and can it operate from a single 3.3 V rail in a microcontroller circuit?
MCP602P operates from a single supply of 2.7 V to 6 V, so a 3.3 V rail is well within its specified range. This makes it compatible with 3.3 V microcontroller systems such as those based on ARM Cortex-M or PIC32 devices, allowing direct single-supply ADC buffering without a negative voltage rail.
How does MCP602P's rail-to-rail output benefit sensor signal conditioning at 5 V single supply?
Rail-to-rail output allows the output voltage to swing to within a few millivolts of both ground and the 5 V supply, maximizing the usable output span to nearly 5 V peak-to-peak. This is critical when driving a 10-bit or 12-bit ADC with a 0 V to 5 V reference, since any headroom loss directly reduces effective dynamic range and reduces ADC code utilization.
How does MCP602P compare to MCP601 for designs needing 2 op-amp channels on a single supply?
MCP602P integrates 2 independent op-amp channels in a single 8-pin DIP package, whereas MCP601 provides only 1 channel in an 8-pin package. Using MCP602P halves the package count, reducing PCB area by approximately 50% and simplifying routing for dual-channel applications such as differential amplifiers, instrumentation front-ends, or active filter stages that require 2 op-amp stages.
Related Guides
CDSOT23-SM712 RS-485 Interface Protection Design Guide
Design robust RS-485 protection with CDSOT23-SM712 using correct clamping, placement, grounding, termination, and surge coordination.
Jul 17, 2026
CR0805-FX-10R0ELF 10 Ohm 0805 Resistor Design Guide
Design CR0805-FX-10R0ELF into 0805 circuits with practical power, pulse, thermal, layout, tolerance, and sourcing checks.
Jul 17, 2026
How to Choose Würth Elektronik 150141-Series SMD Indicator LEDs
Choose 150141RS73100 and related Würth 150141 LEDs by color, brightness, 3528 package fit, drive margin, and procurement controls.
Jul 15, 2026
Molex 53398-0371 Selection Guide: Choosing a 3-Circuit Wire-to-Board Header
Choose Molex 53398-0371 by circuit count, mating system, derating, PCB geometry, assembly needs, and exact-suffix sourcing.
Jul 15, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
More from Microchip
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit