MCP6009T-E/ST Microchip Integrated Circuit (Small Outline Packages) In Stock
Microchip MCP6009T-E/ST is a quad rail-to-rail op-amp with 1 MHz gain-bandwidth and 60 dB minimum CMRR in a TSSOP-14 package. Input offset voltage max is 1600 µV across the extended E temperature range. Available in tape-and-reel with worldwide shipping.
- Manufacturer
- Microchip
- Package
- Small Outline Packages
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- MCP6009T-E/ST Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.2272(MOQ 25)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Quad op-amp with 1 MHz gain-bandwidth product for multi-channel signal conditioning
- Rail-to-rail input and output for maximum dynamic range on low-voltage supplies
- 60 dB minimum CMRR (76 dB typical) for excellent common-mode noise rejection
- TSSOP-14 package enables compact PCB layout for space-constrained designs
- Extended E temperature grade covers industrial operating conditions
Applications
The MCP6009T-E/ST is well suited for battery-powered sensor interfaces and portable industrial instruments where four independent 1 MHz amplifier channels are needed from a single low-power device. It excels in active filter stages, transimpedance amplifiers for photodetectors, and signal conditioning chains in data-acquisition systems requiring rail-to-rail output swing. The TSSOP-14 package and extended temperature range also make it practical for automotive sensor modules and compact embedded control boards.
Specifications
| Manufacturer Package Code | TSSOP-14 |
| Factory Lead Time | 1Week |
| YTEOL | 19 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Common-mode Reject Ratio-Min | 60dB |
| Common-mode Reject Ratio-Nom | 76dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 1600 µV |
| JESD-30 Code | R-PDSO-G14 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | YES |
| Number of Functions | 4 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP14,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Packing Method | TR |
| Power | NO |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Slew Rate-Nom | 1.9V/us |
| Supply Current-Max | 0.28mA |
| Supply Voltage Limit-Max | 6V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 1000 |
| Voltage Gain-Min | 177827 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the gain-bandwidth product of MCP6009T-E/ST and how does it affect filter design?
The MCP6009T-E/ST has a 1 MHz gain-bandwidth product, meaning a single stage configured for 10x gain retains a usable bandwidth of approximately 100 kHz. This makes it suitable for active low-pass and band-pass filter stages in audio processing, sensor signal conditioning, and data-acquisition front ends operating below 100 kHz.
How does the rail-to-rail architecture of MCP6009T-E/ST benefit low-supply-voltage sensor interfaces?
With rail-to-rail input and output operation, the MCP6009T-E/ST can accept and drive signals that swing within millivolts of both supply rails. On a 3.3 V single supply, the output can reach within a few millivolts of 0 V and 3.3 V, maximizing the usable dynamic range and improving ADC utilization in 12-bit or 16-bit data-acquisition systems.
What package does MCP6009T-E/ST use and how much board space does it save versus discrete alternatives?
The MCP6009T-E/ST ships in a TSSOP-14 package measuring approximately 5.0 mm x 4.4 mm, which is roughly 70% smaller in footprint than a 14-pin DIP package. Consolidating all 4 op-amp channels into one TSSOP-14 device saves significant board area compared to using discrete single or dual op-amp packages, while the tape-and-reel format supports automated SMT assembly at 1 week factory lead time.
Related Guides
CL31A107MQHNNNE 1206 100 uF MLCC Selection Guide
How to choose CL31A107MQHNNNE and related 1206 MLCCs for low-voltage bulk capacitance and regulator stability.
Jul 2, 2026
CL05B103KB5NNNC 0402 10 nF X7R MLCC Selection Guide
How to choose CL05B103KB5NNNC and related 0402 MLCCs for bypassing, filtering, voltage derating, and sourcing.
Jul 2, 2026
ADAQ7768-1 Design Guide for Precision Vibration and Dynamic Signal Measurement
Design ADAQ7768-1 precision data acquisition channels for vibration and dynamic sensing with the right bandwidth, reference, clock, and layout choices.
Jun 30, 2026
AD5204BRZ10 Design Guide for SPI-Controlled Gain and Offset Calibration
Design AD5204BRZ10 digital potentiometer calibration loops with bounded trim span, safe wiper current, clean SPI routing, and reliable startup codes.
Jun 30, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 25+ | $0.3300 | $8.25 |
| 100+ | $0.3000 | $30.00 |
| 2500+ | $0.2730 | $682.50 |
| 15000+ | $0.2297 | $3445.50 |
| 25000+ | $0.2284 | $5710.00 |
| 50000+ | $0.2272 | $11360.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.”